Abstract:Superplasticizers, polyacrylate latexes and asphalt emulsions were employed to investigate the influences of chemical admixtures with different sizes on the pore structure and impermeability of hardened cement pastes. With different admixture types and contents, pore structure and impermeability of specimens cured for 28 days were tested by mercury intrusion porosimetry and alternating current impedance, respectively. Scanning electron microscopy was also used to observe the microstructure of fresh and hardened pastes. The results show that, porosity, average pore size and inkbottle pores volume in the hardened cement pastes as well as permeability presented slight decrease with the increase in the content of superplasticizers. For the specimens with low latex content, the pore size in the hardened cement paste remained unchanged, or was coarsened, and the compactness and impermeability declined; for those with high latex content, the pore size was refined and compactness and impermeability were enhanced. Both of the compactness and impermeability increased with the increase in asphalt emulsion content. At the same content, the latex Ll, having smaller particle size was more effective than latex L2 and, the anionic asphalt emulsion was more effective than cationic asphalt emulsion on improving pore structure and impermeability, respectively. It was accepted that chemical admixtures were able to improve the flowability of fresh paste by enhancing the dispersion of cement grains, further the effects were extended to affect the pore structure and impermeability of hardened one. Meanwhile, the polymer was also effective to compact the interfacial zone between phases by filling up the pore space, which would lead to more compact structure of hardened paste. For the same type of chemical admixture at low content, the pore structure and impermeability were mainly influenced by the dispersion of cement grains, while at high content, the filling effect become dominant. For different types of chemical admixtures with the same filling effect, the better dispersion of cement grains would result in finer pore structure and higher impermeability.

Effect of Main Compositions of Anti-Washout Admixture on Paste

Effect of super water absorbing polymer based anti-washout admixtures on the properties of seawater-mixed cement paste

Influence of Superplasticizers on Early Age Drying Shrinkage of Cement Paste with the Same Consistency

Enhancing anti-washout behavior of cement paste by polyacrylamide gelation: From floc properties to mechanism

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Comparative Study of the Performance of Underwater Concrete between Anionic and Nonionic Anti-Washout Admixtures

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Effect of Composition on the Performance and Microstructures of Mining High- Water Solidified Materials

Influence of Soluble Alkali on the Compatibility of Cement and Aminosulphonate Based Superplasticizer

Washout resistance of high-performance underwater concrete

Effect of Functional Superplasticizers on Concrete Strength and Pore Structure

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar

Study on the Effect of Additives on the Performance of Cement-Based Composite Anti-Corrosion Coatings for Steel Bars in Prefabricated Construction

Effect of anti-washout admixture on the compressive strength of alkali-activated underwater non-dispersible concrete

Study on testing methods for water resistance of underwater cement paste

Effect of Polycarboxylate-Type Superplasticizer on the Paste Fluidity Based on the Water Film Thickness of Flocs

Effects of Mineral Admixtures on the Evolution of Static Yield Stress of Different Composite Pastes

Influences Of Chemical Admixtures With Different Sizes On Pore Structure And Impermeability Of The Hardened Cement

Study on Compatibility of Comb-like Polycarboxylic Acid Type Water-reducer with Cements

Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution