Abstract:Electrospinning is a manufacturing technique that can produce microfibers and nanofibers from polymeric solutions. It has a broad range of applications in areas such as tissue engineering, flexible electronics, filtering, etc. However, due to its chaotic behavior, the fibers obtained by this process are prone to high diameter variations. The high diameter variations will cause poor final product functionality. The diameter is affected by process variables, ambient conditions and in-situ measurements. It is therefore important to model their effect on the fiber diameter variation, which is rarely investigated in the literature. Towards this end, this paper systematically studies the electrospinning process of a biocompatible polymer (i.e., polyacrylonitrile (PAN) 10%) via experimental study and data-driven modeling. In particular, three critical process variables (i.e., voltage, tip-to-collector distance, and polymer flow rate), are varied in a central composite design of experiment. Twenty-four runs are executed for the data collection, during which the in-situ measurements are collected via a customized sensing system. After each experiment, scanning electron microscope (SEM) images are taken from the nonwoven mats and characterized to capture the diameter and the diameter variations. Three machine learning methods, Lasso, random forest (RF), and support vector machine (SVM), are applied to the collected data. The model performance is evaluated in the real case study on the electrospinning ofpolymeric solution. The most predictive model (RF) can yield an around 15% relative error for prediction in testing data on average over 100 replications.

Sub-ms dynamics of the instability onset of electrospinning

Ultrathin fibres from electrospinning experiments under driven fast-oscillating perturbations

Models of polymer solutions in electrified jets and solution blowing

Observation of Electrospinning Behavior of Nanoscale Fibers by a High-Speed Camera

Effects of Nanoparticles on the Dynamic Morphology of Electrified Jets

Non-linear Langevin model for the early-stage dynamics of electrospinning jets

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Three-Dimensional Model for Electrospinning Processes in Controlled Gas Counterflow

Different regimes of the uniaxial elongation of electrically charged viscoelastic jets due to dissipative air drag

Effects of non-linear rheology on the electrospinning process: a model study

Characterization of Electrospinning Fiber Diameter Distributions and Process Dynamics for Development of Real-Time Control

Oscillation Dynamics of Dielectric Polymer Droplets during Electrohydrodynamic Jetting in a Wide Range of Viscosities

The Effects of Electric Field on Jet Behavior and Fiber Properties in Melt Electrospinning

Electrospinning of micro spiral fibers

Theoretical analysis of unstable segments of electrostatic spinning charged jet

Stable Multi-Jet Electrospinning with High Throughput Using the Bead Structure Nozzle

Optimization of electrospinning techniques for the realization of nanofiber plastic lasers

Effect of "stagnation Plane" in the Electric Field During the Electrospinning Process

A novel XYZ electrospinning that orients the trajectory and collimates the electrified fluid jet of polymer nanofibers by induced electric fields

Design, development, and experimental setup of near-field electrospinning with a sharp electrode: Influence of procedural parameters on the 3D nanofiber structure

Dissipative particle dynamics simulations of centrifugal melt electrospinning