Abstract:The La0.6Sr0.4Co0.8Fe0.2O3-delta(LSCF)-Ce0.8Sm0.2O1.9(SDC) composite cathode for solid oxide fuel cells (SOFCs) based on SDC electrolyte, followed by being calcined at 1073 K, 1173 K, 1273 K, 1373 K and 1473 K, was prepared by infiltration of LSCF precursor solution into porous SDC scaffolds. The average LSCF particle size is about 50 nm, 0.1 mu m, 0.15 mu m,0.2 mu m and 1.2 mu m respectively after being calcined at 1073 K, 1173 K, 1273 K, 1373 K and 1473 K for 4 h. The oxygen reduction reaction mechanism in the porous LSCF-SDC nano sized composite cathode is studied through a comparison with that in the porous LSCF-SDC micro-size composite cathode. The oxygen reduction reaction mechanism in the LSCF-SDC composite cathodes is discussed in terms of frequency response, electrode resistance and reaction order at different oxygen partial pressures p(O-2). Three elementary steps are considered to be involved in the cathode reaction: (i) Dissociation of molecular adsorbed oxygen into atom adsorbed oxygen on cathode surface; (ii) Bulk diffusion of adsorbed of O2- in the bulk LSCF phase; (iii) Oxygen ions transfer at the interface between the cathode and the electrolyte. For the cathodes sintered at 1073 K and 1173 K, the polar resistance in the medium frequency range was dominant and step (ii) is the rate determining step. The low frequency arc became obvious in the impedance spectra with increasing the calcination temperature of the LSCF precursors. The ratio of the polar resistance in the medium frequency range to the total cathode polar resistance decreases with increasing the calcination temperature, from 70.6% at 1073 K to 29.6% at 1473 K, but the ratio of the polar resistance in the low frequency range to the total cathode polar resistance increases with increasing the calcination temperature, from 4.9% at 1073 K to 58% at 1473 K, implying that the cathode process is limited by step (iii) when the cathode calcination temperature is at 1473 K. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Effects of oxygen partial pressure on the performance stability of impregnated La0.6Sr0.4Co0.2Fe0.8O3−δ–Sm0.2Ce0.8O2 cathodes of solid oxide fuel cells

Effects Of Oxygen Partial Pressure On The Performance Stability Of Impregnated La0.6sr0.4co0.2fe0.8o3-Delta-Sm0.2ce0.8o2 Cathodes Of Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Performance Stability and Degradation Mechanism of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ Cathodes under Solid Oxide Fuel Cells Operation Conditions

Long-term Stability of Infiltrated La0.8Sr0.2CoO3−, La0.58Sr0.4Co0.2Fe0.8O3− and SmBa0.5Sr0.5Co2.0O5+ Cathodes for Low Temperature Solid Oxide Fuel Cells

Preparation and Oxygen-reduction Mechanism Investigation of Nanostructure LSCF-SDC Composite Cathodes

Effects of Impregnating Palladium on Catalytic Performance of Lscf-Gdc Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

An Investigation of Oxygen Reduction Mechanism in Nano-Sized LSCF-SDC Composite Cathodes

Influence of CO2 on the Cathode Performance and Stability of La1-XSrxCo0.2Fe0.8O3-Î´ in Solid Oxide Fuel Cells

Performance of PrBaCo2O5+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3−δ composites as potential cathode materials for solid oxide fuel cells

A high performance intermediate-temperature solid oxide fuel cell using impregnated La0.6Sr0.4CoO3−δ cathode

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

Effects of doped ceria conductivity on the performance of La 0.6Sr 0.4Co 0.2Fe 0.8O 3-δ cathode for solid oxide fuel cell

Effect of Infiltration Ce0.8Sm0.2O1.9 Against Double Perovskite Performance LaBa0.5Sr0.5Co2O5+δ as IT-SOFC Cathode

Effect of Carbon Dioxide on the Cathodic Performance of Solid Oxide Fuel Cells

Effect of Pd doping on the activity and stability of directly assembled La0.95Co0.19Fe0.76Pd0.05O3-δ cathodes of solid oxide fuel cells

Electrochemical Characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ–Sm0.2Ce0.8O1.9 Composite Materials for Low-Temperature Solid Oxide Fuel Cell Cathodes

Performance Degradation of Impregnated La0.6Sr0.4Co0.2Fe0.8O3+Y2O3 Stabilized ZrO2 Composite Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Effect of Sdc-Impregnated Lsm Cathodes on the Performance of Anode-Supported Ysz Films for Sofcs

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Development of La0.6Sr0.4Co0.2Fe0.8O3−δ Cathode with an Improved Stability Via La0.8Sr0.2MnO3-film Impregnation