Abstract:Reversible polycondensation of bis(phenol) silyl ether 1 and bis(4-fluorophenyl) sulfone 2 with an excess of one monomer in the presence of base was investigated for the synthesis of telechelic poly(ether sulfone) (PES) end-capped with the excess monomer, without the formation of cyclic polymer. In the polycondensation of an excess of bisphenol A bis(trimethylsilyl ether) (1a) and 2 in the presence of K2CO3 in N-methyl-2-pyrrolidone (NMP) ([2]0 = 1.0 M) at 145 oC, PES having a phenol moiety derived from 1a at both ends (designated as HO/OH) was obtained. The molecular weight increased up to Mn = 8380 as the excess ratio of 1a was decreased, but the product was contaminated with cyclic polymer; this issue was overcome by increasing the monomer concentration ([2]0 = 4.0 M). On the other hand, in the polycondensation using an excess of 2, CsF was an effective base to obtain PES with a fluorophenyl sulfone moiety at both ends (designated as F/F). The polycondensation using 1.05 equivalents of 2 in N,N-dimethylacetamide (DMAc) ([1a]0 = 4.0 M) at 165 oC afforded high-molecular-weight PES with F/F ends (Mn = 11200), free from cyclic polymer. Furthermore, other compounds 1 were polymerized with 2 under the optimized conditions established for the polycondensation of 1a with 2. The polycondensation of 1.1 equivalents of 1c, having a bis(trifluoromethyl) group, with 1.0 equivalent of 2 afforded PES with HO/OH ends, whereas the polycondensation of 1.0 equivalent of 1b, bearing a cyclohexylidene group, with 1.1 equivalents of 2 afforded PES with F/F ends. In the polycondensation of unsubstituted bisphenol silyl ether 1d with 2, gelation occurred when an excess of either 1d or 2 was used.

Synthesis and characterization of poly(phenylene sulfide ether) by reduction of poly(phenylene sulfoxide ether sulfide ether) precursor

Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability

Synthesis and Characterization of Low‐molecular‐weight Poly(2,6‐dimethyl‐1,4‐phenylene Oxide) in Water

A Novel Synthetic Method for Preparing Poly(2,6-Dimethyl-1,4-phenylene Oxide)/polystyrene Alloy in Reactor Containing Aqueous Medium

Crystallization Behavior of Poly(styrene–ethylene) Copolymers Prepared by Sequential Polymerization

Synthesis and Characterization of Α,ω-Bis(2,6-dimethylphenol)-poly(2,6-dimethyl-1,4-phenylene Oxide) Oligomers in Water and the End-Group Modification

New Evaluation Methods of Average Molecular Weight and the Degree of Branching of Poly(1,4-phenylene sulfide) Samples through Their Partial Sulfonation

Synthesis and Characterization of Thermooxidatively Stable Poly(dimethylsilyleneethynylenephenyleneethynylene) with O-Carborane Units

High Molecular Weight Soybean Oil-based Polyesters through Carboxyl-ester Transesterification

Selective synthesis of cyclic-polymer-free poly(ether sulfone)s with OH ends or F ends by non-stoichiometric, reversible polycondensation

Research on Synthesis of Poly(1, 3-Propanediol-sebacate) Esters Without Catalysts and Their Molecular Weights

Synthesis and characterization of soluble and meltable poly(aminopropyl/phenylsilsesquioxane)

Synthesis and Properties of SEPS-g-PEO Copolymers with Varying Branch Lengths

Synthesis and pyrolysis mechanism of phenolphthalein poly(aryl ether sulfone) containing isopropyl groups

Synthesis of high molecular weight sulfonated poly(arylene ether sulfone) copolymer without azeotropic reaction

One‐pot, one‐step, and selective terpolymerization of ethylene oxide, propylene oxide, and COS to copoly(thioether)s with tunable thermal properties

Synthesis of Monodispersed Telechelic Polyacetylene from Its Precursor

Synthesis of Fluorinated and Hydrocarbon Ester Functionalized Poly(<i>p</i>-phenylenes) and Their Solubility in Supercritical Fluids

Purification method of para-dichlorobenzene for high polymerization degree polyphenylene sulfide synthesis

Preparation and properties of PP/SEBS foam materials

Effect of Modified Sepiolite on Combustion Properties of Polypropylene