Abstract:A novel analytical model development and simulation of melt‐electrospinning process is presented. Unconstrained equations of motion for the description of a discretized melt‐electrospun fiber are formulated using Kane's method. The motions of the spinneret and the collector plate are also incorporated into the kinematics formulation to simulate direct writing and three‐dimensional printing scenarios. Constraints describing viscoelastic joints in the system and the phenomenon of the melt‐electrospun fiber adhering to the collector plate are implemented using the Udwadia Kalaba method. Rotational viscoelastic elements are introduced to mimic the dampening of the whipping motion observed in the unstable region. A novel algorithm is devised to continuously run the simulation with no limit on the total duration and phase transitions. System responses such as fiber diameter, collection size, fiber elongations, and jet speeds are monitored for changes in control parameters including applied voltage, collector distance, and flowrate. The results demonstrate close agreement with experimental observations in the literature. The jet starts relatively straight on the onset of its trajectory and develops subtle whipping motion as it advances toward the collector plate. Reduction in the amplitude of the whipping motion is observed once the free end of the fiber adhered to the collector plate. A novel analytical model development and computer simulation of melt‐electrospinning process is presented. The motions of the spinneret and the collector plate are incorporated into the model to simulate direct writing and 3D printing scenarios. Using Kane's method and Udwadia–Kalaba method, constraint equations describing the viscoelastic joints and the effect of the motions of the collector plate are considered.

A Short Remark on WAN Model for Electrospinning and Bubble Electrospinning and Its Development

Theoretical analysis of unstable segments of electrostatic spinning charged jet

A Short Remark on Electric Current in the Electrospinning Process

Modeling and Simulation of the Electrospinning Jet with Archimedean Spiral

Critical Comparison of Electrostatic Effects on Hydrodynamics and Heat Transfer in a Bubbling Fluidized Bed with a Central Jet

Research progress, models and simulation of electrospinning technology: a review

Asymptotic decay of velocity of whipping jet in electrospinning

Interaction of Multiple Jets in Bubble Electrospinning

Uniform Distribution and Densification of Jets in Needleless Electrospinning Using Annular Tip Nozzle

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

A Novel Theoretical Model Development and Simulation of Melt‐Electrospinning Using Kane's and Udwadia–Kalaba Methods

Non-linear Langevin model for the early-stage dynamics of electrospinning jets

Models of polymer solutions in electrified jets and solution blowing

The role of 3D electrostatic field in modeling the electrospinning process

Investigating the draw ratio and velocity of an electrically charged liquid jet during electrospinning

Advancing Nanofiber Research: Assessing Nonsolvent Contributions to Structure Using Coaxial Electrospinning

Analytical Modelling of Dry-Jet Wet Spinning

A NEW CIRCULAR SPINNERET SYSTEM FOR ELECTROSPINNING Numerical Approach and Electric Field Optimization

A Numerical and Experimental Study on the Effect of the Cone Angle of the Spindle in Murata Vortex Spinning Machine

Electrospinning of Nanofibers: Reinventing the Wheel?

Finite element method assisted design of needleless electrospinning systems for mass production of polymer nanofibers