Abstract:China lead bismuth eutectic (LBE) cooled fast reactor comprises of the primary system with lead bismuth eutectic (LBE) as the coolant, the secondary circuit with sub-cooled water as the coolant and the associated air cooling system for an effective rejection of thermal power to the environment as a final heat sink. The dynamic characteristics of LBE cooled fast reactor are different from the traditional Pressurized Water Reactors (PWRs) because of the variances in coolant properties as well as major differences due to the operation in the fast versus the thermal neutron spectrum. To investigate the dynamic characteristics of the CLEAR-IA reactor for control system design and simulation, a model for the main components of the reactor and the most relevant interactions among them is developed. Since all the coefficients in the models are functions of temperature, the models in this paper are not described by ordinary differential equation. These models are realized by using the S-function builder of SIMULINK. The steady state calculation result based on the thermal-hydraulic models show agreement with the design value. To show the proposed models could be used for the simulation, the transient process of parameter change is compared with Relap5 simulation code, which shows agreement. A Proportional-Integral (PI) controller is designed to keep the power following the set value as quickly as possible. To keep the inlet temperature of core coolant constant, a control strategy based on a simultaneous feed-forward and feedback scheme has been adopted. The feed-back control system is a PI controller and it can achieve a real time and no error control, but it has time delay. The feed-forward control can realize the control in advance before the LBE temperature at inlet of the core has been changed to reduce the overshoot. So the feed-forward can realize an advance and rough control, the feedback can realize a no error and accurate control. Based on the developed model and control strategy, dynamic simulations of the whole system in case of step changes of reactivity and set power are performed. The simulation results show that the proposed model is accurate enough to describe the dynamic behaviors of the plant in spite of its simplicity. It has also been demonstrated that the developed controllers for the CLEAR-IA can provide superior reactor control due to the efficiency of the control strategy adopted.

Temperature Control Characteristics Analysis of Lead-Cooled Fast Reactor with Natural Circulation

A Combined Analytical, Experimental and Simulation Investigation on LBE Natural Circulation Flow and Heat Transmission

Coolant Temperature Control Oriented Transfer Function Modeling of Lead-based Cooled Fast Reactor Thermal-hydraulic System

Dynamic Modeling and Reactor Power Control of a Natural Circulation Pool-Type Lead-Cooled Fast Reactor

Transient thermal hydraulic analysis of a small passive lead–bismuth eutectic cooled fast reactor

Code Development on Steady-State Thermal-Hydraulic for Small Modular Natural Circulation Lead-Based Fast Reactor

Electromagnetic Field and Temperature Field Analysis of Coil Type Lead-Bismuth Electromagnetic Flowmeter

Modeling and Control Strategy of the China LBE Cooled Fast Reactor

Core design and reactivity control optimization of small lead-cooled reactor LFR-180

Natural circulation with LBE as a working substance to be published in: Progress in nuclear energy

Thermal-hydraulic Analysis of a Full-Scale Lead-Bismuth Cooled Fast Reactor Core Considering Inter-Wrapper Flow

CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

Study on Flow Characteristics in LBE-cooled Main Coolant Pump under Positive Rotating Condition

Numerical simulation on the thermal stratification in the lead pool of lead-cooled fast reactor (LFR)

Dynamic model for control system design and simulation of a low temperature nuclear reactor

Study on the Hydraulic Performance of the Axial Flow Main Coolant Pump for Lead-Cooled Fast Reactor

Preliminary Investigation of THFR Passive Residual Heat Removal System

Lead Cooled Fast Reactor Core Physics Parameters Calculation Based on Monte Carlo Method

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Code Development and Preliminary Validation for Lead-Cooled Fast Reactor Thermal-Hydraulic Transient Behavior

Coupling of Neutronics and Thermal-Hydraulics Codes for the Simulation of Reactivity Insertion Accident for LFR