Abstract:On-chip free spectral range (FSR)-free optical filter with a compact footprint is crucial for developing emerging sensing applications, as it allows for the optimal utilization of extensive optical bandwidth. Despite being an important area of technology, on-chip optical sensing system has faced challenges in channel count, particularly due to the limited FSR, large footprint, and loss of the wavelength-selective filter unit. To address these challenges, a scalable nanobeam cavity prototype with a length of approximate to 21 mu m based on the asymmetric Bragg mirrors is presented. By engineering the band structure of the nanobeam cavity, the stopband can be flexibly tuned to achieve an FSR-free spectral response within 350 nm. Two 25-nanobeam-cavity arrays are fabricated with a footprint of 215 x 120 mu m2 and an average insertion loss of approximate to 3.2 dB over a broad wavelength range. To the best of the authors' knowledge, this is the largest-channel-count multiplexed micro-cavity array on a single waveguide, reported to date. As a proof-of-principle application, the 2D high-spatial-resolution temperature distribution sensing is experimentally demonstrated. This work provides new insight into the design of ultra-compact FSR-free filters and will give birth to numerous charming applications that make use of the broad bandwidth capabilities of optics while occupying minimal space. A scalable nanobeam cavity prototype is proposed, which overcomes the limitation of free spectral range (FSR) by engineering the band structure of the nanobeam cavity using asymmetric Bragg mirrors. In this prototype, 25 basic units are successfully cascaded in series, forming a 5 x 5 compact sensing matrix. The proof-of-principle application of 2D high-spatial-resolution temperature distribution sensing is experimentally demonstrated.image

Multi-physics Simulation and Fabrication of a Compact 128 × 128 Micro-Electro-mechanical System Fabry-Perot Cavity Tunable Filter Array for Infrared Hyperspectral Imager.

Fabry-Perot Multilayer for Spectral Imaging Applications

Modeling and Simulation of Electromodulation Imaging Spectrum Based on a MEMS-FP Array with a High Filling-Factor

Design and Simulation of Electrically Addressed Infrared Filtering Chip Based on Cascaded Liquid-Crystal Fabry-Perot Effect for Integration Application of Infrared Spectral Imaging Sensor Array

Free-spectral-range-free Filters with Ultrawide Tunability Across the S + C + L Band

High‐Resolution 2D Quasi‐Distributed Optical Sensing with On‐Chip Multiplexed FSR‐Free Nanobeam Cavity Array

Grayscale-patterned integrated multilayer-metal-dielectric microcavities for on-chip multi/hyperspectral imaging in the extended visible bandwidth

Design and fabrication of a metallic irregular F-P filter array for a miniature spectrometer.

Design and Fabrication of an Integrated Dual-Channel Thin-Film Filter for the Mid-Infrared

Imaging of the Mid-Infrared Focal Plane Array with a Modified Read-Out Circuit.

The Simulation on the Microelectromechanical Tunable F-P Optical Filter

Design and fabrication of visible/mid-infrared dual-band microfilter array

A Novel Arc-Cantilevers F-P Filter with Low Stress Applicated in Infrared Spectral Integrated Photodetector Chip

Uncooled Infrared Imaging Device Based on Optimized Optomechanical Micro-Cantilever Array

Simulation Of Hyperspectral Imaging Based On Tunable Fabry-Perot Interferometer

Patterning of Visible/Infrared Dual-Band Microstrip Filter Arrays for Multispectral Imaging Application

Ultrabroadband, high color purity multispectral color filter arrays

Wide Color Gamut and Multi‐Band Color Filtration With MIM Structure Plasmonic Filters

Design and fabrication of large-area tunable MOEMS-based shortwave infrared Fabry-Pérot filters

An Arrayed Liquid Crystal Fabry–Perot Infrared Filter for Electrically Tunable Spectral Imaging Detection