Abstract:To navigate complex terrains, insects use diverse tarsal structures (adhesive pads, claws, spines) to reliably attach to and locomote across substrates. This includes surfaces of variable roughness and inclination, which often require reliable transitions from ambulatory to scansorial locomotion. Using bioinspired physical models as a means for comparative research, our study specifically focused on the diversity of tarsal spines, which facilitate locomotion via frictional engagement and shear force generation. For spine designs, we took inspiration from ground beetles (Family Carabidae), which is a largely terrestrial group known for their quick locomotion. Evaluating four different species, we found that the hind legs host linear rows of rigid spines along the entire tarsus. By taking morphometric measurements of the spines, we highlighted parameters of interest (e.g., spine angle and aspect ratio) in order to test their relationship to shear forces sustained during terrain interactions. We systematically evaluated these parameters using spines cut from stainless steel shim attached to a small acrylic sled loaded with various weights. The sled was placed on 3D-printed models of rough terrain, randomly generated using fractal Brownian motion, while a motorized pulley system applied force to the spines. A force sensor measured the reaction force on the terrain, recording shear force before failure occurred. Initial shear tests highlighted the importance of spine angle, with bioinspired anisotropic designs producing higher shear forces. Using this data, we placed the best (50○ angle) and worst (90○ angle) performing spines on the legs of our insect-scale ambulatory robot physical model. We then tested the robot on various surfaces at 0, 10 and 20○ inclines, seeing similar success with the more bioinspired spines.

Enhancing the Vertical Mobility of a Robot Hexapod Using Microspines

RHex-T3: A Transformable Hexapod Robot with Ladder Climbing Function

A beetle-inspired miniature hexapod mesh climbing robot.

A Wheeled Wall-Climbing Robot with Bio-Inspired Spine Mechanisms

Gait optimization of step climbing for a hexapod robot

Design and Simulation of Special Hexapod Robot with Vertical Climbing Ability

A Step-Climbing Strategy of Hexapod Robot with Eccentric Wheel Legs

Spines and Inclines: Bioinspired Spines on an Insect-Scale Robot Facilitate Locomotion on Rough and Inclined Terrain

A Leg-Wheel Wall-Climbing Robot Utilizing Bio-Inspired Spine Feet

A Three-row Opposed Gripping Mechanism with Bioinspired Spiny Toes for Wall-climbing Robots

A caterpillar climbing robot with spine claws and compliant structural modules

Autonomous legged hill and stairwell ascent

Intelligent Rock-Climbing Robot Capable of Multimodal Locomotion and Hybrid Bioinspired Attachment

Inverted and Inclined Climbing Using Capillary Adhesion in a Quadrupedal Insect-Scale Robot

Toward the Smooth Mesh Climbing of a Miniature Robot Using Bioinspired Soft and Expandable Claws

Versatile Locomotion Skills for Hexapod Robots

Inchworm-inspired Soft Climbing Robot Using Microspine Arrays

SCALER: Versatile Multi-Limbed Robot for Free-Climbing in Extreme Terrains

Multirobot cliff climbing on low-gravity environments

Bio-inspired Attachment Mechanism of Dynastes Hercules: Vertical Climbing for On-Orbit Assembly Legged Robots