Abstract:The water cooled ceramic breeder blanket (WCCB) is being researched for Chinese Fusion Engineering Test Reactor (CFETR). As an important component of the blanket, the FW should satisfy with the thermal requirements in any case. In this paper, three parameters including the heat removal capacity, coolant pressure drop as well as the temperature rise of the FW were investigated under different coolant velocity and heat flux from the plasma. Using the same first wall structure, two main water cooled schemes including Boiling Water Reactor (BWR, 7 MPa pressure and 265 degrees C temperature inlet) and Pressurized Water Reactor (PWR, 15 MPa pressure and 285 degrees C temperature inlet) conditions are discussed in the thermal hydraulic calculation. For further research, the thermal hydraulic characteristics of using helium as coolant (8 MPa pressure, 300 degrees C temperature inlet) are also explored to provide CFETR blanket design with more useful data supports. Without regard to the outlet coolant condition requirements of the blanket, the results indicate that the ultimate heat flux that the FW can resist is 2.2 MW/m(2) at velocity of 5 m/s for BWR, 2.0 MW/m(2) at velocity of 5 m/s for PWR and 0.87 MW/m(2) for helium at velocity 100 m/s under the chosen operation condition. The detrimental departure from nucleate boiling (DNB) crisis would occur at the velocity of 1 m/s under the heat flux of 3 MW/m(2) and dry out crisis appears at the velocity of less than 0.2 m/s with the heat flux of more than 1 MW/m(2) for BWR. The further blanket/FW optimization design is provided with more useful data references according to the abundant calculation results. (c) 2015 Elsevier B.V. All rights reserved.

Thermal–mechanical Analysis of the First Wall for CFETR Helium Cooled Solid Breeder Blanket

Evaluation on the Heat Removal Capacity of the First Wall for Water Cooled Breeder Blanket of CFETR

Thermo-Hydraulic Analysis Of The Optimized Helium Cooled Solid Breeder Blanket For Cfetr

Preliminary Design of the CFETR HCCB Blanket with S-Shaped Cooling Plate in BU and Thermal–Mechanical Analysis of the First Wall

Numerical Analysis of Heat Transfer in the First Wall of CFETR WCSB Blanket

Design, Analysis and Optimization of the First Wall Cooling System of the CFETR Blanket

Steady State and Transient Thermal Analysis of the Updated Helium-Cooled Solid Breeder Blanket for CFETR

Neutronics and Thermo-Hydraulic Analysis of Water-Cooled Blanket Based on Pwr and Scwr Water Conditions for Cfetr

Thermal Hydraulic Analysis of the HECLIC Blanket Breeder Unit for CFETR

Design of the Water-Cooled Ceramic Breeder Blanket for CFETR

Thermo-mechanical Analysis on the Full Module of Water Cooled Ceramic Breeder Blanket for CFETR

Thermo-mechanical Assessment of the Optimized CFETR Water Cooled Ceramic Breeder Blanket

Numerical research on the neutronic/thermal-hydraulic/mechanical coupling characteristics of the optimized helium cooled solid breeder blanket for CFETR

Preliminary Analysis of Flow and Heat Transfer Characteristics of WCSB Blanket Module First wall

Neutronics Influence of Poloidal Nonuniform Neutron Wall Loading on Helium-Cooled Ceramic Breeder Blanket for CFETR

Conceptual Design and Coupled Neutronic/thermal-Hydraulic/mechanical Research of the Supercritical Water Cooled Ceramic Blanket for CFETR

Thermal Hydraulic Analysis on the Water Lead Lithium Cooled Blanket for CFETR

Neutronics Optimization Study on the First Wall Design of CFETR for TBR Enhancement

Numerical Study on the Purge Gas Flow and Heat Transfer Characteristics in Helium Cooled Solid Breeder Blanket of CFETR

Studies on Flibe Blanket Designs in Helical Reactor FFHR

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR