Abstract:The application of Ti6Al 4V in lightweight structures subjected to impact loads necessitates a comprehensive understanding of its dynamic response under high strain rates to ensure the safety and reliability of these components. In this paper, the macroscopic compressive mechanical behavior of Ti 6Al 4V under high strain rates was investigated through the split-Hopkinson pressure bar (SHPB) technique at both room temperature and 200 °C, followed by microstructure analysis of the compressed specimens, carried out employing a combination of optical microscopy (OM) and electron backscatter diffraction (EBSD), and elastic modulus and hardness measurements, performed by a nanoindentation instrument. At room temperature, both the modulus and strain hardening exponent of Ti 6Al4V exhibited an initial increase before the strain rate reached 1000 s -1 , after which they decreased at 3400 s -1 . Meanwhile, the flow stress continued to rise with increasing strain rate. Microscopic observations revealed that twinning played a substantial role in the strain hardening effects. Notably, the basal slip system of the hcp (hexagonal close packed) α phase did not display a more favorable trend, while the c+a type slip systems became more active. Under a strain rate of 5000 s -1 , discontinuous dynamic recrystallization emerged as the dominant mechanism, resulting in an increased frequency of low-angle grain boundaries, as well as a reduction in grain size and dislocation density. These results provide a basis for explaining the mechanical behavior of Ti 6Al 4V under high strain rates and offer insights for the establishment of material models that take into account microstructure deformation mechanisms.

Effect of strain rate on the tension–compression asymmetric responses of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si

Tension behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si alloy over a wide range of strain rates

Effect of Strain Rate on the Tension Behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si Alloy at Low Temperatures

Strain Rate Sensitivity of Tensile Properties in Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy: Experiments and Constitutive Modeling

The Constitutive Responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates and Elevated Temperatures

Strain-Rate-Dependent Tensile Response of Ti–5Al–2.5Sn Alloy

Temperature-Dependent Tension Plastic Deformation and Fracture Behavior of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates

Dynamic Strain-Rate Effect On Uniaxial Tension Deformation Of Ti5al2.5sn Alpha-Titanium Alloy At Various Temperatures

Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy

Strain rate sensitivity of titanium matrix composites: In the presence of laminated structure

The effect of strain rate on deformation-induced α′ phase transformation and mechanical properties of a metastable β-type Ti–30Zr–5Mo alloy

Influence of strain rate on the compressive behavior of heterogeneous Cu/Ta multilayer: A molecular dynamics simulation study

Effects of temperature and strain rate on the tension-compression asymmetric plastic deformation behavior of ME20M magnesium alloy: Experiments and modeling

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Effect of strain rate on microstructure and mechanical properties of spray-formed Al–Cu–Mg alloy

The Effects of Strain Rate and Anisotropy on the Formability and Mechanical Behaviour of Aluminium Alloy 2024-T3

Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

Tensile Behavior of Ti-5Al-2.5Sn Alloy at Low Temperatures and High Strain Rates

Strain Rate Effect on the Out-of-plane Dynamic Compressive Behavior of Metallic Honeycombs: Experiment and Theory

Influence of nanoparticles on the compressive rate-sensitivity of magnesium alloys

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions