Abstract:Electrospinning is a manufacturing technique that can produce microfibers and nanofibers from polymeric solutions. It has a broad range of applications in areas such as tissue engineering, flexible electronics, filtering, etc. However, due to its chaotic behavior, the fibers obtained by this process are prone to high diameter variations. The high diameter variations will cause poor final product functionality. The diameter is affected by process variables, ambient conditions and in-situ measurements. It is therefore important to model their effect on the fiber diameter variation, which is rarely investigated in the literature. Towards this end, this paper systematically studies the electrospinning process of a biocompatible polymer (i.e., polyacrylonitrile (PAN) 10%) via experimental study and data-driven modeling. In particular, three critical process variables (i.e., voltage, tip-to-collector distance, and polymer flow rate), are varied in a central composite design of experiment. Twenty-four runs are executed for the data collection, during which the in-situ measurements are collected via a customized sensing system. After each experiment, scanning electron microscope (SEM) images are taken from the nonwoven mats and characterized to capture the diameter and the diameter variations. Three machine learning methods, Lasso, random forest (RF), and support vector machine (SVM), are applied to the collected data. The model performance is evaluated in the real case study on the electrospinning ofpolymeric solution. The most predictive model (RF) can yield an around 15% relative error for prediction in testing data on average over 100 replications.

Characterization of Electrospinning Fiber Diameter Distributions and Process Dynamics for Development of Real-Time Control

Real-time Control of Micro/nanofiber Waist Diameter with Ultrahigh Accuracy and Precision

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Dissipative particle dynamics simulations of centrifugal melt electrospinning

Response Surface Methodology to Explore the Influence Mechanism of Fiber Diameter in a New Multi-Needle Electrospinning Spinneret

Simulation and experimental study of parameters in centrifugal electrospinning: Effects of rotor form on fiber formation

The role of 3D electrostatic field in modeling the electrospinning process

The Effects of Electric Field on Jet Behavior and Fiber Properties in Melt Electrospinning

Design, development, and experimental setup of near-field electrospinning with a sharp electrode: Influence of procedural parameters on the 3D nanofiber structure

A NEW CIRCULAR SPINNERET SYSTEM FOR ELECTROSPINNING Numerical Approach and Electric Field Optimization

The effect of relative humidity and evaporation rate on electrospinning: fiber diameter and measurement for control implications

Sub-ms dynamics of the instability onset of electrospinning

Electrospinning of Nanofibers: Reinventing the Wheel?

Finite element method assisted design of needleless electrospinning systems for mass production of polymer nanofibers

Advancing Nanofiber Research: Assessing Nonsolvent Contributions to Structure Using Coaxial Electrospinning

One- and two-dimensional electrodynamic steering of electrospun polymer nanofibers

A novel XYZ electrospinning that orients the trajectory and collimates the electrified fluid jet of polymer nanofibers by induced electric fields

Jet motion and fiber properties arising from a parallel electric field in melt-electrospinning

Spinning solution flow model in the nozzle and experimental study of nanofibers fabrication via high speed centrifugal spinning

Electrostatic-assisted Centrifugal Spinning for Continuous Collection of Submicron Fibers

Controlled stretching of the first spiral in electrospinning whipping jet via surface charge