Abstract:To investigate the carbonation regularity in concrete of 100mm×100mm×400mm, in the environment, (20±3)% (volume fraction) concentration of CO2, (70±5)% relative humidity and (20±2)°C temperature. The concrete specimens were divide into two parts: curing 28dayswith temperature of (20±2)°C and the relative humidity ⩾95% (named wet curing), and then curing for 3years (named A condition) with the relative humidity of (60±5)% and the temperature of (20±2)°C (named dried curing) and long-age wet curing for 90days (named B condition). The water-binder ratio was 0.37, 0.45 and 0.53, the content of fly ash substituting for the equal quality of cement by mass was 0%, 30% and 60%, respectively. Based on the scanning electron microscope (SEM) morphology of the interfacial transition zone of concrete’s coarse aggregate and X-ray diffraction (XRD) analysis, the influence mechanism of wet curing for 90days on the fly ash concrete carbonation resistance ability was analyzed. The results show that the wet curing for 90days had the positive effect of dense interfacial zone and the negative effect of calcium hydroxide consumption on the concrete carbonation resistance ability. In the case of high fly ash content with low water-binder ratio or low fly ash content with high water-binder ratio, the dense effect of the interfacial transition zone of concrete’s coarse aggregate occupied a dominant position, and the carbonation resistance ability was greatly improved after wet curing for 90days. The average increment value of carbonation depth of fly ash concrete in each group decreased by 53.5% compared with the specimens cured under A condition. When the water-binder ratio and the fly ash content were either higher or lower, the positive effect of dense interfacial zone and the negative effect of calcium hydroxide consumption had little significant effect on the concrete carbonation resistance ability, and the wet curing for 90days had no obvious influence on improving the carbonation resistance ability. At present, the average increment value of carbonation depth of fly ash concrete in each group decreased only by 11.5% of that under A condition.

Durability of High-Volume Fly Ash Concrete Subjected to Drying-Wetting Cycles and Carbonation Coupling Effects

Durability Of High Volume Fly Ash Concrete Used In Channel Revetment

Long-Age Wet Curing Effect on Performance of Carbonation Resistance of Fly Ash Concrete

Investigation on Durability of Fly Ash Aerated Concrete

The Effect of Fly Ash Qualify on the Properties of Concrete

DURABILITY OF LOW STRENGTH CONCRETE WITH HIGH VOLUME FLY ASH SUBJECTED TO SULFATE ATTACK

Effect of Carbonation Curing on Durability of Cement Mortar Incorporating Carbonated Fly Ash Subjected to Freeze-Thaw and Sulfate Attack

Effect of decarbonization of high carbon fly ash on workability, mechanical properties and durability of concrete

STUDY ON CARBONATION OF FLY ASH CONCRETE WITH FREEZE-THAW CYCLE

Impacts of Wetting Fly Ash on the Properties of Concrete

Fracture Mechanical Properties of Steel Fiber Reinforced Self-Compacting Concrete under Dry–Wet Cycle Sulfate Attack

Compressive strength, flexural strength, and durability of high-volume fly ash concrete

1D and 2D carbonation of fly ash concrete under flexural stress

Effect of Supercritical Carbonation on the Strength and Heavy Metal Retention of Cement-Solidified Fly Ash

Multi-dimensional carbonation and service life prediction model of fly ash concrete subjected to flexural stress and CO2 attack

Strength Time–Varying and Freeze–Thaw Durability of Sustainable Pervious Concrete Pavement Material Containing Waste Fly Ash

Drying shrinkage, durability and microstructure of foamed concrete containing high volume lime mud-fly ash

Tests of Compressive Strength and Durability of Concrete Added with High Lime Fly Ash

Carbonation Characteristics of Concrete with Different Fly–Ash Contents

Natural and Accelerated Carbonation of Concrete Containing Fly Ash and Ggbs after Different Initial Curing Period

EXPERIMENTAL STUDY ON CARBONATION PROPERTIES OF CONCRETE BASED ON BENDING LOAD DAMAGE