Abstract:The self-designed indoor simulated rainfall device was used to rain on five types of pavement structures with 4 types of rainfall intensity (2.5 mm/min, 3.4 mm/min, 4.6 mm/min, and 5.5 mm/min). The effect of rainfall intensity on the surface runoff, the relation between the subgrade soil moisture content changes, and the influence of initial soil water content on rain infiltration rate are studied. The test results show that the surface runoff coefficient of densely asphalted pavement is greater than 90% in drainage pavements and it has little influence on the reducing and hysteresis of the flood peak. The surface runoff coefficient of large-void asphalt pavement (permeable) is less than 40%. Although the large-void asphalt pavement (permeable) can reduce a small amount of surface runoff, it has no obvious effect on the reduction and hysteresis of the flood peak. In semipermeable pavement, with the increasing of the thickness of base (graded gravel), the surface runoff coefficient decreases at different rainfall intensities, parts of the surface runoff are reduced, and the arrival of flood peaks is delayed. In permeable roads, almost no surface runoff occurred. As time continued, the soil moisture content quickly reached a saturated state and presented a stable infiltration situation under the action of gravity and the gradient of soil water suction. As the initial moisture content increases, the initial infiltration rate decreases and the time to reach a stable infiltration rate becomes shorter. The drier the soil, the greater the initial infiltration rate and the higher the soil moisture content after infiltration stabilization. Permeable roads can greatly alleviate the pressure of urban drainage and reduce the risk of storms and floods.

Long-Term Field Performance of Porous Asphalt Pavement in China

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Indexes for Timing of Asphalt Pavement Preventive Maintenance (PPM) Based on Pavement Functional Performance

State-of-the-art of porous asphalt pavement: Experience and considerations of mixture design

Noise Performance of Drainage Asphalt Pavement

Laboratory and field evaluation of noise characteristics of porous asphalt pavement

Interface Treatment of Longitudinal Joints for Porous Asphalt Pavement

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Study on the Influential Factors of Noise Characteristics in Dense-Graded Asphalt Mixtures and Field Asphalt Pavements

Design and implementation of a full-scale accelerated pavement testing facility for extreme regional climates in China

Noise Reduction Characteristics of Macroporous Asphalt Pavement Based on A Weighted Sound Pressure Level Sensor

Performance Evaluation of Pervious Pavement Using Accelerated Pavement Testing System

Field Testing of Porous Pavement Performance on Runoff and Temperature Control in Taipei City

Numerical Evaluation On The Filtration And Clogging Behavior Of Porous Pavement

Experimental Study on the Polyurethane-Bound Pervious Mixtures in the Application of Permeable Pavements

Study on Variation of Surface Runoff and Soil Moisture Content in the Subgrade of Permeable Pavement Structure

The Environmental Impact Evaluation on the Application of Permeable Pavement Based on Life Cycle Analysis

Experimental investigation on the development of pore clogging in novel porous pavement based on polyurethane

Pavement Properties and Predictive Durability Analysis of Asphalt Mixtures

Semi-rigid Asphalt Pavement's Premature Failures on Chinese Motorway Network

Long-Term Service Performance of Hard-Grade Asphalt Concrete Base Pavement Based on Accelerated Loading Test of Full-Scale Structure