Abstract:The nature of plastic deformation across grain boundaries in α-titanium has been studied using instrumented sphero-conical nanoindentation in complement with crystal plasticity modeling. Following crystal orientation mapping using electron backscattered diffraction, indention was preformed (i) in the center of grains to mimic single crystal indentation and (ii) near grain boundaries to carry out bicrystal experiments. The pile-up topography that forms as a function of nanoindentation axis was characterized using atomic force microscopy (AFM). Crystal plasticity fi nite element simulations were carried out iteratively by varying the slip parameters until a best fi t was found between the experimentally measured single crystal pile-up topographies and the simulated single crystal pile-up topographies of several orientations. AFM characterization of bicrystal nanoindents revealed changes in the pileup topographies compared to those for single crystal nanoindents carried out in the same grain. In general, the pile-up topographies were not strongly infl uenced by low angle grain boundaries, indicating signifi cant strain transfer across the boundaries. In contrast, many high angle boundaries strongly infl uenced the pile-up morphology, with changes in the pile-ups noted in both the grain containing the pile-up and in the neighboring grain. The ability to accurately simulate the infl uence of grain boundaries pile-up development was examined by carrying out CPFE simulations of bicrystal nanoindentation. Direct comparison of the AFM-measured topographies with simulated topographies reveals that the general nature of bicrystal pile-up topography is well simulated, but that in general, the measured pile-up transfer is somewhat smaller than the simulated pile-up transfer. The results of the study will be discussed in terms of a number of generalized slip transfer criteria. This research was supported the National Science Foundation through a Materials World Network Grant DMR-1108211 and the complementary Deutsche Forchungsgemeinschaft grant ZA523/3-1.

Impurity (Fe, Cl, and P)-Induced Grain Boundary and Secondary Phases in Commercially Pure Titanium (CP-Ti)

Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium

Significant alpha-phase growth confinement in Grade 4 titanium and substantial beta-phase refinement in Grade 7 titanium

ASB induced phase transformation in high oxygen doped commercial purity Ti

The role of \b{eta} pockets resulting from Fe impurities in hydride formation in titanium

Impurity Scavenging from Powder Metallurgy Titanium Alloys by Rare Earth Elements

In situ TEM observations of thickness effect on grain growth in pure titanium thin films

Phase transformation induced twinning in commercially pure titanium: An in-situ study

Texture Evolution and Mechanical Behavior of Commercially Pure Ti Processed Via Pulsed Electric Current Treatment

Influence of Impurities on Phase Stability of Martensites in Titanium

Effect of abnormal grain growth on microstructure and mechanical properties of friction stir welded CP-Ti plates

Modification of the Α-Ti Laths to Near Equiaxed Α-Ti Grains in As-Sintered Titanium and Titanium Alloys by a Small Addition of Boron

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit.

Phase Transformation, Microstructural Evolution and Tensile Properties of a TiH2-Based Powder Metallurgy Pure Titanium

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure

Phase Precipitation Behavior During Isothermal Deformation in Β-Quenched Near Beta Titanium Alloy Ti-7333

Phase transformation generating coherent twin boundaries in titanium alloys

Formation Mechanism of Titanium Solid Solution and Its Influence on Equiaxed Behavior of Α Phase of Ti–5Al–5Mo–5Cr–2Zr-xNb Alloys

Quantification of ? phase strengthening in titanium alloys: Crystal plasticity model incorporating ?/? heterointerfaces

Quantification of α phase strengthening in titanium alloys: Crystal plasticity model incorporating α/β heterointerfaces

Characterization of Grain Boundary Deformation Processes in Commercial Purity Titanium Using Nanoindentation and Crystal Plasticity Modeling