Abstract:Abstract Here, a new pretreatment method has been developed to produce CNFs from micro-fibrillated cellulose (MFC) by supercritical CO 2 pretreatment followed with ball-milling (SCB). MFC was obtained from cotton stalk by chemical purification.Experimental factors were controlled to enhance the properties of SCB-CNF, meanwhile a comparative study was conducted with the method of TEMPO oxidation and microfluid homogenization (TMH). Compared to TMH-CNF, the SCB-CNF has such advantages as Energy saving, high efficiency and environmental protection, indicating a wide application in heat-resistant materials, load materials and other fields. The solid yields of P-MFC after supercritical CO 2 pretreatment gradually decreased together with the temperature and the reaction time. Scanning electron microscope (SEM) images of the SCB-CNF and TMH-CNF show that the morphology of the SCB-CNF was basically acicular but that of the TMH-CNF was mainly soft fibrous. The SCB-CNF is smaller in width and shorter in length, and its size is between CNC and CNF. Thermal gravimetric results suggest that the thermal stability of the SCB-CNF was substantially higher than those of the TMH-CNF. XRD results indicate that the crystallinity showed an initial increasing trend and then declined with increasing temperature and reaction time, and the crystallinity value of SCB-CNF was larger than that of CNFs. The smaller SCB-CNF became rougher and had a larger surface area. High crystallinity make good thermal stability, short and coarse fiber, easier to disperse than CNF, less energy consumption for dispersion, better than 3D mesh. It can be widely used in polymer composites, reinforcing agents, membrane materials and other fields.

Isolation And Characterization Of Corncob Cellulose Fibers Using Microwave-Assisted Chemical Treatments

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Preparation and Characterization of Porous Microcrystalline Cellulose from Corncob

OPTIMIZATION OF PURIFIED CELLULOSE EXTRACTION FROM CORN COB AND CHARACTERIZATION OF THE ISOLATED PRODUCT

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

Structural characteristics of corncob and eucalyptus contributed to sugar release during hydrothermal pretreatment and enzymatic hydrolysis

Extraction and characterization of cellulose microfibers from cornhusk for application as reinforcing agent in biocomposite

Isolating Cellulose Nanofibers from Steam-Explosion Pretreated Corncobs Using Mild Mechanochemical Treatments

Xylo-sugars Production by Microwave-Induced Hydrothermal Treatment of Corncob: Trace Sodium Hydroxide Addition for Suppression of Side Effects

Influence of hydrothermal pretreatment of corncob on structure of cellulose

Production of Xylo-Sugars from Corncob by Oxalic Acid-Assisted Ball Milling and Microwave-Induced Hydrothermal Treatments

Xylan Sulphates Prepared Via Microwave-Assisted Esterifications Reaction From Corncob

High concentration ethanol production from corncob residues by fed-batch strategy.

Isolation and characterization of micro and nanocrystalline cellulose fibers from the walnut shell, corncob and sugarcane bagasse

Characterization of natural cellulose fiber from corn stalk waste subjected to different surface treatments

Multimode Ultrasound and Ternary Deep Eutectic Solvent Sequential Pretreatments Enhanced the Enzymatic Saccharification of Corncob Biomass

Effect of corncob initial water content on hemicellulose separation and cellulose enzymatic hydrolysis pretreated with steam explosion

Properties of Nanocellulose Isolated from Corncob Residue Using Sulfuric Acid, Formic Acid, Oxidative and Mechanical Methods.

Thermal Sensitive Hydrogels Prepared From Hemicelluloses Ultrasonically Extracted From Corncob

Isolation of Cellulose Nanofibers (CNFs) based on Ball-milling Technique Combined with Supercritical Carbon dioxide/ethanol Pretreatment

Catalytic hydrolysis of corncob for production of furfural and cellulose-rich solids: Product characterization and analysis