Abstract:Electrospinning is a manufacturing technique that can produce microfibers and nanofibers from polymeric solutions. It has a broad range of applications in areas such as tissue engineering, flexible electronics, filtering, etc. However, due to its chaotic behavior, the fibers obtained by this process are prone to high diameter variations. The high diameter variations will cause poor final product functionality. The diameter is affected by process variables, ambient conditions and in-situ measurements. It is therefore important to model their effect on the fiber diameter variation, which is rarely investigated in the literature. Towards this end, this paper systematically studies the electrospinning process of a biocompatible polymer (i.e., polyacrylonitrile (PAN) 10%) via experimental study and data-driven modeling. In particular, three critical process variables (i.e., voltage, tip-to-collector distance, and polymer flow rate), are varied in a central composite design of experiment. Twenty-four runs are executed for the data collection, during which the in-situ measurements are collected via a customized sensing system. After each experiment, scanning electron microscope (SEM) images are taken from the nonwoven mats and characterized to capture the diameter and the diameter variations. Three machine learning methods, Lasso, random forest (RF), and support vector machine (SVM), are applied to the collected data. The model performance is evaluated in the real case study on the electrospinning ofpolymeric solution. The most predictive model (RF) can yield an around 15% relative error for prediction in testing data on average over 100 replications.

Asymptotic decay of velocity of whipping jet in electrospinning

Controlled stretching of the first spiral in electrospinning whipping jet via surface charge

Theoretical analysis of unstable segments of electrostatic spinning charged jet

Whipping of Electrified Visco-Capillary Jets in Airflows

Needle’s vibration in needle-disk electrospinning process: Theoretical model and experimental verification

The Effects of Electric Field on Jet Behavior and Fiber Properties in Melt Electrospinning

Numerical Simulation of the Morphology and Moving Velocity for Electrospun Stable Jet

Effect of "stagnation Plane" in the Electric Field During the Electrospinning Process

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

The Effects of Flow Rate and the Distance Between the Nozzle and the Target on the Operating Conditions of Electrospinning

Spinning solution flow model in the nozzle and experimental study of nanofibers fabrication via high speed centrifugal spinning

Modeling and Simulation of the Electrospinning Jet with Archimedean Spiral

Dissipative particle dynamics simulations of centrifugal melt electrospinning

The role of 3D electrostatic field in modeling the electrospinning process

A Numerical and Experimental Study on the Effect of the Cone Angle of the Spindle in Murata Vortex Spinning Machine

Controllable Generation of Nanofibers Through a Magnetic-Field-assisted Electrospinning Design

Characterization of Electrospinning Fiber Diameter Distributions and Process Dynamics for Development of Real-Time Control

Jet motion and fiber properties arising from a parallel electric field in melt-electrospinning

Fiber spiral motion in a swirl die melt-blowing process

Non-linear Langevin model for the early-stage dynamics of electrospinning jets

Stable Multi-Jet Electrospinning with High Throughput Using the Bead Structure Nozzle