Cathode fall thickness of abnormal glow discharges between parallel-plane electrodes in different radii at low pressure

yangyang fu,h luo,xiaobing zou,xinxin wang

DOI: https://doi.org/10.1063/1.4907660

IF: 2.2

2015-01-01

Physics of Plasmas

Abstract:In order to investigate the influence of electrode radius on the characteristics of cathode fall thickness, experiments of low-pressure (20 Pa <= p <= 30 Pa) abnormal glow discharge were carried out between parallel-plane electrodes in different radii keeping gap distance unchanged. Axial distributions of light intensity were obtained from the discharge images captured using a Charge Coupled Device camera. The assumption that the position of the negative glow peak coincides with the edge of cathode fall layer was verified based on a two-dimensional model, and the cathode fall thicknesses, d(c), were calculated from the axial distributions of light intensity. It was observed that the position of peak emission shifts closer to the cathode as current or pressure grows. The dependence of cathode fall thickness on the gas pressure and normalized current J/p(2) was presented, and it was found that for discharges between electrodes in large radius the curves of pd(c) against J/p(2) were superimposed on each other, however, this phenomenon will not hold for discharges between the smaller electrodes. The reason for this phenomenon is that the transverse diffusions of charged particles are not the same in two gaps between electrodes with different radii. (C) 2015 AIP Publishing LLC.