Abstract:The effect of Sn content on the corrosion resistance of a new type of lath martensitic low alloy ultra-high strength steel obtained by quenching and low temperature tempering in marine environment was studied by using 3.5%NaCl solution immersion test to simulate marine environment. The microstructure，mechanical properties and corrosion behavior of the two steels were studied by SEM，XRD，XPS，EPMA，electronic universal testing machine and pendulum impact testing machine. The evolution of the rust layer，phase composition and element distribution of test steel were analyzed. The result shows that the microstructure of two test steels with different Sn content after heat treatment is lath martensite. Meanwhile their comprehensive mechanical properties are excellent. Loose and easy-falling yellow-brown rust layer （NAR） of 0.042Sn test steel is formed on the surface during the immersion corrosion process. Due to the increase of Sn content in 0.2Sn test steel，brownish-black adhesive rust layer （AR） is gradually formed，which is attached to the surface of the substrate and close to the base. The rust layer of test steel presents an internal and external two-layer structure with the increase of corrosion time. The thickness of inner rust layer of 0.2Sn test steel gradually increases，which can effectively prevent corrosive ions from damaging the substrate. Fe，O and Cr are main elements of the rust layer at the initial stage of corrosion. Cr and Sn，the corrosion resistant elements，are enriched in layers in the inner rust layer at the middle and later stages of corrosion，which promotes the conversion of γ-FeOOH to α-FeOOH. The stable SnO 2 oxidation products in the rust layer are highly protective，making the rust layer dense and uniform. FeCr 2 O 4 and Cr（OH） 3 block the penetration of Cl - and act as cation selective phase in the rust layer，thus improving the corrosion resistance of low alloy ultra-high strength steel.

Effect of Tin on the Corrosion Behavior of Sea-Water Corrosion-Resisting Steel

Effect of Tin Addition on Corrosion Behavior of a Low-Alloy Steel in Simulated Costal-Industrial Atmosphere

Effect of Tin on the Corrosion Resistance of 16 Cr Ferritic Stainless Steel in Acidic Solution and Chloride-Containing Media

Effect of Tin on Corrosion Resistance and Formability of Tin Bearing Ferritic Stainless Steel

Investigation of Corrosion Resistance Property and Passivation Film Structure of Tin Containing Stainless Steel

Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel

Effect of Alloying Tin on the Corrosion Characteristics of Austenitic Stainless Steel in Sulfuric Acid and Sodium Chloride Solutions

Effects of reflowing parameters and steel substrate on properties tin–iron alloy layer on surface of tinplate

Effect of tin sludge in plating bath on surface state of tin-plated steel

Influence of tin on properties and corrosion behavior of Q125 grade tube used in deep well

Effect of Sn on corrosion behavior of low-alloy high-strength steel in marine environment

In-situ Study the Corrosion Degradation Mechanism of Tinplate in Salty Water by Scanning Electrochemical Microscopy

Effect of Ultrasonic Cleaning after Passivation on Corrosion Resistance of Tin Coating

Effect of Manganese Sulfide on the Precipitation Behavior of Tin in Steel

Inhibition Effect and Mechanism of Tin on the Active Dissolution of Tin-Containing 430LX Ferritic Stainless Steel

Effect of Tin Addition on the Properties of Electroless Ni-P-Sn Ternary Deposits

Influence of Tensile Strain on the Corrosion Behavior of Tinplate in 0.1 Mol/l NaCl Solution

Study on Surface Corrosion Behavior of Tin Free Steel Product

Effect of Tannic Acid on Corrosion Behavior of Carbon Steel in NaCl Solution

Effect of surface state of tin free steel on its finishing performance

Effect of Cu on the Corrosion Resistance of the Carbon Steel