Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Irradiation Behavior Study of U–Mo/Al Dispersion Fuel with High Energy Xe

TEM and XAS Investigation of Fission Gas Behaviors in U-Mo Alloy Fuels Through Ion Beam Irradiation

The irradiation behavior of atomized U-Mo alloy fuels at high temperature

Irradiation behavior of ground and atomized U-7Mo dispersion fuels irradiated to low burnup

Characterization of High Energy Xe Ion Irradiation Effects in Single Crystal Molybdenum with Depth-Resolved Synchrotron Microbeam Diffraction

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Microstructure and radiation stability of nano-dispersoids in particle-reinforced FeCrAl alloys with different Zr concentrations

Characterization of U–Nb–Zr dispersion fuel prepared by centrifugal atomization process

Proton irradiation-induced cracking and microstructural defects in UN and (U,Zr)N composite fuels

Pie of the 2 irradiation test (komo-2) for the atomized u- mo dispersion rod fuels at kaeri

Effects of U-Mo Irradiation Creep Coefficient on the Mesoscale Mechanical Behavior in U-Mo/Al Monolithic Fuel Plates

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Atomic simulations of primary irradiation damage in U-Mo-Xe system

The critical influencing factors responsible for the particle cracking in UMo/Zr dispersion fuel plates during post-irradiation anneal tests

Effects of U-Mo Irradiation Creep Performance on the Thermo-Mechanical Coupling Behavior in U-Mo/Al Monolithic Fuel Assemblies

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

He2+ Irradiation Response of Structural Evolution at Different Depths of MgO-Nd2(Zr1-xCex)2O7 Composite Ceramics Used for Inert Matrix Fuel

In situ TEM investigation of Xe ion irradiation induced defects and bubbles in pure molybdenum single crystal

Kr and Xe Irradiations in Lanthanum (la) Doped Ceria: Study at the High Dose Regime

Effect of Al addition on the mechanical property and irradiation resistance of NbMoZr-based medium-entropy alloys

MeV Per Nucleon Ion Irradiation of Nuclear Materials with High Energy Synchrotron X-ray Characterization