Abstract:In recent years, the molten salt reactor (MSR) has attracted increasing attention and become one of the most important "Generation IV reactor" designs. In particular, the fact that molten fluoride salts are utilized as liquid fuel and coolant constitutes the main feature of the reactor. Furthermore, since the molten fluoride salt has a high Prandtl number and contains quite different behaviors to those of ordinary water and gas, an in-depth investigation of molten fluoride salt is thus highly demanded. Hence, it is the central objective of this study to examine the thermal-hydraulic characteristics of molten salt especially for the optimal design of reactor core and its safety operation. In this study, the dependence of pressure drop, Nusselt number and entrance length on the inlet Reynolds number for a molten fluoride salt (LiF(46.5)-NaF(11.5)-KF(42)) are computed using a comprehensive computational fluid dynamics (CFD) methodology. The methodology employs the continuity equation, momentum equation, energy equation, and standard k-ε turbulence model to conduct fluid dynamics simulation. For simplicity, the geometry employed in this study is a circular tube. The simulated results indicated that the pressure drop and Nusselt number and entrance length increase as the inlet Reynolds number increases. And the computed pressure drop corresponds well to theoretical value. It is also given a new correlation of computed entrance length in this paper. In addition, two well-known Nusselt number correlations such as, Hausen, Gnielinski, are employed to make comparisons with the computed results. It is also found that the computed Nusselt numbers overestimate the Hausen ones in the high Reynolds number region. However, the computed Nusselt numbers correspond well to the Gnielinski ones in all the Reynolds numbers region. Also notice that an experimental setup is currently in progress in order to validate the present CFD simulation.

Improved Resonance Calculation of Fluoride Salt-Cooled High-Temperature Reactor Based on Subgroup Method

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Improvements of subgroup method based on fine group slowing-down calculation for resonance self-shielding treatment

Study on tritium transport characteristics in fluoride-salt-cooled high-temperature advanced reactor

Resonance Calculation of FCM Fuel Based on the Global-Local Method

A Combined Method to Evaluate the Resonance Self Shielding Effect in Power Fast Reactor Fuel Assembly Calculation

Application of the Discontinuity Factor Theory to Accelerate Routine Rod Worth Calculations for Modular HTRs

Pin-resolved ultra-fine-group with correction method and its application to plate-type fuel reactor analysis

Analysis of the fine-mesh subgroup method and its feasible improvement

Research on the Induced Radioactivity of HTR-PM’s Reactor Pressure Vessel: A Comparative Study Between FLUKA, KORIGEN and QAD-CGA

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

RFP-MSR Hybrid Reactor Model for Tritium Breeding and Actinides Transmutation †

Resonance Treatment of Double-Heterogeneous Fuel Using a Deterministic Statistical Geometry Method in Heterogeneous Transport Calculation Code GALAXY-Z

THE STUDY OF SEPARATED FUNCTION RFQ (SFRFQ) WITH DIAPHRAGMS

Analysis of Categorical Subgroup Method for Resonance Self-Shielding Treatment

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

ICONE19-43445 Investigating Thermal-Hydraulic Characteristic of Molten Fluoride Salt in A Circular Pipe Using A CFD Methodology

Numerical Investigations of Molten Salt Pump Journal Bearings Under Hydrodynamic Lubrication Conditions for FHRs