Abstract:The mechanical response of asphalt pavement under vehicular loading is an essential reference for crack-resistant pavement design. However, limited research focuses on the mechanical response measurement of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder. Therefore, two types of asphalt pavements were constructed. The first type of asphalt pavement uses a large-particle-size crushed stone base treated with fly ash and slag powder, where the slag powder uses granulated blast furnace slag powder. The second type uses a conventional cement-stabilized crushed stone base and serves as a reference structure. Firstly, the strain gauges and temperature sensors were installed during the construction of asphalt pavements. Secondly, the mechanical response of the pavement was tested at different speeds and service time conditions. Then, sensitivity analysis and three-factor analysis of variance (ANOVA) were carried out. Finally, the prediction equations were developed. The results show that the longitudinal strain pulse of the asphalt layer exhibited a “compression–tension–compression” characteristic. For the transverse strain pulse of the asphalt layer, the base layer’s transverse and longitudinal strain pulses were only shown as “tensile” characteristics. The vehicular speed significantly affected the strain values for the base and asphalt layers, showing a decreasing trend with increasing speed. For the asphalt layer, the strain values showed an increasing trend with increasing temperature; for the base layer, the strain values showed a decreasing trend with increasing service time. The type of base layer had a significant effect on the strain value. Compared with the conventional base layer, the large-particle-size crushed stone base treated with fly ash and slag powder had lower strain at the base layer and a lower position of the asphalt layer, which could better prevent bottom-up fatigue cracking. Finally, the strain prediction model of the pavement under the speed and temperature (service time) was fitted to obtain a model that can predict the mechanical response of the pavement under different operating conditions. The findings of this research can provide a reference for the design of asphalt pavement using a large-particle-size crushed stone base treated with fly ash and slag powder.

Design and implementation of a full-scale accelerated pavement testing facility for extreme regional climates in China

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Automatic Inverse Analysis of Asphalt Pavement Field Aging Based on System Identification

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Determination of Flexible Pavement Deterioration Conditions Using Long‐Term Pavement Performance Database and Artificial Intelligence‐based Finite Element Model Updating

Full-scale field test of early-age behaviour of partially continuous reinforced concrete pavement

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Study on fatigue performance of asphalt mixture in service life based on accelerated loading test

Cracking Propagation of Asphalt Pavement of Stabilized Base with Inorganic Binder under Coupling of Overloaded Traffic and Temperature

Field Measurement and Analysis on the Mechanical Response of Asphalt Pavement Using Large-Particle-Size Crushed Stone Base Treated with Fly Ash and Slag Powder

Long-Term Service Performance of Hard-Grade Asphalt Concrete Base Pavement Based on Accelerated Loading Test of Full-Scale Structure

Assessment of Pavement Structural Conditions and Remaining Life Combining Accelerated Pavement Testing and Ground-Penetrating Radar

A spectral analysis of the dynamic frequency characteristics of asphalt pavement under live vehicle loading

Design and Application of Driving Resistance Test Device for Aircraft Tire and Soil Pavement

Feasibility Study on Application of Full Depth Asphalt Pavement in National Trunk Road

Finite Element Analysis and Laboratory Testing for Design of Asphalt Concrete Pavement on Concrete Bridges

Design of a Novel Road Pavement Using Steel and Plastics to Enhance Performance, Durability and Construction Efficiency