Abstract:Extensional flow plays a significant role in many processing operations of polymer melts. However, for slender polymer melts, the measurements of the extensional behavior were strongly limited by the gravitational sagging effect in the Sentmanat extensional rheometry (SER). In this work, a new extensional rheometry was designed to combine the merits of the SER and the rheometric melt elongation rheometer. The new fixture was sufficiently miniaturized to be adapted to the environment chamber of a commercial rotational rheometer. During the measurements, the samples were supported by a base lubricated by oil or microfine polytetrafluorethylene powder to effectively reduce the friction and sagging effects. The new design was validated, using materials with a wide range of viscosities, to extend the low viscosity limit to about two decades compared with the SER fixture, i.e., from ∼104 to ∼102 Pa s.Extensional flow plays a significant role in many processing operations of polymer melts. However, for slender polymer melts, the measurements of the extensional behavior were strongly limited by the gravitational sagging effect in the Sentmanat extensional rheometry (SER). In this work, a new extensional rheometry was designed to combine the merits of the SER and the rheometric melt elongation rheometer. The new fixture was sufficiently miniaturized to be adapted to the environment chamber of a commercial rotational rheometer. During the measurements, the samples were supported by a base lubricated by oil or microfine polytetrafluorethylene powder to effectively reduce the friction and sagging effects. The new design was validated, using materials with a wide range of viscosities, to extend the low viscosity limit to about two decades compared with the SER fixture, i.e., from ∼104 to ∼102 Pa s.

Measurement of Lubricant Viscosity and Detection of Boundary Slip at High Shear Rates

Measurement of Oil Film Thickness for Application to Elastomeric Stirling Engine Rod Seals

Friction and Wear Protection Performance of Synthetic Siloxane Lubricants

On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface

Measurement of slip length and friction reduction: An experimental study about boundary slip using omniphobic and 2D coatings

On the Measurement of Slip Length for Liquid Flow over Super-Hydrophobic Surface

Multi-position Measurement of Oil Film Thickness Within the Slipper Bearing in Axial Piston Pumps

Measurement and Quantification of Effective Slip Length at Solid–Liquid Interface of Roughness-Induced Surfaces with Oleophobicity

Experimental Investigation of Lubrication Properties at High Contact Pressure

The Effect of Energy Accumulation and Boundary Slip on Laminar Flow Between Rotating Plates

Study on the Influence of Surface Roughness on Wall Slip Effect (in Rheological Measurement) of Magnetic Fluid

Molecular Dynamics Study of Interfacial Slip Behavior of Ultrathin Lubricating Films

An Approach For Accurate Measurement Of Lubricant Film Thickness By Fiber-Optic Michelson Interferometer

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

A Technique for Measuring Dynamic Friction Coefficient under Impact Loading

Analytical and numerical validation of a plate-plate tribometer for measuring wall slip

Horizontal Extensional Rheometry (HER) for Low Viscosity Polymer Melts

Development of High-pressure Micro-clearance Tribological Measuring Apparatus

Toward a continuum description of lubrication in highly pressurized nanometer-wide constrictions: The importance of accurate slip laws

Preliminary study of the superlubricity behavior of ZrO2/PI lubricating with liquid crystal

Contactless Interfacial Rheology: Probing Shear at Liquid-Liquid Interfaces without an Interfacial Geometry via Fluorescence Microscopy