Abstract:To navigate complex terrains, insects use diverse tarsal structures (adhesive pads, claws, spines) to reliably attach to and locomote across substrates. This includes surfaces of variable roughness and inclination, which often require reliable transitions from ambulatory to scansorial locomotion. Using bioinspired physical models as a means for comparative research, our study specifically focused on the diversity of tarsal spines, which facilitate locomotion via frictional engagement and shear force generation. For spine designs, we took inspiration from ground beetles (Family Carabidae), which is a largely terrestrial group known for their quick locomotion. Evaluating four different species, we found that the hind legs host linear rows of rigid spines along the entire tarsus. By taking morphometric measurements of the spines, we highlighted parameters of interest (e.g., spine angle and aspect ratio) in order to test their relationship to shear forces sustained during terrain interactions. We systematically evaluated these parameters using spines cut from stainless steel shim attached to a small acrylic sled loaded with various weights. The sled was placed on 3D-printed models of rough terrain, randomly generated using fractal Brownian motion, while a motorized pulley system applied force to the spines. A force sensor measured the reaction force on the terrain, recording shear force before failure occurred. Initial shear tests highlighted the importance of spine angle, with bioinspired anisotropic designs producing higher shear forces. Using this data, we placed the best (50○ angle) and worst (90○ angle) performing spines on the legs of our insect-scale ambulatory robot physical model. We then tested the robot on various surfaces at 0, 10 and 20○ inclines, seeing similar success with the more bioinspired spines.

A caterpillar climbing robot with spine claws and compliant structural modules

A Spiny Climbing Robot with Dual-Rail Mechanism

A Modular Cooperative Wall-Climbing Robot Based on Internal Soft Bone

Design, Modeling and Validation of a Deformable Capsule-Like Crawling Robot Based on Scissor Elements

Inhibition of ornithine decarboxylase induction by retinobenzoic acids in relation to their binding affinities to cellular retinoid-binding proteins

A Four-legged Wall-climbing Robot with Spines and Miniature Setae Array Inspired by Longicorn and Gecko

A Novel Worm-inspired Wall Climbing Robot with Sucker-microspine Composite Structure.

Enhancing the Vertical Mobility of a Robot Hexapod Using Microspines

Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain

Toward the Smooth Mesh Climbing of a Miniature Robot Using Bioinspired Soft and Expandable Claws

Development and Experimental Study of Multi-Motion Model Robot with Wheel-Track Compound Structure

A Spiny Claws Climbing Robot Based on Self-Sensing Soles

Design and motion planning of an autonomous climbing robot with claws

Design of an Active Flexible Spine for Wall Climbing Robot Using Pneumatic Soft Actuators

Advancing Legged Wall Climbing Robot Performance through Dynamic Contact-Integrated Climbing Model

A Novel Lockable Spring-loaded Prismatic Spine to Support Agile Quadrupedal Locomotion

Climbot: A Bio-Inspired Modular Biped Climbing Robot—System Development, Climbing Gaits, and Experiments

A flexible under-driven bionic climbing robot design

Design of Transverse Brachiation Robot and Motion Control System for Locomotion between Ledges at Different Elevations

A Modular Biped Wall-Climbing Robot With High Mobility and Manipulating Function

Modular crawling robots using soft pneumatic actuators