Abstract:Abstract Finding the optimum balance between strength and toughness, as well as acquiring reliable thermal shock resistance and oxidation resistance, has always been the most concerned topic in the discussion of ultra-high temperature ceramic composites. Herein, PyC modified 3D carbon fiber is used to reinforce ultra-high temperature ceramic (UHTC). The macroscopic block composite with large size is successfully fabricated through low temperature sintering at 1300 °C without pressure. The prepared PyC modified 3D C f /ZrC-SiC composites simultaneously possess excellent physical and chemical stability under the synergistic effect of PyC interface layer and low temperature sintering without pressure. The fracture toughness is increased in magnitude to 13.05 ± 1.72 MPa·m 1/2 accompanied by reliable flexural strength of 251 ± 27 MPa. After rapid thermal shock spanning from room temperature (RT) to 1200 °C, there are no visible surface penetrating cracks, spalling, or structural fragmentation. The maximum critical temperature difference reaches 875 °C, which is nearly three times higher than that of traditional monolithic ceramics. The haunting puzzle of intrinsic brittleness and low damage tolerance are resolved fundamentally. Under the protection of PyC interface layer, the carbon fibers around oxide layer and matrix remain structure intact after static oxidation at 1500 °C for 30 min. The oxide layer has reliable physical and chemical stability and resists the erosion from fierce oxidizing atmosphere, ensuring the excellent oxidation resistance of the composites. In a sense, the present work provides promising universality in designability and achievement of 3D carbon fiber reinforced ceramic composites.

A Lightweight, High Compression Strength Ultra High Temperature Ceramic Corrugated Panel with Potential for Thermal Protection System Applications

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

Using PyC modified 3D carbon fiber to reinforce UHTC under low temperature sintering without pressure

An Overview of Ultra-High Temperature Ceramic for Thermal Insulation: Structure and Composition Design with Thermal Conductivity Regulation

Fabrication and Mechanical Properties of Lightweight Zro2 Ceramic Corrugated Core Sandwich Panels

Preparation and properties of zirconium diboride-based ultra-high temperature ceramics

Fabrication process and mechanical properties of C/SiC corrugated core sandwich panel

Progress in preparation and ablation resistance of ultra-high-temperature ceramics modified C/C composites for extreme environment

Microstructure, mechanical properties, and reinforcement mechanism of carbide toughened ZrC-based ultra-high temperature ceramics: A review

Heat Transfer Mechanism of the C/SiC Ceramics Pyramidal Lattice Composites

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics

Ultrastrong and High Thermal Insulating Porous High‐Entropy Ceramics up to 2000°C

Advances in ultra-high temperature ceramics, composites, and coatings

Porous high-entropy (Zr0.25Hf0.25Nb0.25Ti0.25)C with high strength and uniform pore structure fabricated by freeze-casting

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

High temperature ceramic thermal insulation material

Experimental and numerical research on high‐temperature thermal insulation performance of lightweight porous ceramic/nanomaterial composite structure

Ultra-high temperature ceramic composite

Engineering Cf /ZrB2 -SiC-Y2 O3 for Thermal Structures of Hypersonic Vehicles with Excellent Long-Term Ultrahigh Temperature Ablation Resistance

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review