Abstract:The application of centrifugal compressors is extensive in industries such as aerospace and energy. The blade is the primary factor affecting the aerodynamic performance of compressors. In this paper, the aerodynamic performance of a centrifugal compressor with leaned and bowed 3D blades is investigated. The spanwise section profiles of the blade in the circumferential direction are deflected at different angles, resulting in four compressors with distinct leaned and bowed 3D blades based on the original model. There is a significant change in isentropic efficiency of the modified models under design conditions. Specifically, models 1, 3, and 4 experienced an increase of 0.97%, 1.04%, and 0.79%, respectively, while model 2 experienced a decrease of 0.70%. The profile of the blade tip and 50% spanwise section are shifted towards the suction surface, resulting in a geometric structure where the blade is concave towards the pressure surface. This structure gradually lifts the flow from the blade root to the blade tip downstream to the outlet area of the flow channel, reducing the load on the trailing edge of the blade and making the flow more closely aligned with the blade. At the same time, the larger radial velocity gradient near the blade tip suppresses the backflow on the shroud side, making the flow at the impeller outlet more stable. The outlet velocity of the impeller is more evenly distributed along the spanwise and circumferential directions, which improves the flow at the inlet of the diffuser and enhances the efficiency of the diffuser. Due to the high spanwise height of the leading edge of the blade, this bowed blade structure has little effect on the spanwise curvature upstream of the blade, resulting in negligible influence on the flow of the upstream channel.

The Aerodynamic Design and Investigation of Loading Distribution of a Mixed Flow Compressor

Investigation on Aerodynamic Performance of a Centrifugal Compressor with Leaned and Bowed 3D Blades

Application of Complex 3D Aerodynamic Layout in Highly Loaded Compressor on Numerical Simulation

Investigation of Highly Loaded Compressor Aerodynamic Design Adopting Complex 3D Aerodynamic Layout

Research on 3D Design of High-Load Counter-Rotating Compressor Based on Aerodynamic Optimization and CFD Coupling Method

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Bleed air CFD modelling in aerodynamic simulation of A heavy duty gas turbine compressor

Development of A Throughflow Method for Aerodynamic Analysis of Highly Loaded Axial Flow Compressors

PERFORMANCE ANAIYSIS OF INTERMEDIATE STAGE OF A MULTI-STAGE CENTRIFUGAL COMPRESSOR WITH MIXED GAS

Design And Test Of A Novel Highly-Loaded Compressor

Design Method of Blade Passage for Axial Compressor by Lofting along Flow Direction

AERODYNAMICS OPTIMUM DESIGN OF BLADES IN CENTRIFUGAL COMPRESSOR

Synthetically aerodynamic design and optimization on the stationary units of centrifugal compressor

Aerodynamic Analysis and Three-Dimensional Redesign of a Multi-Stage Axial Flow Compressor

Optimized Aerodynamic Design of Multi-blade Rows of an Axial Compressor

Development and application of a throughflow method for high-loaded axial flow compressors

Aerodynamic Optimization Design for All Condition of Centrifugal Compressor

An Aerodynamic Design and Numerical Investigation of Transonic Centrifugal Compressor Stage

Aerodynamic Design Method of High Loaded Supersonic Axial-Compressor with Low Reaction

Optimization Design of Variable Fillet for Different Boundary Thicknesses in a Highly Loaded Compressor Cascade

Performance Improvement of a High Loading Centrifugal Compressor with Vaned Diffuser by Hub Contour Optimization