Preparation of U 3 O 8 by calcination from ammonium uranyl carbonate in microwave fields: Process optimization

bingguo liu,jinhui peng,c srinivasakannan,libo zhang,jinming hu,shenghui guo,dongcheng kong

DOI: https://doi.org/10.1016/j.anucene.2015.07.004

IF: 1.9

2015-01-01

Annals of Nuclear Energy

Abstract:•The U3O8 was prepared first from ammonium uranyl carbonate using microwave.•A quadratic model was developed to optimize the process conditions.

What problem does this paper attempt to address?

Technology to prepare for U3O8 by calcinations from ammonium diuranate in microwave fields

Bingguo Liu,Jinhui Peng,Daifu Huang,Libo Zhang,JinMing Hu,Zebiao Zhang,Dong Cheng Kong,Shenghui Guo,Chun Xiang Li

2011-01-01

Abstract:Base on the temperature rise characteristics, the technology to prepare for U3O8 by calcinations from ammonium diuranate was optimized in microwave fields. The effects of microwave heating power, heating time, and mass of sample on the contents of total uranium and U4+ in U3O8 were investigated. The results show that microwave heating power and heating time significantly affect the contents of total uranium and U4+ in U3O8. The optimal calcination conditions in range of experiments are as follows: Microwave heating power is 700 W, heating time is 10 min and mass is 60 g. Under these conditions the contents of total uranium and U4+ in U3O8 are 84.62% and 28.74%, respectively. The quality of products meets the demand of next procedure. It is feasible to prepare for U3O8 by calcination from the ammonium diurante in microwave fields.
Technology to Prepare for U_3O_8 by Calcinations From Ammonium Diuranate in Microwave Fields

LIU Bing-guo,PENG Jin-hui,HUANG Dai-fu,ZHANG Li-bo,HU Jin-ming,ZHANG Ze-biao,KONG Dong-cheng,GUO Sheng-hui,LI Chun-xiang

2011-01-01

Abstract:Base on the temperature rise characteristics,the technology to prepare for U3O8 by calcinations from ammonium diuranate was optimized in microwave fields.The effects of microwave heating power,heating time,and mass of sample on the contents of total uranium and U4+ in U3O8 were investigated.The results show that microwave heating power and heating time significantly affect the contents of total uranium and U4+ in U3O8.The optimal calcination conditions in range of experiments are as follows: Microwave heating power is 700 W,heating time is 10 min and mass is 60 g.Under these conditions the contents of total uranium and U4+ in U3O8 are 84.62% and 28.74%,respectively.The quality of products meets the demand of next procedure.It is feasible to prepare for U3O8 by calcination from the ammonium diurante in microwave fields.
Preparation of U3O8 by Calcination from Ammonium Uranyl Carbonate Using Response Surface Methodology: Process Optimization

Bing Liu Guo,Jin Peng Hui,Li Zhang Bo,C. Srinivasakannan,Jin Hu Ming,Sheng Guo Hui

DOI: https://doi.org/10.30492/ijcce.2017.28703

2017-01-01

Abstract:The parameters to prepare U3O8 by calcination from ammonium uranyl carbonate were optimized by using response surface methodology. A quadratic equation model for the value of total uranium and U4+ of triuranium octaoxide was built and the effects of main factors and their corresponding relationships were obtained. The statistical analysis of the results indicated that the value of total uranium and U4+ of triuranium octaoxide was significantly affected by the calcination temperature and calcination time in this study range. The optimized calcination conditions were determined as follows: the calcination temperature961.6 K, the calcination time 27.9 min, and the mass of material 37.86 g, respectively. Under these conditions, the value of total uranium and U4+ of triuranium octaoxide was 84.29% and 28.14%. The validity of the model was confirmed experimentally and the results were satisfactory.
U3O8 Acid-Deficient Dissolution Process for Preparation of UO2 Kernels by Sol-Gel Method

HAO Shao-chang,ZHOU Xiang-wen,ZHAO Xing-yu,MA Jing-tao,WANG Yang,DENG Chang-sheng,TANG Ya-ping

DOI: https://doi.org/10.7538/yzk.2013.47.01.0034

2013-01-01

Abstract:Uranyl nitrate solution with high uranium concentration and hypostoichiometric c(NO3)/c(U)r atio( the stoichiometric ratio of c(NO3)/c(U) is 2in standard uranyl nitrate solution) is crucial for preparation of qualified UO2 kernels for high temperature gas-cooled reactor.An acid-deficient dissolution process was developed for the preparation of uranyl nitrate solution.In the process the raw materials U3O8 was added stepwise and the heating for the process was controlled in stages.Uranyl nitrate solutions with c(U)=2.1-2.5mol /L,c(NO3)/c(U)=1.6-1.8and pH1.4could be prepared.A relationship between solution density and uranium concentration was summarized.
Preparation of Low-Temperature Sintered UO2 Nanomaterials by Radiolytic Reduction of Ammonium Uranyl Tricarbonate

Yongming Wang,Qingde Chen,Xinghai Shen

DOI: https://doi.org/10.1016/j.jnucmat.2016.07.003

IF: 3.555

2016-01-01

Journal of Nuclear Materials

Abstract:UO2 nanoparticles were successfully obtained from ammonium uranyl tricarbonate with high efficiency by gamma-irradiation. More importantly, the as-prepared nanoparticles were stable in the irradiated mother solution exposed to air atmosphere. The purified UO2 powders could be sintered at 450-600 degrees C, much ;lower than the reported values (above 1700 degrees C) of bulk UO2. These advantages made this method promising in the production of UO2 nuclear fuels. (C) 2016 Elsevier B.V. All rights reserved.
Uranyl ammonium carbonate precipitation and conversion into triuranium octaoxide

Nguyen Trong Hung,Le Ba Thuan,Nguyen Thanh Thuy,Hoang Sy Than,Dinh Van Phuc,Jin-Young Lee,Rajesh Kumar Jyothi

DOI: https://doi.org/10.1016/j.heliyon.2024.e25930

IF: 3.776

2024-02-10

Heliyon

Abstract:Uranyl ammonium carbonate (AUC), with the chemical formula UO2CO3·2(NH4)2CO3, plays a crucial role in the wet conversion of uranium hexafluoride (UF6) into uranium dioxide (UO2) or triuranium octaoxide (U3O8) for nuclear fuel production, and is used in commercial and research reactors. In this study, the precipitation of AUC from uranyl fluoride (UO2F2) solution and its subsequent conversion into U3O8 powder were investigated. AUC precipitation was performed at uranium concentrations in UO2F2 solution of 80-120 gL-1, ammonium carbonate (NH4)2CO3 concentrations of 200-400 gL-1, and (NH4)2CO3 to U (C/U) ratios of 5-9. The conversion of AUC into U3O8 powder was studied and sintering of the U3O8 nuclear material derived from ammonium uranyl carbonate (ex-AUC U3O8) was conducted at temperatures of 1000-1800 °C. The kinetics of AUC precipitation from the UO2F2 solution were studied using fundamental kinetic equations, and the kinetics of AUC conversion into UO3 were examined using an isoconversion method based on the thermogravimetric analysis of AUC. The final product of U3O8 nuclear material was characterized using typical techniques, such as thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy. This study provides valuable insights into the production and characterization of AUC and U3O8 nuclear materials, which are key materials in the nuclear fuel industry.
Temperature Rising Characteristics of Ammonium Diurante in Microwave Fields

Liu Bing-guo,Peng Jin-Hui,Huang Dai-fu,Zhang Li-bo,Hu Jin-ming,Zhuang Ze-biao,Kong Dong-cheng,Guo Sheng-hui,Li Chun-xiang,Zhang Shi-ming,Xiao Shao-hua

DOI: https://doi.org/10.1016/j.nucengdes.2010.06.033

IF: 1.7

2010-01-01

Nuclear Engineering and Design

Abstract:The temperature rising characteristics of ammonium diurante, triuranium octaoxide (U3O8), and their mixture were investigated under microwave irradiation, aiming at exploring newly theoretical foundation for advanced metallurgical methods. The temperature rising curves showed that ammonium diurante had weak capability to absorb microwave energy, while triuranium octaoxide had the very strong absorption capability. The temperature of mixture containing 20% of U3O8 could rise from room temperature to 1171K within 280s. The ability to absorb microwave energy for the mixture with different ratios increased with the increase in the amount of U3O8. These are in good agreement with the results of Maxwell-Garnett effective medium theory. It is feasible to calcine ammonium diurante by adding of small amounts of U3O8 in microwave fields.
Preparation of Nano-Kaolinite by Microwave-Assisted Chemical Reaction

Hao Luo

2006-01-01

Abstract:In order to enhance the surface area, hole density and adsorption quantity of kaolinite, the authors carried out dispersion treatment of the sheet-like kaolinite after delamination and shattering based on the preparation of urea-kaolinite complex by microwave chemical reaction under further radiation. As a result, nano-kaolinite was obtained. The structures of the samples under processing were studied by Fourier transformation infrared spectrometry (FT-IR) and X-ray diffraction (XRD). The morphologies and sizes of the samples were examined by scanning electronic microscopy (SEM) and transmission electronic microscopy (TEM). The results show that, under the same condition, the time spent on delamination under microwave assistance is only 1/20 of the time spent on the single mechanical method, and that the average size of the nano kaolinite is 150 nm.
Preparation and characterization of micro-spherical ruthenium particles using spray drying combined with microwave calcination of ammonium hexachlororuthenate (IV)

Gong Siyu,Dong Xizhi,Zhang Ting,Niu Yifan,Hou Keren,Chen Wang,An Yunfei,Liu Bingguo

DOI: https://doi.org/10.1016/j.ijrmhm.2023.106276

IF: 4.804

2023-06-03

International Journal of Refractory Metals and Hard Materials

Abstract:The quality of ruthenium (Ru) powders has a direct impact on the performance of sputtering Ru targets. This study employed spray granulation coupled with microwave calcination to prepare high-sphericity and uniform particle size Ru powders using ammonium hexachlororuthenate (IV) (AH). Spray granulation was applied to prepare AH powders with uniform particle size, high sphericity, and great dispersibility. , prepared by blending spherical AH powders and near-spherical Ru powders generated by microwave calcination at a mass ratio of 9:1, absorbs more microwaves than AH, which is promising for preparing Ru powders with faster and greater production than AH by microwave calcination. The response surface methodology (RSM) based on central composite design (CCD) was used to optimize the process of microwave calcination in accordance with the thermal decomposition and self-reduction mechanism of AH. Three parallel verification experiments were performed under optimal microwave conditions (heating time 68.00 min, heating temperature 500 °C, and material mass 28 g), and the products were collected and characterized. The results show that the response surface model is accurate, and near-spherical Ru powder with high morphology was obtained after spray granulation and microwave calcination This work is anticipated to produce Ru powders that could be used as a sputtering target in industry, as well as other high-performance metal powders.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Wet Process of External Gelation of Uranium for Preparation of Uranium Dioxide Kernel of High Temperature Gas-cooled Reactors

ZHOU Xiang-wen,HAO Shao-chang,ZHAO Xing-yu,MA Jing-tao,WANG Yang,DENG Chang-sheng

DOI: https://doi.org/10.3969/j.issn.0258-0926.2012.04.011

2012-01-01

Abstract:In order to prepare the dense uranium dioxide(UO2) kernel for high temperature gas-cooled reactors(HTGR) fuel,the conventional sol-gel processes are optimized and modified.The wet process of modified external gelation of uranium(EGU) is introduced,which includes the dissolution of U3O8,i.e.the preparation of acid-deficiency uranyl nitrate,preparation of broth solution,casting and gelation of broth solution and aging,washing and drying of the gelled spheres,and etc.The mechanism of wet process of EGU is also discussed.With the optimized wet process,the ammonium diuranate(ADU) microspheres with good sphericity,uniform diameter and perfect porous structure are prepared.After the subsequent treatments of dry processes such as calcination,reduction and sintering,the eligible dense UO2 kernels for HTGR fuel are manufactured.
Preparing Uo2 Kernels by Gelcasting

Guo Wenli,Liang Tongxiang,Zhao Xingyu,Hao Shaochang,Li Chengliang

DOI: https://doi.org/10.13538/j.1001-8042/nst.20.124-128

2013-01-01

Abstract:A process named gel-casting has been developed for the production of dense UO2 kernels for the high-temperature gas-cooled reactor. Compared with the sol-gel process, the green microspheres can be got by dispersing the U3O8 slurry in gelcasting process, which means that gelcasting is a more facilitative process with less waste in fabricating UO2 kernels. The UO2 kernels with the size of 500 mu m, O/U <= 2.01, density of 10.70 g.cm(-3) were obtained by gel-casting process followed by heat treatment.
Comparative Studies on the Dissolution of Ceramic UO2 Pellets in Nitric Acid by Microwave and Conventional Heating

Yunfeng Zhao,Jing Chen

DOI: https://doi.org/10.1524/ract.2008.1507

2008-01-01

Radiochimica Acta

Abstract:Summary The dissolution data of UO2 are important to develop the new process of uranium ore leaching and new head-end reprocessing of spent nuclear fuel. The dissolution experiments of UO2 pellets in 8 M nitric acid by microwave heating and conventional heating were carried out respectively in the present work. Compared with the conventional heating, the microwave heating can remarkably promote the dissolution process of UO2 pellets with a dissolution ratio increase of 26%–46%. The kinetics results show that the dissolution processes by microwave heating and conventional heating match well with the diffusion control model and the surface reaction control model, respectively.
Preparation of UCO Microspheres by Internal Gelation Process

Xing Yu Zhao,Jing Tao Ma,Yong Gao,Shao Chang Hao,Chang Sheng Deng,Bing Liu,Ya Ping Tang

DOI: https://doi.org/10.4028/www.scientific.net/KEM.697.831

2016-01-01

Rare Metal Materials and Engineering

Abstract:UO2 microspheres with diameter similar to 650 mu m were prepared by internal gelation process through dissolving, broth solution preparation, dispersing, AWD (aging, washing and drying), calcination, reducing and sintering procedures. The broth solution viscosity changing with standing time at different temperatures was measured by rotary viscosimeter to study the broth solution stability. Effects of the composition, pH value, uranium and HMTA-Urea concentration of broth solution on the microstructure and performance of microspheres were also studied. Surface appearance of dried particles was observed by integrated microscope. Grain size and the degree of densification of UO2 microspheres were observed by SEM. The broth solution stabilization time at different temperatures and the UO2 microspheres with good apparent morphology have been obtained. Finally, the stable internal gelation technology for UO2 microspheres preparation has been researched.
Preparation of CuO Nanoparticles by Microwave Irradiation

H Wang,JZ Xu,JJ Zhu,HY Chen

DOI: https://doi.org/10.1016/s0022-0248(02)01571-3

IF: 1.8

2002-01-01

Journal of Crystal Growth

Abstract:CuO nanoparticles with an average size of ca. 4nm have been successfully prepared by microwave irradiation, using copper (II) acetate and sodium hydroxide as the starting materials and ethanol as the solvent. The CuO nanoparticles are characterized by using techniques such as X-ray powder diffraction, transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy and UV–Visible absorption spectroscopy. The as-prepared CuO nanoparticles have regular shape, narrow size distribution and high purity. The band gap is estimated to be 2.43eV according to the results of the optical measurements of the CuO nanoparticles.
Synthesis of CuO Nanoparticles by Microwave Irradiation

Yang Han-min

Abstract:Using Cu(Ac)2 as precursor,CuO nanoparticles were prepared under microwave irradiation.The CuO nanoparticles were studied by using TEM,XRD analyzer.The results showed that CuO nanoparticles with good dispersibility were synthesized via the novel method mentioned above.Microwave(MW) heating was a rapid and effective way to prepare CuO nanoparticles.The morphology of CuO nanoparticles varied with different solvent and complex.PVP(Polyvinylpyrrolidone) was benefit to the dispersing and stablizion of CuO nanoparticles in solvent.

Chemistry,Materials Science
Aging, Washing and Drying Processes of UO2 Gelled Spheres

Zhao Xingyu,Ma Jingtao,Hao Shaochang,Wang Yang,Zhou Xiangwen,Deng Changsheng

2013-01-01

Rare Metal Materials and Engineering

Abstract:The aging, washing and drying processes are in sequence accomplished in one device which is suitable for the batched preparation of UO2 gelled spheres (similar to 3 kgU/batch), and also can be used in large-scale production. The inside and outside gelation of gelled spheres are complete and uniform through pre-aging process and heating rate controlling. Temperature of deionized water and frequency of lavation are controlled in washing to avoid cracking and decrease liquid waste. The vacuum degree and temperature in drying process have been adjusted to avoid cracking and make drying uniformly. The NO3- content variation with time in aging solution and the content in washing solution have been measured by potassium dichromate titrimetric analysis, and then the processes whether finished to be determined. Batches of verification test are smooth-going using the AWD process, and the UO2 kernels satisfied design requirements have been prepared finally.
Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Zhixing Wang,Haipeng Chen,Xiao Han,Lihua Gao,Wenlong Zhan,Junhong Zhang,Zhijun He

DOI: https://doi.org/10.1016/j.apt.2023.104040

IF: 4.969

2023-01-01

Advanced Powder Technology

Abstract:An innovative and effective technological process is proposed to synthetize spinel manganese ferrite (MnFe2O4) by a microwave-assisted oxidization roasting process. In the current paper, the effect of operating variables on the formation mechanism of Fe-MnO systems for synthesizing spinel MnFe2O4 is initially investigated to reveal the oxidation mechanism and phase transformation during the micro-wave-assisted oxidative roasting process. The synthetic MnFe2O4 microparticles with a saturation mag-netization (Ms) of 70.5 emu/g, a coercivity (Hc) of 4.65 Oe and a ratio of the saturation magnetization to remanent magnetization (Ms/Mr) of 0.055 were successfully prepared by heating for 30 min at 1000 degrees C in an air atmosphere. The MnFe2O4 samples exhibited normal and inverse spinel crystal structures, inevita-bly coexisting and co-transforming simultaneously at high temperature (>= 950 degrees C). Furthermore, this innovative and effective technological process can be extended to fabricate other spinel ferrite particles of interest. (c) 2023 Published by Elsevier B.V. on behalf of The Society of Powder Technology Japan. All rights reserved.
Studies on the dissolution kinetics of ceramic uranium dioxide particles in nitric acid by microwave heating

Yunfeng Zhao,Jing Chen

DOI: https://doi.org/10.1016/j.jnucmat.2007.03.271

IF: 3.555

2008-01-01

Journal of Nuclear Materials

Abstract:The kinetics of dissolution of uranium dioxide particles in 4–8M (M=mol/L) nitric acid by microwave heating has been studied. It is supposed that the UO2 particles dissolve homogeneously in the form of spherical particles. The dissolution process can be dealt with the well-known shrinking core model. The results show that under the 600W microwave field, the dissolution of UO2 particles is controlled by the product layer diffusion at the temperature of 90–110°C. The average activation energy for the dissolution of UO2 particles in 4–8M nitric acid was calculated to be 73.2±1.8kJ/mol from Arrhenius plots.
One-step Synthesis of Hollow UO 2 Nanospheres Via Radiolytic Reduction of Ammonium Uranyl Tricarbonate

Yong-Ming Wang,Qing-De Chen,Xing-Hai Shen

DOI: https://doi.org/10.1016/j.cclet.2016.06.035

IF: 9.1

2016-01-01

Chinese Chemical Letters

Abstract:Black precipitates were successfully obtained by radiolytic reduction of ammonium uranyl tricarbonate in the aqueous solution of HCOONH4 by one step. TEM, SAED, EDS, and XRD analysis indicated that the precipitates consist of hollow UO2 nanospheres (Phi: 30-50 nm, wall thickness: 8-15 nm, and cavity diameter: 10-20 nm). The effect of HCOONH4 concentration, irradiation time and dose rate on the morphology, and size of nanospheres was investigated. Then, a gas-bubble template mechanism was proposed. (C) 2016 Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. Published by Elsevier By. All rights reserved.
Preparation of α-Al2O3 by low-temperature calcining γ-Al2O3 with α-phase seed in-situ obtained by ball milling

Jianhui Su,Yan Liu,Xiujing Peng,Guoxin Sun,Xuchuan Jiang

DOI: https://doi.org/10.1016/j.mtcomm.2023.106681

IF: 3.8

2023-08-01

Materials Today Communications

Abstract:Due to the high activation energy barrier and the sporadic nature of nucleation, the temperature required for the transition from cubic dense γ-Al2O3 to tripartite α-Al2O3 is as high as 1100–1200 °C. In this work, a two-step strategy was employed to reduce the phase transformation temperature, and prepare α-Al2O3 particles with good dispersion. As the first step, 10 nm sheet γ-Al2O3 was obtained by ammonium aluminum carbonate (AACH) decomposition, which was more favorable to the crystal transformation in the next ball-milling processing. In the second step, γ-Al2O3 powder with partial α-Al2O3 produced in situ by ball-milling γ-Al2O3 was calcined, and α-Al2O3 nanoparticles were obtained at just 850 °C. The content of the α-Al2O3 is determined by the Rietveld Refine method. The relationship between ball-milling time and α-Al2O3 content was clarified, and the effect of α-Al2O3 content on the transformation temperature and morphology of γ-Al2O3 was discussed. The results showed that the α-Al2O3 content rises with the increase of ball milling time, and spherical α-Al2O3 nanoparticles can be obtained when the α-Al2O3 content is 5 %. The addition of α-Al2O3 seeds reduces the phase transition temperature but agglomeration exists. Our proposed two-step low-temperature calcination strategy is an important method for the preparation of alumina nanoparticles

materials science, multidisciplinary

Preparation of U 3 O 8 by calcination from ammonium uranyl carbonate in microwave fields: Process optimization

Technology to prepare for U3O8 by calcinations from ammonium diuranate in microwave fields

Technology to Prepare for U_3O_8 by Calcinations From Ammonium Diuranate in Microwave Fields

Preparation of U3O8 by Calcination from Ammonium Uranyl Carbonate Using Response Surface Methodology: Process Optimization

U3O8 Acid-Deficient Dissolution Process for Preparation of UO2 Kernels by Sol-Gel Method

Preparation of Low-Temperature Sintered UO2 Nanomaterials by Radiolytic Reduction of Ammonium Uranyl Tricarbonate

Uranyl ammonium carbonate precipitation and conversion into triuranium octaoxide

Temperature Rising Characteristics of Ammonium Diurante in Microwave Fields

Preparation of Nano-Kaolinite by Microwave-Assisted Chemical Reaction

Preparation and characterization of micro-spherical ruthenium particles using spray drying combined with microwave calcination of ammonium hexachlororuthenate (IV)

Wet Process of External Gelation of Uranium for Preparation of Uranium Dioxide Kernel of High Temperature Gas-cooled Reactors

Preparing Uo2 Kernels by Gelcasting

Comparative Studies on the Dissolution of Ceramic UO2 Pellets in Nitric Acid by Microwave and Conventional Heating

Preparation of UCO Microspheres by Internal Gelation Process

Preparation of CuO Nanoparticles by Microwave Irradiation

Synthesis of CuO Nanoparticles by Microwave Irradiation

Aging, Washing and Drying Processes of UO2 Gelled Spheres

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Studies on the dissolution kinetics of ceramic uranium dioxide particles in nitric acid by microwave heating

One-step Synthesis of Hollow UO 2 Nanospheres Via Radiolytic Reduction of Ammonium Uranyl Tricarbonate

Preparation of α-Al2O3 by low-temperature calcining γ-Al2O3 with α-phase seed in-situ obtained by ball milling