Effect of B and Ti on the Directionally Solidified Microstructure of the Nb–Si Alloys

Zhiping Sun,Xiping Guo,Baohui Guo

DOI: https://doi.org/10.1016/j.ijrmhm.2015.04.015

2015-01-01

Abstract:With the guidance of the calculated phase diagram of the Nb–Ti–Si–B system, three alloys (M1: Nb–20Ti–14Si; M2: Nb–20Ti–14Si–4.5B; M3: Nb–24Ti–14Si–4.5B (at.%)) were selected to investigate the influence of alloying elements B and Ti on their microstructural formation. The alloys were prepared by arc-melting and then directionally solidified (DS) at a withdrawing rate of 10 μm/s. The DS microstructures in the near-solidification front zone, the mushy zone, and the steady-state zone were characterized by SEM, EPMA and XRD analyses. The experimentally observed solidified microstructures were then compared with the predicted solidification path calculated from the Scheil model. The good agreement between the experimental observations and the predicted solidification paths suggests that the computational models can be effectively used for the design of the Nb–Ti–Si–B alloys.