Distribution Characteristics and Simplified Model of External Explosion Loading on Large-Scale Doom-Roof Steel Tanks
Zhen Wang,Ke Hu,Yang Zhao
DOI: https://doi.org/10.1016/j.istruc.2024.106150
IF: 4.1
2024-01-01
Structures
Abstract:Large-scale cylindrical steel welded tank is widely used in the storage of petrochemical products such as LNG, LPG and so on. Among the external accidental loadings that the oil storage tank may suffer, the external explosion loading has the characteristics of short duration, high peak value and great harm, which can easily lead to serious damage for the tank structure. In this paper, a TNT external explosion analysis model was developed to study the external explosion loading and its distribution for steel tanks. According to experimental data given in existing relevant literatures, the validity of numerical model and the accuracy of simulation results were verified. The change of external explosion flow field was obtained through numerical simulation for typical tank, and the distribution characteristics of explosion loading for ground explosion on the outer wall of tank was studied through parameter analysis. Simplified model of external explosion loading was finally obtained by fitting method. The results show that: 1) Along the height direction, with the increases of the height for steel tank, the reflected peak overpressure gradually decreases and the arrival time for wave front lags behind. In the front tank wall region, the maximum peak overpressure appear near the region of z/Hw= 0.2. Along the circumference direction, with the increases of the circumferential angle for steel tank wall, the reflected peak overpressure gradually decreases, and explosion loading distribution can be mainly divided into reflection region and diffraction region. 2) As the scaled distance increases, the external explosion loading for tank decreases significantly and the time of shock wave reaching the tank wall will lag correspondingly. As the height-to-diameter ratio of tank increases (only changing the height), the change of the external explosion loading on the circumferential distribution and height distribution of tank is not obvious. As the tank capacity increases, the diffraction critical angle decreases gradually, and region with theta > 90(degrees) is generally regarded as the diffraction region. 3) The time history curve of explosion loading at any position on the tank wall can be obtained quickly and conveniently through the calculation formula of the simplified model.