Abstract:Combining the electromagnetic levitation (EML) method with materials processing techniques (pressure die-casting and copper mold solidification), bulk Ti44Al48Nb8 alloy samples with different shapes were prepared, and their microstructure evolution, tensile properties and deformation behavior were systematically investigated. Assisted with a double aberration corrected transmission electron microscope (TEM) and molecular dynamics (MD) simulation, three types of intersecting nanotwins were observed and the formation mechanism of step-like and intersecting nanotwins under both tensile loading and at highly undercooled state were discussed. For the 35 g cone-shaped Ti44Al48Nb8 sample by EML, the microstructure consists of lamellar alpha 2Ti3Al+gamma-TiAl matrix, Nb-rich and Al-rich region, showing a typical peritectic morphology. The average grain size has been significantly reduced after levitation die-casting and copper mold casting, due to the relatively high cooling rate and external stress. The rapidly solidified microstructure of a 0.6 g sample undercooled at 61 K has the similar microstructure with large samples. With the increase of bulk undercooling at 300 K, elemental segregation has been effectively inhibited and the intersecting nanotwins were formed, which shows a unique hierarchical structure. The samples processed by copper-mold casting have good tensile properties, which can be attributed to the refined microstructure, the generation of dislocation and stacking faults, and the formation of intersecting nanotwins. Based on the results of MD simulation and atomic-scale quasi-in-situ TEM observation, the analogous dissociation of dislocation dominated by pole mechanism occurs, resulting in the formation of 1/6 < 112 > Shockley partial dislocation, 1/ 6 < 110 > stair-rod dislocation and 1/3 < 111 > Frank partial dislocation. When samples were highly undercooled, the generated internal stress can facilitate twinning at a much lower stress level, which can be beneficial for the formation of nanotwins at undercooled state.

Twinning in Cryomilled Nanocrystalline Mg Powder

Deformation Twins Formed in Nanocrystalline Materials

Atomic-scale Structural Characterization and Twin Formation Mechanisms of Μ Phase Within Refractory NbNi Alloy

Grain Size Dependence of Twin Nucleation in Magnesium Alloys

The Influence of Lamellar Twins on Deformation Mechanism in Nanocrystalline Magnesium under Uniaxial Compression

Enhanced Tensile Properties and Intersecting Nanotwins Formation Mechanism of Ti44Al48Nb8 Alloy Via Electromagnetic Levitation Processing

Deformation Twinning In Nanocrystalline Aluminum

Tuning Generalized Planar Fault Energies to Enable Deformation Twinning in Nanocrystalline Aluminum Alloys

Atomic Motion in Mg–3Al–1Zn During Twinning Deformation

Application of machine learning to assess the influence of microstructure on twin nucleation in Mg alloys

Investigation of nanotwins in the bimodal-structured Fe22Co22Ni20Cr22Mn14 alloy subjected to high-strain-rate deformation at cryogenic temperatures

The nanostructured origin of deformation twinning.

Atomic Simulation Study on the Effect of Nanotwin on the Compression Behavior of Mg–Y Alloys

Twin recrystallization mechanisms in a high strain rate compressed Mg-Zn alloy

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

The effects of microstructure on deformation twinning in Mg WE43

Twinning Behaviour in the Intermetallic Compound Al 18 Cr 2 Mg 3

Twin-twin Geometric Structure Effect on the Twinning Behavior of an Mg-4Y-3Nd-2Sm-0.5Zr Alloy Traced by Quasi-in-situ EBSD

Understanding the Interaction of {10–12} Twins and Mg17Al12 Precipitates in Magnesium Alloys Via High-Resolution Electron Microscopy

Deformation Twinning Characteristic of Mechanically Alloyed Cu-Nb Alloy Powders

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling