Abstract:Background Because the nonunion rate of conservative treatment was up to 1 5%, midshaft clavicle fractures with wedge-shaped fragments had been mainly treated with operation in recent years.Plate fixation was still one of the mainstream internal fixation methods,although a few scholars advocated various intramedullary fixations.For conventional plate and screw fixation techniques,one of the principles was to fix the free wedge-shaped fragments with lag screws as far as possible.We had ever improved the conventional techniques by intramedullary K-wire assistance in reduction,binding fragments with suture,and bridging plate fixation,which obtained good effects. But we found that the open reduction and bridging plate fixation increased the operation trauma because of the long incisions.We had made further improvement on this basis.From April 2011 to April 2014,26 patients of midshaft clavicular fracture with wedge-shaped fragments were treated by close reduction and MIPPO (minimal invasive percutaneous plate osteosynthesis)technique with three incisions.We performed this retrospective study to explore the operation methods and treatment effects of the midshaft clavicular fractures with wedge-shaped fragments using MIPPO technique.A group of 29 patients treated by conventional open reduction and internal fixation techniques,from March 2007 to November 2011,were also performed study as control group with complete follow-up data.Methods (1 )General information:All the cases were selected from the patients who were treated in our department from March 2007 to April 2014.Among them,26 patients were treated with three-incision MIPPO bridging technique,and 29 patients were treated with conventional open <br> reduction,lag screw fixation for fragments and neutralization or compression plate fixation.The mechanisms of injury were mainly fall damage.The two groups respectively had 2 cases of falling injury from height and 1 case with multiple fractures.According to Robinson classification,the fracture types were classified as follows:II B1 type was defined as the midshaft clavicular fracture with displacement and 1 wedged-shape fragment in the fracture site;IIB2 type was defined as the fracture with 2 or more free fragments in the facture site.The gender,age,dominant side,time from injury to operation and fracture type can be seen in table 1.(2)Operation methods:MIPPO group:Patients were on beach chair position under general anesthesia which had good muscular relaxation. The posterolateral side of the affected shoulder,upper arm and forearm were disinfected to guarantee that the surgeon can adequately move the shoulder during operation.The upward tilt tip of the proximal clavicular main fragment was obviously be palpated.A 2 cm incision was applied to expose the tip of the proximal fragments without periosteal dissection.A double-tip intramedullary K-wire with a diameter of 2 mm or 2.5 mm was inserted retrogradely into the medullary cavity of the proximal main fragment till the end of the K-wire was at the same level to the tip of the proximal fragment.The proximal tip of the K-wire pierced out of the skin in front of the proximal clavicle.The affected upper arm of the patient was elevated upward and tracted laterally by an assistant doctor in a way similar to the manipulative reduction to reduce the main fragment.At this point the operator could feel that the posterosuperior cortexes of both the distal and proximal main fragments were connected with palpation. Once the posterosuperior clavicular cortexes were matched, the intramedullary K-wire was inserted into the distal medullary cavity from the proximal medullary cavity till it pierced out of the clavicular posterior edge and was located at the posterior corner of acromion. Intraoperative fluoroscopy was conducted to confirm the reduction of the free fragments and the connection of the main fragments.The 10-hole anatomical locking plate (GE medical,US)was inserted percutaneously along the surface of the clavicle towards the proximal end through the middle incision.The proximal end of the plate was touched from the surface of the skin.A 2 cm incision was made on top of that to expose the proximal end of the plate.The plate was completely inserted to the proximal end till its distal end was located at the incision above the fracture site.Then the plate was moved towards the distal side along the surface of the clavicle until the fracture site was located right in the middle of the plate.The plate was touched at the distal end and then exposed with a 2 cm incision.After the plate was confirmed to be placed at the appropriate position,one locking screw was respectively driven in at both ends.Then other locking screws were inserted from lateral to middle at each of the distal and proximal ends.If the screw was obstructed,then the K-wire was pulled out gradually and the remaining screws were driven in.Three bicortical screws were inserted at each of the distal and proximal ends for fixation.The position of internal fixation was confirmed satisfactory under fluoroscopy.The incision was closed without the drainage tube.Conventional ORIF group:Cervical plexus block combined with brachial plexus block or general anesthesia was applied.The patient position was the same as that of the MIPPO group.The incision of clavicle surface was adopted to first expose the fracture site.The lag screw fixation was used between the larger free fragments and the main fragments to convert the clavicular shaft fracture with free fragments into simple fracture and then reduce it using Kocher clamp.The straight plate with 7-9 holes was fixed on the surface of clavicle after reduction and 3 screws were inserted respectively on each side.(3)Post-operative rehabilitation and follow-ups:The passive activities of the shoulder joint,mainly including external rotation and abduction,were initiated at the second day after surgery.The abduction angle is not more than 90°.Three sets of exercises respectively distributed in the morning,afternoon and evening were carried out every day with 10 times in each set while the affected limb was put in a sling for protection during the rest of the time.After 4 weeks,the sling was removed and the shoulder was allowed for simple daily life use, but the affected limb was limited to lift heavy obj ects and hyperabduct.1 2 weeks later,the affected limb was restored for complete work.The fracture healing of heavy manual workers should be confirmed by fluoroscopy. The X-ray examinations were <br> performed in the 4th,8th,12th,and 16th week.During follow-ups Constant Score System was applied to assess their shoulder functions and the complications were recorded.(4 ) Statistical methods:SPSS 19.0 software was used.The measurement data were indicated as means ± standard deviations.χ2 test and Fisher′s exact probability were performed in the comparison of the measurement data between two groups.If the measurement data of the two groups met the normal distribution,then the Independent-Sample t test was used for the comparison;otherwise, the Wilcoxon rank sum test was adopted;a p value less than 0.05 was considered as significant difference. Results After an average of 1 5 months (6~3 1 months)follow-ups,all the fractures in the MIPPO group obtained bony union.One case of nonunion occurred in the conventional ORIF group with plate breakage and loss of reduction.The patient underwent reoperation.The two groups had no significant difference in the failure rate.The operation time of the MIPPO group was 73.5 minutes in average with the mean intraoperative blood loss of 3 1 .9 ml.The MIPPO group was obviously better than the conventional ORIF group in the respects of operation time and blood loss.The time of fracture healing was 13.7 weeks in average and had no significant difference when compared to the conventional ORIF group.The Constant scores had no significant difference between two the groups either. Some patients in the two groups accepted second operation to remove implants although there was no complication.Two lean patients of the MIPPO group had obvious skin uplift and strongly urged the second surgeries of implants removal.Conclusions This study suggested that for the midshaft clavicle fractures with free wedged-shape fragments,the satisfactory functional reduction of free fragments can be obtained completely through close reduction.Compared to the conventional rigid internal fixation technique with lag screws for wedge-shaped fragments,it is unnecessary to pursuit anatomical reduction.MIPPO technique has the advantages of simple operation,small trauma and satisfactory treatment effects,reduces the operation time and increases the healing rate.

Abstract:Background The cases of distal clavicular fracture account for 12%-1 5% of all clavicular fracture cases.Distal clavicular fracture combined with coracoclavicular ligament rupture frequently behave as unstable fracture,with the opportunity for fracture non-union in conservative therapy being as high as 21%.Although partial patients with fracture nonunion show mild clinical symptoms,the symptomatic nonunion may affect the functions of shoulder joint.Therefore,most of physicians suggest operative treatment for unstable distal clavicular fracture.The operative treatment can achieve fracture union rate up to 98%.The distal clavicular fracture is characterized by fracture combined with ligament injury, and there are also diversified clinical therapies. The frequently reported internal fixation methods include kirschner wire,tension band,coraco-clavicular screw, anchor,clavicular hook plate,anatomical locking plate as well as suture fixation,etc.After fracture union,the metallic internal implants are frequently required to be taken out through operation. Different therapies have both their advantages and disadvantages.At present,there has been no unified therapy for unstable distal clavicular fracture.Arthroscopic button plate fixation therapy for unstable distal clavicular fracture is a relatively new minimally invasive treatment method,and its technology is originated from arthroscopic button plate fixation for the treatment of dislocation of acromioclavicular joint.We made retrospective analysis on the clinical effects of arthroscopic button plate fixation on distal clavicular fracture and discussed the potential advantages and disadvantages of this therapy.Method Ⅰ.General materials:Twenty-one patients with unstable distal clavicular fracture who received operative treatment in our department during the period from September 2010 to December 2012 are collected,seventeen cases of these meet inclusion criteria,namely 10 male cases and 7 female cases,with an average age of 42.6 years;according to Robinson clavicular fracture classification,all fracture cases are of type 3B fracture.Inclusion criteria:(1)Diagnosed as unstable distal clavicular fracture; (2 ) Received arthroscopic button plate fixation treatment. Exclusion criteria:(1)Diagnosed as unstable distal clavicular fracture,but has not received arthroscopic button plate fixation treatment,including open reduction Clavicle hook plate fixation,anatomic locking plate fixation and open button plate fixation;(2 )Old distal clavicular fracture.Ⅱ.Operative method:operation was performed under general anesthesia.Allow the patient to take sand beach chair posture, with head leaning to the other side.Draw shoulder joint anatomic marks under shoulder arthroscopy, and perform conventional disinfection on affected shoulder and upper limbs.The arthroscope enters the joint cavity from posterior portal;Under direct vision,establish the anterior working portal located in rotator interval. perform intra-articular routine inspection, pay particular attention to inspect whether there is structural damage to glenoid labrum and rotator cuff.If intra-articular injury is discovered during operation,immerely treat it.Under direct vision,establish the anterolateral second observation portal under arthroscope through anterior supraspinatus tendon,and transfer the arthroscope to the second observation portal through exchange rod.Along the upper edge of musculus subscapularis,inward expose the lower surface of coracoid,and use a feller to determine the madial and lateral edges of coracoid.Perform C-arm X-ray machine fluoroscopy to demine the vertical projection position of coracoid on clavicular surface,namely the conical ligament attachment position;open skin by 2 cm,and expose the clavicular upper surface.Place the anterior cruciate ligament guider on the central location of coracoid lower surface,drive guide pin into coracoid through clavicle;perform fluoroscopy to validate that the position of guide pin is corret;through guide pin,use a 4.5 mm hollow drill for drilling,introduce the shuttle wire,and take out guider.Take two 4-hole button plates,remove loop spinalium,and use two No.5 Ethicon suture to perform plate connection as shown in Figure 9.By means of shuttle wire,introduce the button plates to pass through clavicle and coracoid,place one plate under coracoid,place another plate on the surface of clavicle.Perform reduction of fracture.If there are soft tissues entrapped at the fracture end,use probe for release. Maintain fracture reduction,tighten the suture for knotting and fixation,perform fluoroscopy again to validate fracture reduction;perform arthroscopy to validate that the plate under coracoid is completely attached on the lower surface of coracoid.Conventionally close incision.Ⅲ.Postoperative treatment:Use shoulder joint protector to suspend the injured shoulder for 4 weeks.In 4 weeks post operation, allow the shoulder joint to perform passive uplifting and external rotation activities;In the 2nd month after operation,perform intensive joint traction exercise,active assisted shoulder joint uplifting as well as internal and external rotation activities;2 months post operation,when preliminary fracture healing is realized and there is no local pressing pain,start active motion of shoulder joint,gradually recover daily activities as well as muscle strength and endurance training on rotator cuff and shoulder girdle.Ⅳ.Post-operative follow-up:After operation,perform re-examination once per month,take X-ray film,examine the fracture union situation until bony union of fracture.In the final follow-up,make evaluation on patient through shoulder joint constant scoring,simple shoulder joint test (SST),VAS pain scoring and examination on the range of shoulder joint motion.Results All 1 7 cases obtained follow-up,with average follow-up time of 50 months (42-66 months).1 6 cases achieved fracture union,with average union time of 3.2 months;there is 1 case of nonunion.During the operation 2 cases of combined intra-articular injury,1 case of SLAP injury and 1 case of Bankart injury are discovered and respectively repaired.Average postoperative constant score of the patients is 93.1 points (72-100 points),with health side score of 98.3 points (90-100 points).SST affected side score is 10.7 points on average (8-12 points),with health side score of 1 1.6 points (9-12 points).VAS average score is 1.9 points (0-4 points),with health side score of 1.7 points (0-5 points).1 case of fracture nonunion,male,aged 50 at the time of initial operation,right shoulder is injured by falling from electric bicycle in drunk driving,fracture typing is 3B distal clavicle fracture;this patient has pervious history of diabetes,with unsatisfactory blood glucose control.After hospital admission, perform arthroscopic internal fixation with button plate,and postoperative conventional bracing and rehabilitation training;According to postoperative re-examination,internal fixation failure and fracture displacement are discovered;make observation until 4 months after operation;fracture nonunion, local pressing pain and obviously limited shoulder joint functions are discovered.After readmission of the patients,take out the internal implants,take ilium for bone grafting,perform internal fixation with clavicular hook-plate;In 3 months after the operation for the second time,fracture union is realized;12 months later,take out clavicular hook-plate;the shoulder joint functions of the patients are basically recovered to normal level,with Constant score of 91 points,SST score of 1 1 points and VAS score of 1 point.Conclusion Most of unstable distal clavicular fracture cases need operative treatment,but there has been no unified therapy at present.Arthroscope-assisted button plate fixation is a new operation method which has been gradually developing in recent years,which is minimally invasive,being able to treat combined intra-articular injury at the same time,realize elastic fixation of coracoclavicular,without need for reoperation.This new operation method can realize good clinical effects,but has high technical requirements.It can be an option for treatment of distal clavicular fracture.

Minimally Invasive Plate Osteosynthesis for Midshaft Clavicular Fractures Using Superior Anatomic Plating

[Effectiveness of minimally invasive internal fixation with locking plates for mid-shaft clavicle fractures]

Improved anterolateral approach to treatment of terminal femoral fractures

Using Suture and Locking Anatomical Bridging Plate to Fix Comminuted Mid-Shaft Clavicle Fractures with Intramedullary Nail Assistance in Reduction.

A novel surgical method for treating medial-end clavicle fractures

[Novel Sternoclavicular Hook-Plate for Treatment of Proximal Clavicle Fracture with Dislocation of Sternoclavicular Joint].

Synergistic versus antagonistic actions of glutamate and glutathione: the role of excitotoxicity and oxidative stress in neuronal disease.

A novel surgical method for treating fractures of the middle third of the clavicle

Operative Versus Nonoperative Treatment in the Management of Midshaft Clavicular Fractures: a Meta-Analysis of Randomized Controlled Trials

Precontoured Locking Compression Plate with Titanium Alloy Cable System: In Treatment of Neer Type IIb Distal Clavicle Fracture

Plating Versus Intramedullary Fixation For Acute Displaced Mid-Shaft Clavicle Fractures: A Meta-Analysis

PERPENDICULAR DOUBLE-PLATE FIXATION WITH LOCKING SYSTEM FOR ACROMION PEDICLE FRACTURE

Treatment of bipolar clavicle injury with internal plating: a case series and literature review

[Treatment of Comminuted Clavicle Shaft Fractures with Provisional Intra-Medullary K-wire Fixation and Bridging Plate Internal Fixation].

Applying MIPPO technique to treat clavicle shaft fractures with wedge fracture fragment

Arthroscopic button plate fixation therapy for instable distal clavicular fracture

Metabolic changes in the arterial wall and endothelial injury in experimental methioninaemia.

Clinical Comparison of Two Types of Clavicular Hook Plates

Multicenter, Prospective, Observational Trial of Nonoperative Versus Operative Treatment for High-Energy Midshaft Clavicle Fractures

Minimally Invasive Plate Osteosynthesis in the Treatment of Complex Humeral Shaft Fractures

Orthogonal low profile double-plate osteosynthesis for treatment of Neer type II B distal clavicle fractures