Abstract:Void distribution maps and corresponding mean Feret diameter. Void defect is prevalent during the composite manufacturing process and may reduce the mechanical properties of composite structures, while limited information about three‐dimensional void distribution and evolution can be found due to the difficulties in void observation. In this work, void defects at different positions were detected and analyzed using x‐ray microtomography (XRM), and the random forest algorithm was implemented for segmenting components of CFRP samples. Results showed a trend of gradual rising porosity in the axial direction, with an increase of ~250% of porosity at the outlet of resin injection compared to the one at the inlet during the composite manufacturing process. The voids mainly featured with microscale between carbon fibers, with less distribution between fiber bundles and resin‐rich zones. Void defects achieved aggregation at the middle position of manufactured laminate, which is probably related to pressure interception. In the axial direction, the proportion of large‐diameter voids gradually increased, and a large volume of connected voids appeared near the outlet. Due to the shear deformation of resin and fiber and the pressure gradient effect, most of the voids showed stripe shape. The spatial orientation of voids was predominantly along the direction of resin flow and fluctuated due to fiber curl. Highlights 3D void characteristics in CFRP were studied using the XRM technique. Void formation and the effects of fibers on void morphology were analyzed. Dynamic void transport mechanisms during CFRP manufacturing were studied. Location and morphology of voids are helpful for CFRP damage modeling. The effective partitioning of CFRP was achieved using a random forest algorithm.

Influence of fabric shear and flow direction on void formation during resin transfer molding

Study on Void Formation in Multi-Layer Woven Fabrics

MECHANISM OF VOID FORMATION IN TEXTILE PREFORM-MULTI-LAYER WOVEN FABRICS

Modeling of Void Formation Based on Non-isothermal Conditions in Liquid Composite Molding for Plain-weave Fabric

Micro-mesoscopic Prediction of Void Defect in 3D Braided Composites

Prediction of Void Growth and Fiber Volume Fraction Based on Filament Winding Process Mechanics

The Influence of Void Distribution on Transverse Mechanical Properties of Unidirectional Composites

Numerical Simulation of the Influence of Fibrous Structure on Resin Filling in RTM Process

Influence of Voids Presence on Mechanical Properties of 3D Textile Composites

Voids formation and their effects on mechanical properties in thermoformed carbon fiber fabric-reinforced composites

Numerical Evaluation on the Influence of Void Defects and Interphase on the Thermal Expansion Coefficients of Three-Dimensional Woven Carbon/carbon Composites

Void Configuration-Induced Change in Microstructure and Deformation Mechanisms of Nano-Porous Materials

Influence of irregular-void on transverse tensile mechanical properties of composites

Study of Resin Flow Behavior in Vari Molding Process of Glass Fiber Woven Reinforced Composite Materials

Microstructures Failure Analysis of Fiber Reinforced Composites with Various Void Types

Effect of Nesting on the Out-Of-Plane Permeability of Unidirectional Fabrics in Resin Transfer Molding

Evaluation of Mechanical Behaviour of Unidirectional Fibre-Reinforced Composites Considering the Void Morphology

Numerical Simulation of Edge Effect in Resin Transfer Molding for Plain-weave Fabric

Void Formation Model and Measuring Method of Void Formation Condition During Hot Pressing Process

Micro‐mesoscopic analysis of 3D void formation and evolution in CFRP composite using high‐resolution x‐ray microtomography

Three-Dimensional Numerical Simulation of Meso-Scale-Void Formation During the Mold-Filling Process of LCM