Abstract:Dry reforming of methane (DRM) is an effective method for achieving carbon reduction and carbon neutrality by directly converting two greenhouse gases, CH 4 and CO 2 , into value-added products. However, catalysts used in this process are prone to metal sintering and carbon deposition, which are major obstacles. Thus, the design of high-performance catalysts is crucial for the success of dry reforming technology. In this paper, a series of Co-based catalysts modified with different rare earth metals (Y, Tb, Gd) and γ-Al 2 O 3 as the support were prepared using the conventional co-impregnation method. The effects of the introduction of rare earth metals additives on the activity and resistance to carbon build-up of the catalysts were investigated. The catalysts were analyzed using various characterization techniques. The results showed that Y and Tb as additives could effectively improve the activity and stability of the catalyst. However, the Gd modified Co-based catalyst had a large specific surface area but was less favorable for the DRM reaction. The best performance catalyst was achieved with the 10Co–5Y/γ-Al 2 O 3 under 750 °C with CH 4 and CO 2 conversions of 91.79% and 98.33%, respectively. This is mainly due to the fact that the introduction of Y enhances the electron transfer between Co and metal oxides, generating more oxygen vacancies and base vacancies on the surface, thus enhancing the adsorption and activation of CO 2 . The 10Co–5Y/γ-Al 2 O 3 catalyst demonstrated excellent DRM performance even after 20 h at 750 °C. Moreover, we proposed a hypothesis regarding the mechanism of resistance to carbon build-up. This study provides a reasonable idea to design Co-based catalysts with resistance to sintering and carbon accumulation to improve the performance of reforming catalysts.

Tuning the metal-support interaction in catalysts for highly efficient methane dry reforming reaction

Enhanced Catalytic Performance of Ir Catalysts Supported on Ceria-Based Solid Solutions for Methane Dry Reforming Reaction

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Operando induced strong metal-support interaction of Rh/CeO2 catalyst in dry reforming of methane

Thermally stable Ir/Ce 0.9 La 0.1 O 2 catalyst for high temperature methane dry reforming reaction

Performance enhancement of methane dry reforming reaction for syngas production over Ir/Ce0.9La0.1O2-nanorods catalysts

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Co-loading Pd and CeO2 on Silicalite-1 As High-performance Catalyst for Methane Dry Reforming Reaction

Tuning Pd species via electronic metal-support interaction for methane combustion

Precisely constructing Ce-loaded sulfur resistant catalyst for efficient methane dry reforming

Theoretical study of the mechanism of dry reforming of methane over Pd-doped CeO 2 supported-Ru catalyst: The importance of oxygen self-spillover behavior

Enhanced activity and stability of Ce-doped PrCrO3-supported nickel catalyst for dry reforming of methane

Synergistic Pt-CeO2 interface boosting low temperature dry reforming of methane

Highly efficient and stable Ni/CeO2-SiO2 catalyst for dry reforming of methane: Effect of interfacial structure of Ni/CeO2 on SiO2

Light-Reinforced Key Intermediate for Anticoking To Boost Highly Durable Methane Dry Reforming over Single Atom Ni Active Sites on CeO 2

Strong Metal-Support Interactions Between Highly Dispersed Cu+ Species and Ceria Via Mix-Mof Pyrolysis Toward Promoted Water-Gas Shift Reaction

Exploring the role of promoters (Y, Tb and Gd) in the performance of Co-based catalyst for dry reforming of methane

Engineering of Surface Properties of Ni-CeZrAl Catalysts for Dry Reforming of Methane

Unraveling the effects of Ce/Zr molar ratio in mesoporous CexZr1−xO2 on the performance of dry reforming of methane over the supported Ni catalysts

Methane Dry Reforming over Ni/NiO Supported on Ce-, Zr-, and Al-Modified Y2O3 for Hydrogen Production

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane