Abstract:Composite columns of concrete-filled steel tubes (CFSTs) are very efficient in providing large structural resistances and rigidities. However, high strength S690 steel tubes are not covered in current design codes. Therefore, a series of experimental investigations into stocky composite columns with circular CFSTs under compression were conducted. A total of 21 stocky composite columns with different tube diameters and thicknesses made of Grades S355, S460 and S690 steel and Grade C60/75 concrete were tested under different loading conditions. Moreover, extensive measurements on the surface strains of the steel tubes were made during tests. Data analyses on the test results reveal that all composite columns exhibit enhanced section resistances and ductility at large deformations, indicating that the use of S690 steel and C60/75 concrete in these composite columns are highly efficient. A simple method for determining confining pressures provided by the steel tubes to the concrete cores in these composite columns is proposed, which involves a systematic analysis on the measured data and the use of von Mises yielding criterion without any complicated plasticity formulation. Based on the proposed method, the resistance contributions of both the steel tubes and the concrete cores are successfully quantified. Comparison between the measured and the predicted resistances using EN 1994–1-1 of these composite columns reveals that while the section resistances of these composite columns are safely predicted, the resistances of the steel tubes are underpredicted while those of the concrete cores are overpredicted correspondingly. The findings highlight the need to improve the predictability of the current design rules, and to give increased resistances of the steel tubes when high strength S690 steel tubes are used.

Analysis on Composite Action of Concrete-Filled Steel Tube Columns Reinforced by Different Confining Materials

Confined Concrete-Filled Tubular Columns

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Study on Behaviors of FRP Confined Stub Concrete Filled Square Steel Tubes under Axial Load

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Experimental Study and Theoretical Analyses on Compressive Bearing Capacity of High Strength Concrete-Filled Steel Tube Composite Columns

Numerical analysis of high strength concrete filled steel tube composite columns under centric axial compressive loading

Combined Axial and Flexural Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

ANALYSES ON COMPOSITE COLUMN WITH INSIDE CONCRETE FILLED STEEL TUBE UNDER AXIAL COMPRESSION

Experimental study on axial compressive strength of concrete filled composite steel tube short columns

Numerical Study on the Axial Compressive Behavior of Steel-Tube-Confined Concrete-Filled Steel Tubes

Analysis Of Frp-Strengthened Concrete-Filled Steel Tubular Columns Under Axial Compression

Experimental investigations into stocky composite columns of concrete-filled circular S690 steel tubes under compression

An Experiment Study of Axial Compressive Strength of Concrete Filled Steel Tube Composite Columns

Study on Axial Compression Properties of a New Type of Fiber-Reinforced Square Concrete-Filled Steel-Tube Composite Column

Bearing Capacity of Axially Compressed Core Columns Having Concrete-Filled Steel Tubes

Experimental Behaviour of Concrete-Filled Stiffened Thin-Walled Steel Tubular Columns

Experimental Research and Numerical Analysis on the Concrete-Filled Square CFRP Steel Tube Column Under Compressive-Shear Loading

Overview of the Current Research Status of Concrete-Filled Steel Tube