Abstract:In this study, the effect of Sc content on the microstructural characteristics and phase evolution of an Al–Cu–Li alloy under as-cast and homogenization conditions was investigated. The results show the grain refinement effect was distinct when the content of Sc was 0.16 wt%. However, further increased in Sc content resulted in a limited decrease in grain size. Besides, In the 0.16Sc alloy, the flocculent phase with primary Al 3 (Sc,Zr) phase coexisting with W (Al 8-x Cu 4+x Sc) phase appeared, and in the 0.32Sc alloy, the additional blocky primary Al 3 (Sc,Zr) phase was observed. With the increased of Sc content, the proportion of primary Al 3 (Sc,Zr) and W phases gradually increased, and the number and size of Al 2 Cu and Ag-containing Al 2 CuMg phases at grain boundaries gradually decreased. Two different morphologies of the primary W phase, flocculent and long strip shaped, were revealed within the Sc-containing alloy. The formation of the core-shell structure formed by Al 3 (Sc,Zr) particles and W phase was generated by the peritectic-eutectic reaction (Liquid + Al 3 (Sc,Zr)→α-Al + W) and the long strip of W phase was generated by the eutectic reaction (Liquid→α-Al + Al 2 Cu + W). During the homogenization process, the Al 2 Cu and Ag-containing Al 2 CuMg phases were completely re-dissolved after the two previous stages of homogenization, and only a small amount of the spheroidal residual W phase persisted. A subsequent low temperature treatment was employed to allow the Sc atoms that had diffused into the Al matrix to precipitate as Al 3 (Sc,Zr) dispersoids, resulting in a higher number density of Al 3 (Sc,Zr) particles for more efficiently utilizing the Sc elements.

Effect of Sc 2 O 3 particles on the microstructure and properties of tungsten alloy prepared by spark plasma sintering

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

Effect of Doped Lu2o3 on the Microstructures and Properties of Tungsten Alloy Prepared by Spark Plasma Sintering

Effect of tungsten micro-scale dispersed particles on the microstructure and mechanical properties of Ti–6Al–4V alloy

Influence of TiN nanoparticles on the microstructure and properties of W matrix materials prepared by spark plasma sintering

The Effect of Y2O3 Particles on the Microstructure and Mechanical Properties of Tungsten Fiber-Reinforced Tungsten Composites

Development of Tungsten-Based Materials by Different Sintering Techniques

EFFECT OF Sc ON MICROSTRUCTURE AND PROPERTIES OF Al-Li-Cu-Mg-Zr ALLOY

Ultrafine Grain Tungsten Heavy Alloys with Excellent Performance Prepared by Spark Plasma Sintering

Microstructure and Properties of W/Sm2O3 Composites Prepared Spark Plasma Sintering

Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc 2 O 3 composites

Microstructure and Properties of Tungsten–samarium Oxide Composite Prepared by a Novel Wet Chemical Method and Spark Plasma Sintering

Effect of Sc content on microstructure characteristics and evolution of W phase in Al–Cu–Li alloys under as-cast and homogenization conditions

The effects of SiC addition on the sintering densification, phases, microstructure and mechanical properties of W

Microstructural Evolution and Mechanical Properties of Spark Plasma Sintering of Tantalum-Tungsten Alloy

Microstructure and Mechanical Properties of W-Al2O3 Alloy Plates Prepared by a Wet Chemical Method and Rolling Process

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Effect of scandium on microstructure and mechanical properties of high zinc concentration aluminum alloys

Combined effect of SiC and carbon on sintering kinetics, microstructure and mechanical properties of fine-grained binderless tungsten carbide

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Study on Sc Microalloying and Strengthening Mechanism of Al-Mg Alloy