Abstract:Siloxanes are widely used in different applications: health care, dry cleaning, household products, paints and coatings, paper, personal care, for example. This explains their prevalence in the environment. Because of their volatile nature, most of the time they are dispersed in the atmosphere, but they can also be present in the slurry from landfills. During anaerobic digestion, when the temperature goes up to 60 degrees C, siloxanes are volatilized, forming part of the biogas. Operational problems using biogas to produce energy, heat and hydrogen have been identified. At high temperatures the siloxanes are transformed into silicate dioxide (commonly called sand transmission). These white deposits may adhere to metal or catalytic substrate surfaces, seriously reducing equipment efficiency, and this can be a reason for changing equipment warranties. Consequently, elimination of siloxanes has become very important. Unfortunately, relatively little information can be found on this subject. Nevertheless some authors have described different analytical methods for siloxane quantification, and recent studies have looked at the presence of siloxanes in landfills and the restriction on the energy recovery equipment using the biogas produced. The growing consumption of siloxanes and silicones in industrial processes consequently increase their prevalence in the environment, hampering the use of biogas as a source of 'green energy'. Therefore, the principal focus of this study is the treatment of siloxanes. Their elimination was carried out using an adsorption process with four different porous materials: activated carbon cloths (ACC), granular activated carbon (GAC), zeolite and silica gel. Two representative siloxane compounds were used in this study, hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4). Adsorption kinetics and isotherms in batch reactors were performed. It was observed that the mass transfer into the porous material was more rapid for the activated carbon than for the zeolite and silica gel, congruent with the porous structure of the material. Moreover, it was found that D4 is more adsorbable than L2, due to possible interactions between the solid surface and the physical structure of the cyclic compound (D4). The influence of humidity and temperature were also studied. The increase in the temperature reduced the adsorption capacities. The influence of humidity on the adsorption was investigated under dry air and humid air at 70%. No significant difference in the adsorption capacities was found for the activated carbon and for the zeolite, but for the silica gel the mass transfer decreased considerably. For the adsorption isotherms, the maximal capacity of elimination was obtained with the activated carbon materials and was directly related to the porous structure. Thus activated carbon cloth was chosen to design the adsorption-desorption processes in a dynamic system. Thermal heating was used to achieve the regeneration process. Initial cycles have been accomplished and show the stability of the process.

Siloxane D4 adsorption by mesoporous aluminosilicates

Continuous Synthesis of Mesoporous Y Zeolites from Normal Inorganic Aluminosilicates and Their High Adsorption Capacity for Dibenzothiophene (DBT) and 4,6-Dimethyldibenzothiophene (4,6-DMDBT)

Modified Inverse Micelle Synthesis for Mesoporous Alumina with a High D4 Siloxane Adsorption Capacity

Modified Mesoporous Silica For Efficient Siloxane Capture

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Copper Oxide Modified Activated Carbon for Enhanced Adsorption Performance of Siloxane: an Experimental and DFT Study

Synthesis and properties of mesoporous molecular sieve MCM-41 from extreme dense system with auxiliary alkanes

Adsorptive Separation of Methylalumoxane by Mesoporous Molecular Sieve MCM-41

Alumination and Ion Exchange of Mesoporous SBA-15 Molecular Sieves

Adsorption of n-heptane, toluene and o-xylene on mesoporous UL-ZSM5 materials

Synergistic adsorption of As(V) from aqueous solution onto mesoporous silica decorated orderly with Al2O3 and Fe2O3 nanoparticles

Facile Preparation of Hierarchically Porous Diatomite/mfi-Type Zeolite Composites and Their Performance of Benzene Adsorption: the Effects of NaOH Etching Pretreatment.

Synthesis of Microporous Silica in the Presence of Dodecyldimethylbenzylammonium Chloride Surfactant

Synthesis of Core-shell ZSM-5@ Ordered Mesoporous Silica by Tetradecylamine Surfactant

Preparation of High Performance Adsorbents by Functionalizing Mesostructured Silica Spheres for Selective Adsorption of Organosulfur Compounds

Adsorptive desulfurization of diesel with mesoporous aluminosilicates

Surface Modification of Activated Carbon for Siloxane Adsorption

Synthesis and properties of aluminosilicate mesoporous material with adjustable pore structure

Siloxane treatment by adsorption into porous materials

Rational design of silicas with meso-macroporosity as supports for high-performance solid amine CO2 adsorbents

Synthesis, Characterization, and Catalytic Properties of Stable Mesoporous Aluminosilicates Assembled from Preformed Zeolite L Precursors