Abstract:Poly (vinyl alcohol)/layered double hydroxide (PVA/LDH) composite films with different LDH contents have been fabricated through casting with an in situ hydrothermal treatment. Wide angle X-ray diffraction WAXD) results show the characteristic (003) diffraction reflection peak of LDH layers and the corresponding peak becomes stronger with the increase of LDH content, and the size of LDH layers can be tuned by the concentration of reactant. Lower reactant concentration leads to small size of LDH particles while higher concentration gives LDH particles with large size. LDH particles are homogeneously dispersed in PVA matrix as evidenced by SEM observations. The tensile strength and the elastic modulus of PVA films are improved by introducing LDH particles. With the LDH content of 1. 0 wt%, the tensile strength and elastic modulus of the corresponding composite films are improved by about 105. 4% and 133. 2%, respectively, compared with those of a neat PVA film. It is believed that most OH groups of PVA undergo interfacial H-bonding with the LDH layers and other PVA chains,which might be account for the improvement of mechanical properties. Interesting thing is that the in situ PVA/LDH composite aqueous solution shows lower viscosity than that of PVA aqueous solution and the viscosity decreases with LDH content, which is in strong contrast to that by traditional simple mixing. LDH layers are considered to shield the entanglement of PVA chains and thus lead to decreasing solution viscosity. Furthermore, the anti-absorbent of water for the composite films are also improved without losing transparency, while the improvement of gas barrier cannot be observed until the loading of LDH reaches to 3. 0 wt%.

Fabrication of High-Performance Poly(Vinyl Alcohol)/Mgal-Layered Double Hydroxide Nanocomposites

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Studies on Poly (vinyl alcohol)/Layered Double Hydroxide in situ Composite Films

Preparation of the poly(vinyl alcohol)/layered double hydroxide nanocomposite

Preparation and characterization of poly(vinyl chloride)/layered double hydroxides nanocomposite viain situ suspension polymerization

Preparation And Characterization Of Poly(Vinyl Chloride)/Layered Double Hydroxides Nanocomposite Via In Situ Suspension Polymerization

Preparation of Poly(Methylmethacrylate)/Layered Double Hydroxides Nanocomposites Via in Situ Solution Polymerization

Tunable Properties of Exfoliated Polyvinylalcohol Nanocomposites by in Situ Coprecipitation of Layered Double Hydroxides

Facile Synthesis of LDH Nanoplates As Reinforcing Agents in PVA Nanocomposites

Improvement of optical, dielectric and mechanical properties of a new nanocomposite based on polyvinyl alcohol and layered double hydroxide

Preparation and proton conductivity of poly(vinylidene fluoride)/layered double hydroxide nanocomposite gel electrolytes

Heterogeneous ultrathin films of poly(vinyl alcohol)/layered double hydroxide and montmorillonite nanosheets via layer-by-layer assembly.

Modification of Poly(vinylidene Fluoride) Gel Electrolyte by Layered Double Hydroxide

Polymer-Layered Double Hydroxide Nanocomposites By Emulsion And Suspension Polymerization

Interaction Between Poly(vinyl Alcohol) and Layered Double Hydroxide (LDH) Particles with Different Topological Shape and Their Application in Electrospinning

Construction of multiple crosslinked networks for the preparation of high-performance lignin-containing cellulose nanofiber reinforced polyvinyl alcohol films

Fabrication and characterization of organically modified layered double hydroxide/poly (lactic acid) nanocomposite by sonication-assisted solution compounding method

Exfoliated Poly(methyl Methacrylate)/mgfe-Layered Double Hydroxide Nanocomposites with Small Inorganic Loading and Enhanced Properties

Preparation of Poly (methyl Methacrylate)/ldh Nanocomposite by Exfoliation-Adsorption Process

Synthesis and modification of the structural, optical, and thermal properties of PVA–PEO by LDH nanoplates

Fabrication of UV- and Heat-Resistant PDLA/PLLA- g -Nanolignin Composite Films by Constructing Interfacial Stereocomplex Crystallites