Metal-free 1,3-Dipolar Cycloaddition Polymerization Via Prearrangement of Azide and Alkyne in the Solid State

Xiao Meng,Hao Chen,Shu Xu,Yuguo Ma

DOI: https://doi.org/10.1039/c4ce01690d

IF: 3.756

2014-01-01

CrystEngComm

Abstract:Metal-free 1,3-dipolar cycloaddition polymerization with controlled regioselectivity is achieved in the solid state, and soluble polymers are obtained with monomers containing flexible tri- and tetra-ethylene glycol linkers.

What problem does this paper attempt to address?

Efficient and Regioselectivity-Tunable Metal-Free Polycycloaddition of Activated Azide and Alkynes

Yongwei Wu,Benzhao He,Jia Wang,Rongrong Hu,Zujin Zhao,Fei Huang,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1002/marc.201600620

IF: 5.006

2017-01-01

Macromolecular Rapid Communications

Abstract:The transition-metal catalyzed and metal-free click polymerizations have been developed as powerful tools for the construction of functional polymers with linear and hyperbranched structures. The latter provides a thorough solution for the completely removing metallic residues from the products encountered in the former. Compared to the activated alkyne-azide metal-free click polymerization, the activated azide-alkyne one is rarely studied. In this Communication, a perfluorophenyl-activated azide of hexane-1,6-diyl-bis(4-azido-2,3,5,6-tetrafluorobenzoate) is rationally designed and facilely prepared. Through systematical optimization of the reaction conditions, an efficient metal-free perfluorophenylazide-alkyne polycycloaddition is established, and polytriazoles with high molecular weights (up to 166 000) and excellent solubility are obtained in excellent yields (up to 93%) under mild reaction conditions. Interestingly, the regioselectivity of the reaction could be fine-tuned by the solvents and diyne monomers. Therefore, this work provides not only a powerful tool for the preparation of functional polytriazoles, but also an attractive method for fine-tuning their regioregularity.
Metal-free click polymerizations of activated azide and alkynes

Qiang Wang,Hongkun Li,Qiang Wei,Jingzhi Sun,Jianfeng Wang,Xiao A. Zhang,Anjun Qin,Benzhong Tang

DOI: https://doi.org/10.1039/c2py20797d

IF: 4.6

2013-01-01

Polymer Chemistry

Abstract:The Cu(I)-catalyzed azide-alkyne click polymerization has become a powerful tool for the preparation of functional polytriazoles. However, copper residues in the products could harm the performance of optoelectronic devices and be cytotoxic in biological applications. The complete removal of these residues after reaction from the polymers is therefore necessary but difficult. The metal-free azide-alkyne click polymerization (MFCP) provides a solution to this problem. Currently, the MFCP is facilitated by activated alkynes, and no activated comonomer, i.e. azide, has been reported. In this paper, an activated azide, 4,4'-diazidoperfluorobenzophenone , was designed and synthesized. Compared to the ordinary azide, such a monomer can remarkably accelerate the MFCP with alkynes. Thus, a new MFCP of activated azide and alkyne was established, and polytriazoles with high regioregularity (fraction of 1,4-isomer higher than 82%) and satisfactory molecular weights (M-w up to 34 000) were produced in high yields (up to 95.1%).
Amine-catalyzed Polycyclotrimerization of Arylene Bipropiolate: A Metal-Free and Regioselective Route to Hyperbranched Polymer

Cathy K. W. Jim,AnJun Qin,Jacky W. Y. Lam,JianZhao Liu,Matthias Haeussler,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-008-0086-4

2008-01-01

Science in China Series B Chemistry

Abstract:This paper presents a new synthetic route to hyperbranched polymer. An arylene bipropiolate monomer, dimethylmethylenebis(1,4-phenylene) bipropiolate, was prepared by a one-step esterification reaction of bisphenol A with propiolic acid. Polycyclotrimrtization of the monomer was effected by reflux in dimethylformamide (DMF), producing a soluble hyperbranched poly(aroxycarbonylphenylene) in a good yield. The polymer was perfectly branched with a degree of branching of 100%.
Aluminum bis(iminophosphorano)methanide and methandiide complexes—transition metal-free ethylene polymerization cationic catalyst precursors

Ronald G. Cavell,Kasani Aparna,R.P. Kamalesh Babu,Qinyan Wang

DOI: https://doi.org/10.1016/S1381-1169(02)00205-4

2002-01-01

Abstract:The catalytic activity of a new family of aluminum bis(iminophosphorano)methanide and methandiide complexes (1–5) toward olefin polymerization has been evaluated. The complexes (1–3) are monomeric methanide complexes of the form [κN,κN′-{(Me3SiNP(Ph)2)2CH}Al(Cl)R] (R=Et) (1) or [κN,κN′-{(Me3SiNP(Ph)2)2CH}AlR2} (R=Me, Bu) (2, 3) which have a structure reminiscent of R2Al(acac) complexes. These systems are moderately effective as transition metal-free ethylene polymerization catalysts when activated by trityl tetrafluoroborate yielding slurry polymerization activities in the range of 3–68g polymer/(mmol Alh) (normalized to 1atm) under normal industrial conditions. A remarkable bis(iminophosphorano)methandiide complex [κC,κC,κN,κN′-{(Me3SiNP(Ph)2)2C}(R2Al)2] (R=Me) (4) which is based on a spirocyclic carbon center subtended by two AlMe2 units (each of which is further coordinated with an imine group) gave, under similar catalytic activation and reaction conditions, very high polymerization activity (2×103g polymer/(mmol Alh)) for ethylene. Solution polymerization activity was also high. This system also co-polymerized ethylene and 1-octene. The analog 5 wherein R=Bu was not so effective. These latter complexes indicate that dialuminum species may provide effective transition metal-free olefin polymerization systems.
Construction Of Functional Macromolecules With Well-Defined Structures By Indium-Catalyzed Three-Component Polycoupling Of Alkynes, Aldehydes, And Amines

Carrie Yin Kwan Chan,NaiWen Tseng,Jacky Lam,Jianzhao Liu,Ryan Tsz Kin Kwok,Benzhong Tang

DOI: https://doi.org/10.1021/ma4005346

IF: 5.5

2013-01-01

Macromolecules

Abstract:We present here a new programmable polymerization route for the synthesis of new conjugated polymers via one pot reaction route. The three component polycoupling reactions of terephthalaldehyde and dibenzylamine with 4,4'diethynyl-1,1'-biphenyl, bis(4-ethynylphenyl)dimethylsilane, 1,2-bis(4-ethynylphenyl)-1,2-diphenylethene, N,N-bis(4ethynylphenyl)aniline, or 2,5-bis(4-ethynylphenyl)-1,1-dimethyl-3,4-diphenylsilole are catalyzed by indium(III) chloride in oxylene at 140 C, affording soluble polymers with well-defined structures and high molecular weights (M up to 51 200) in high yields (up to 96.9%). Model reaction was carried out to elucidate the chemical structures of the polymers. The resulting polymers are processable and enjoy high thermal stability. The polymers carrying tetraphenylethene and silole units are weakly emissive in solutions but become strong emitters when aggregated in poor solvents or fabricated as thin films in the solid state, displaying a phenomenon of aggregation enhanced emission characteristic Thin films of the polymers show high refractive indices (n = 1.7529-1.6041) in a wide wavelength region of 400-1600 nm with low optical dispersions (D' down to 0.005). The polymers are readily metallified by complexation of their triple bonds with cobalt octacarbonyls. Pyrolysis of the resulting organometallic polymers at high temperature under inert atmosphere generates nanostructured ceramics with high magnetic susceptibility (M-s up to 80.7 emu/g) and near zero coercivity (H-c down to 0.19 kOe).
Efficient polymerization of azide and active internal alkynes.

Qiang Wei,Haiqin Deng,Yunbo Cai,Jacky W Y Lam,Jie Li,Jingzhi Sun,Meng Gao,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1002/marc.201200212

IF: 5.006

2012-01-01

Macromolecular Rapid Communications

Abstract:The 1,3-dipolar cycloaddition of azides and active internal alkynes has been well studied, but is rarely utilized as a tool for polymer preparation. In this work, an efficient polymerization route is developed. Polycycloaddition of diazide (4) and bis(benzoylethynyl)-benzenes and -butane (3) at elevated temperature has produced the first examples of soluble 1,4,5-trisubstituted polytriazoles PI with satisfactory molecular weights (Mw up to 16 400) in excellent yields (up to 98.6%). All the obtained polymers are thermally stable, losing merely 5% of their weights at temperatures higher than 367 degrees C. They exhibit higher refractive indices than some commercial plastics and can be crosslinked upon UV irradiation to generate a 3D photopattern with high resolution. The metal-free feature of such a methodology offers a facile tool to prepare functional materials free from the contamination of metal species.
Metal-Free Catalysts for the Polymerization of Alkynyl-Based Monomers

Jie Zhang,Zhiming Zhang,Fulin Yang,Haoke Zhang,Jingzhi Sun,Benzhong Tang

DOI: https://doi.org/10.3390/catal11010001

IF: 3.9

2020-01-01

Catalysts

Abstract:Novel polymerizations based on alkyne monomers are becoming a powerful tool to construct polymers with unique structures and advanced functions in the areas of polymer and material sciences, and scientists have been attracted to develop a variety of novel polymerizations in recent decades. Therein, catalytic systems play an indispensable role in the influence of polymerization efficiencies and the performances of the resultant polymers. Concerning the shortcomings of metallic catalysts, much of the recent research focus has been on metal-free polymerization systems. In this paper, metal-free catalysts are classified and the corresponding polymerizations are reviewed, including organobase-catalyzed polymerizations, Lewis-acid-catalyzed polymerizations, as well as catalyst-free polymerizations. Moreover, the challenges and perspectives in this area are also briefly discussed.
Transition-Metal-Free Polymerization Of Bromoalkynes And Phenols

Jie Zhang,Jing Zhi Sun,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.macromol.9b00306

IF: 5.5

2019-01-01

Macromolecules

Abstract:Exploration of efficient and powerful polymerization methodologies is of crucial importance for polymer science. Among the established polymerization methodologies, the polymerization of internal alkynes is less developed and still in its infancy stage. In this work, a new polymerization of internal alkynes of bromoalkynes and phenols is established, and polymers with high weight-average molecular weights (up to 47 600) are obtained in excellent yields (up to 95.2%) in as short as 1 h without using a complex transition-metal catalytic system. The resultant polymers possess good solubility, exhibit high thermal stability, and could display typical aggregation-induced emission (AIE) characteristics upon introduction of tetraphenylethylene, a typical AIE-active luminogen. Moreover, the polymers could be post-modified by a thiophenol derivative because they contain bromovinyl groups in each repeating unit, enabling it to possess a higher refractive index than that of the pristine one. Therefore, it displays a convenient platform for polymer functionalization. This work not only establishes a new polymerization of bromoalkynes and phenols but also provides a powerful strategy for the preparation and modification of functional polymers under mild reaction conditions without using transition-metal catalysts.
Topochemical 1,3-Dipolar Cycloaddition Polymerization Assisted by Non-Covalent Interactions

Xiao Meng,Shu Xu,Changqing Chen,Lihui Guo,Yuguo Ma

DOI: https://doi.org/10.1039/d3ce00105a

IF: 3.756

2023-01-01

CrystEngComm

Abstract:An efficient topochemical azide–alkyne cycloaddition polymerization of monomers, which comprised phenylene and tetrafluorophenylene units linked by alkylene linkers and terminated by azide and alkyne groups, was achieved through a supramolecular approach.
Metal-free Click Polymerization of Propiolates and Azides: Facile Synthesis of Functional Poly(aroxycarbonyltriazole)s

Hongkun Li,Jian Wang,Jing Zhi Sun,Rongrong Hu,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1039/c2py00586g

IF: 4.6

2012-01-01

Polymer Chemistry

Abstract:.Azide-alkyne click polymerization is generally catalyzed by the Cu(I) complex, in which the removal of metallic residues after reaction remains challengeable. In this work, a metal-free click polymerization method was developed to avoid this problem. The diazide monomers (9 and 10) could readily react with aromatic and aliphatic dipropiolates (1 and 2) under simple heating to produce functional poly(aroxycarbonyltriazole)s (PACTs), a kind of polyester, with high molecular weights (M-w up to 23 500) and regioregularities (fraction of 1,4-disubstituted 1,2,3-triazole in polymers up to similar to 90%) in excellent yields (up to similar to 99%). The metal-free click polymerization also propagates smoothly in an open atmosphere without protection from oxygen and moisture. The PACTs are thermally stable, with 5% loss of their weights at temperatures higher than 335 degrees C. Thanks to the contained ester groups, the polymers can be rapidly degraded in the presence of potassium hydroxide aqueous solution. The PACT containing tetraphenylethene units exhibits a unique feature of aggregation-induced emission and can function as a fluorescent chemosensor to detect explosives in a superamplified manner.
Palladium/Benzoic Acid-Catalyzed Regio- and Stereoselective Polymerization of Internal Diynes and Diols Through C(sp(3))-H Activation

Jia Wang,Tianwen Bai,Yue Chen,Canbin Ye,Ting Han,Anjun Qin,Jun Ling,Ben Zhong Tang

DOI: https://doi.org/10.1021/acsmacrolett.9b00448

IF: 5.8

2019-01-01

ACS Macro Letters

Abstract:The C-H activation has been a hot research area in organic chemistry, and the most difficult one is the C(sp(3))-H activation. Although the C-H activation has been introduced to the research of synthetic polymer chemistry, the polymerization developed based on C(sp(3))-H activation is rarely reported, which will enrich the tools for the preparation of functional polymers. In this work, palladium/benzoic acid catalyzed polymerization of internal diynes and diols through C(sp(3))-H activation was successfully established. Regio-and stereoregular functional poly(allylic ether)s with 100% E-isomers and high weight average molecular weights (M-w up to 33200) were prepared in excellent yield (98%). The reaction mechanism was unveiled with the assistance of density functional theory calculations. Furthermore, the thin films of polymers display high refractive indices and low optical dispersions. The polymer containing tetraphenylethene moiety displays the aggregation-enhanced emission feature and could be used to generate 2D fluorescent photopattern. Thus, this work not only establishes a powerful polymerization based on C(sp(3))-H activation, but also furnishes functional polymers for diverse applications.
Metal-free Polycycloaddition of Aldehyde-Activated Internal Diynes and Diazides Toward Post-Functionalizable Poly(formyl-1,2,3-triazole)s

Baixue Li,Anjun Qin,Ben Zhong Tanga

DOI: https://doi.org/10.1039/d0py00193g

IF: 4.6

2020-01-01

Polymer Chemistry

Abstract:A metal-free polycycloaddition of aldehyde-activated internal diynes and diazides was successfully established and post-functionalizable poly(formyl-1,2,3-triazole)s were readily produced.
Transition Metal Acetylide Catalysts for Polymerization of Polar Alkynes

Xiaowei Zhan,Mujie Yang,Hongmei Sun

DOI: https://doi.org/10.1023/a:1019031720117

2001-01-01

Journal of Molecular Catalysis A Chemical

Abstract:A new series of single‐component air‐stable transition metal acetylide catalysts with the structures ML2(C≡CR)2 (M = Ni and Pd, L = PPh3 and PBu3, R = p‐C6H4C≡CH, C6H5, H, CH2OH, CH2OCOCH3, CH2OCOC6H5 and CH2OCOC6H4OH‐o) for polymerization of polar alkynes were developed. Transition metals, phosphine and alkynyl ligands and solvents exhibited significant influence on the polymerization. Propargyl alcohol could be polymerized with these catalysts under mild conditions to give soluble rich‐trans polymers with weight average molecular weights as high as 5.7 × 104 in yields as high as 79%.
SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

An-jun Qin,Cathy K. W. Jim,Jacky W. Y. Lam,Jing-zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1142/s0256767909003765

2009-01-01

Chinese Journal of Polymer Science

Abstract:A new bis(aroylacetylene) containing triazole and fluorene moieties is synthesized by click chemistry. Polycyclotrimerization of the monomer is catalyzed by piperidine in refluxed dioxane, furnishing a regioregular poly(aroylarylene) in a satisfactory yield. The hyperbranched structure of the polymer is characterized spectroscopically with satisfactory results. The polymer enjoys no metal detriment and is soluble in common organic solvents such as tetrahydrofuran (THF), chloroform, dichloromethane (DCM), and N,N-dimethylformamide (DMF).
Regioselective Metal‐Free Click Polymerization of Azides and Alkynes

anjun qin,yong liu,ben zhong tang

DOI: https://doi.org/10.1002/macp.201400571

IF: 2.996

2015-01-01

Macromolecular Chemistry and Physics

Abstract:The Cu(I)-catalyzed azide-alkyne click polymerization is well developed and broadly applied to the preparation of functional polymers. The removal of copper residues from the resultant polymers is, however, difficult. One way to completely circumvent this difficulty is to develop click polymerization without the use of metallic catalysts, i.e., metal-free click polymerization (MFCP). Herein, recent efforts towards developing MFCP of activated alkynes and azides, and of activated azides and alkynes, to produce regioregular polytriazoles are summarized, and the properties and applications of the resultant polymers are also briefly discussed.
Facile Synthesis of Poly(aroxycarbonyltriazole)s with Aggregation-Induced Emission Characteristics by Metal-Free Click Polymerization

HongKun Li,Ju Mei,Jian Wang,Shuang Zhang,QiuLi Zhao,Qiang Wei,AnJun Qin,JingZhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-011-4235-9

2011-01-01

Science China Chemistry

Abstract:Regioseletive 1,3-dipolar polycycloadditions of 4,4′-isopropylidenediphenyl dipropiolate ( 1 ) and tetraphenylethene (TPE)-containing diazides ( 2 ) are carried out in polar solvents such as DMF/toluene at a moderate temperature of 100 °C for 6 h, producing poly(aroxycarbonyltriazole)s (PACTs) P 3 with high molecular weights ( M w up to 23900) and regioregularities ( F 1,4 up to ∼90%) in high yields (up to ∼99%). These metal-free click polymerizations can propagate smoothly in an open atmosphere without protection from oxygen and moisture. The obtained polymers are soluble in common organic solvents and thermally stable at temperatures up to 375 °C. Thanks to their contained TPE moieties, the PACTs show aggregation-induced emission and can serve as fluorescent chemosensors for superamplified detection of explosives.
Metallo‐Helicoid with Double Rims: Polymerization Followed by Folding by Intramolecular Coordination

Guang-Qiang Yin,Sneha Kandapal,Chung-Hao Liu,Heng Wang,Jianxiang Huang,Shu-Ting Jiang,Tan Ji,Yu Yan,Sandra Khalife,Ruhong Zhou,Libin Ye,Bingqian Xu,Hai-Bo Yang,Mu-Ping Nieh,Xiaopeng Li

DOI: https://doi.org/10.1002/anie.202010696

2020-01-01

Angewandte Chemie

Abstract:In this study, we established a feasible strategy to construct a new type of metallo-polymer with helicoidal structure through the combination of covalent polymerization and intramolecular coordination-driven self-assembly. In the design, a tetratopic monomer (M) was prepared with two terminal alkynes in the outer rim for polymerization, and two terpyridines (TPYs) in the inner rim for subsequent folding by selective intramolecular coordination. Then, the linear covalent polymer (P) was synthesized by polymerization of M via Glaser-Hay homocoupling reaction. Finally, intramolecular coordination interactions between TPYs and Zn(II) folded the backbone of P into a right- or left-handed metallo-helicoid (H) with double rims. Owing to multiple positive charges on the inner rim of helicoid, double-stranded DNA molecules (dsDNA) could interact with H through electrostatic interactions. Remarkably, dsDNA allowed exclusive formation of H with right handedness by means of chiral induction.
Synthesis And Solution Self-Assembly Of Poly(1,3-Dioxolane)

Huan Qiu,Zhening Yang,Moritz Köhler,Jun Ling,Felix H. Schacher

DOI: https://doi.org/10.1021/acs.macromol.9b00302

IF: 5.5

2019-01-01

Macromolecules

Abstract:Poly(1,3-dioxolane) (PDO) is widely used as a pH- and temperature-sensitive water-soluble polymer applied in functional hydrogels and nanoparticles. In this contribution, we report a series of highly efficient rare-earth triflate catalysts for a Bronsted-acid-free ring-opening polymerization of DO. The repeat unit of PDO comprises perfectly alternating hydrophilic ethylene glycol and hydrophobic methyl aldehyde units leading to hydrogen-bonding-controlled self-assembly in aqueous solution. Spherical aggregates are observed in transmission electron microscopy images whose sizes can be tuned by concentration and temperature, further confirming that the hydrate is derived from "blocked" water molecules through hydrogen bonding. The size and morphology of the aggregates can be modulated not only by the annealing process owing to the realignment of semicrystalline regions but also by metal salts generating rodlike, wormlike, or spherical structures. In this case, PDO is able to act as both a surfactant and as a reductant on account of the acidolysis of acetal moieties, which form a core-shell Cu-decorated hybrid material in situ in one step, thus providing a promising future template for the generation of metal nanoparticles.
Synthesis of 1,5-Regioregular Polytriazoles by Efficient NMe4OH-mediated Azide–alkyne Click Polymerization

Yong Liu,Jia Wang,Die Huang,Jie Zhang,Shang Guo,Ronrong Hu,Zujin Zhao,Anjun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1039/c5py00186b

IF: 4.6

2015-01-01

Polymer Chemistry

Abstract:Aromatic alkynes and azides were successfully polymerized under metal-free conditions using tetramethylammonium hydroxide (NMe4OH) as an organocatalyst at room temperature and soluble 1,5-regioregular polytriazoles P3a–P3e with high molecular weights (Mw up to 56 000) were readily produced in high yields (up to 96%).
Non-metal with Metal Behavior: Metal-Free Coordination-Insertion Ring-Opening Polymerization

Xin Wang,Jiaxi Xu,Zhenjiang Li,Jingjing Liu,Jie Sun,Nikos Hadjichristidis,Kai Guo

DOI: https://doi.org/10.1039/d1sc02551a

IF: 8.4

2021-01-01

Chemical Science

Abstract:The first metal-free “coordination-insertion” ROP of cyclic carbonate and lactones mediated by N-trimethylsilyl-bis(trifluoromethanesulfonyl)imide (TMSNTf2) was proposed, which in the past was exclusively the monopoly of metal complex catalysts.

Metal-free 1,3-Dipolar Cycloaddition Polymerization Via Prearrangement of Azide and Alkyne in the Solid State

Efficient and Regioselectivity-Tunable Metal-Free Polycycloaddition of Activated Azide and Alkynes

Metal-free click polymerizations of activated azide and alkynes

Amine-catalyzed Polycyclotrimerization of Arylene Bipropiolate: A Metal-Free and Regioselective Route to Hyperbranched Polymer

Aluminum bis(iminophosphorano)methanide and methandiide complexes—transition metal-free ethylene polymerization cationic catalyst precursors

Construction Of Functional Macromolecules With Well-Defined Structures By Indium-Catalyzed Three-Component Polycoupling Of Alkynes, Aldehydes, And Amines

Efficient polymerization of azide and active internal alkynes.

Metal-Free Catalysts for the Polymerization of Alkynyl-Based Monomers

Transition-Metal-Free Polymerization Of Bromoalkynes And Phenols

Topochemical 1,3-Dipolar Cycloaddition Polymerization Assisted by Non-Covalent Interactions

Metal-free Click Polymerization of Propiolates and Azides: Facile Synthesis of Functional Poly(aroxycarbonyltriazole)s

Palladium/Benzoic Acid-Catalyzed Regio- and Stereoselective Polymerization of Internal Diynes and Diols Through C(sp(3))-H Activation

Metal-free Polycycloaddition of Aldehyde-Activated Internal Diynes and Diazides Toward Post-Functionalizable Poly(formyl-1,2,3-triazole)s

Transition Metal Acetylide Catalysts for Polymerization of Polar Alkynes

SYNTHESIS OF A HYPERBRANCHED POLY(AROYLARYLENE) CONTAINING TRIAZOLE AND FLUORENE FUNCTIONALITIES BY CLICK CHEMISTRY AND METAL-FREE,REGIOSELECTIVE POLYCYCLOTRIMERIZATION

Regioselective Metal‐Free Click Polymerization of Azides and Alkynes

Facile Synthesis of Poly(aroxycarbonyltriazole)s with Aggregation-Induced Emission Characteristics by Metal-Free Click Polymerization

Metallo‐Helicoid with Double Rims: Polymerization Followed by Folding by Intramolecular Coordination

Synthesis And Solution Self-Assembly Of Poly(1,3-Dioxolane)

Synthesis of 1,5-Regioregular Polytriazoles by Efficient NMe4OH-mediated Azide–alkyne Click Polymerization

Non-metal with Metal Behavior: Metal-Free Coordination-Insertion Ring-Opening Polymerization