Abstract:The vacuum-blowing cleaning system, utilizing positive and negative pressure mixed-delivery theory, has been adopted for the road sweeper vehicle. To enhance the solid particle separation performance and to evaluate the motion characteristics of inhaled particles under different structural parameters, the gas-solid flow in the vacuum-blowing cleaning system was investigated by using computational fluid dynamics (CFD) technology. The influence of the main structural parameters on the grade dust collection efficiency and average detention time of the inhaled particles was determined, such as suction-inlet diameter, suction-inlet inclination angle, and front baffle inclination angle. And the interplay between them was also investigated. In addition, a dust collection efficiency model was built, based on uniform design (UD) and multiple regression analysis (MRA), and subsequently verified via experiments. The results revealed that the structural parameters have significant influence on the dust collection performance. The suction-inlet diameter, front baffle inclination angle, and suction-inlet inclination angle exerted the highest, second-highest, and lowest influence, respectively. Furthermore, the interaction among structural parameters also influenced the collection performance. The highest, second-highest, and lowest levels of influence were determined for the inlet diameter/baffle inclination angle, inlet inclination angle/baffle inclination angle, and inlet diameter/inlet inclination interactions, respectively. The highest dust collection efficiency (i.e., 96.10%) and a short average detention time of particles in the chamber were realized under the following conditions: suction-inlet diameter and inclination angle: 200 mm and 110°, respectively, and front baffle inclination angle: 105°.

Study of the Particle Separation Performance of a Dust-settling Hopper

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Numerical studies of the influence of particles' size distribution characteristics on the gravity separation performance of Liquid-solid Fluidized Bed Separator

Numerical Study on Particle Removal Performance of Pickup Head for a Street Vacuum Sweeper

Dust Suppression Analysis of a New Spiral Hopper Using CFD-DEM Simulations and Experiments

Enhancement of particle collection efficiency considering the structural interplay: particle motion characteristics analysis

Study on the key structure parameters of a gravity settling chamber based on a flow field simulation

Dust Collection's Efficiency of Low Reynolds Purifier via Computational Fluid Dynamic Simulation and Optimization

Hopper discharge of elongated particles of varying aspect ratio: Experiments and DEM simulations

Effect of inlet periodic velocity on the performance of standard cyclone separators

Computational Fluid Dynamics Analysis of Wet Dust Removal in High-Gravity Countercurrent Rotating Packed Bed

DEM Study on the Effects of Pellet Characteristics on Particle Flow in Rectangular Hopper

Study on the effects of a common liquid hopper on the separation efficiency of parallel hydrocyclones

Experimental Research on the Coupling and Settlement of Droplets and Dust Particles Influenced by Airflow

Numerical analysis of cyclone separators with unique Dipleg structures at different Dipleg-to-dustbin ratios

Numerical study of granular discharge flows through centred and off-centred rectangular hoppers using discrete element simulations

Experimental and Cpfd Numerical Study on Hopper Discharge

Prediction of Particle-Collection Efficiency for Vacuum-Blowing Cleaning System Based on Operational Conditions

Validation of a Eulerian-Lagrangian numerical algorithm for simulating ultra-coarse particles transported in horizontal and vertical hydraulic pipes

Numerical analysis on the influence of vortex motion in a reverse Stairmand cyclone separator by using LES model

Effects of the inlet particle spatial distribution on the performance of a gas-solid cyclone separator