Abstract:A systematical simulation has been carried out on the indentation creep test on particle-reinforced composites. The deformation, failure mechanisms and life are analyzed by three reasonable models. The following five factors have been considered simultaneously: creep property of the particle, creep property of the matrix, the shape of the particle, the volume fraction of the particle and the size (relative size to the particle) of the indentation indenter. For all the cases, the power law respecting to the applied stress can be used to model the steady indentation creep depth rate of the indenter, and the detail expressions have been presented. The computer simulation precision is analyzed by the two-phase model and the three-phase model. Two places of the stress concentration are found in the composites. One is ahead of the indentation indenter, where the high stress state is deduced by the edge of the indenter and will decrease rapidly near to a steady value with the creep time. The other one is at the interface, where the high stress state is deduced by the misfit of material properties between the particles and matrix. It has been found that the creep dissipation energy density other than a stress parameter can be used to be the criterion to model the debonding of the interfaces. With the criterion of the critical creep dissipation energy density, a power law to the applied stress with negative exponent can be used to model the failure life deduced by the debonding of interfaces. The influences of the shape of the particles and the matching of creep properties of particle and matrix can be discussed for the failure. With a crack model, the further growth of interface crack is analyzed, and some important experimental phenomena can be predicted. The failure mechanism which the particle will be punched into matrix has been also discussed. The critical differences between the creep properties of the particles and matrix have been calculated, after a parameter has been defined. In the view of competition of failure mechanisms, the best matching of the creep properties of the two phases and the best shape of the particles are discussed for the composite design.

Further Investigation of Particle Reinforced Aluminum Matrix Composites by Indentation Experiments

Mechanical Properties Study of Particles Reinforced Aluminum Matrix Composites by Micro-Indentation Experiments

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

An Investigation of Micro-Mechanical Properties of Al Matrix in SiC/Al Composite by Indentation Experiments

Computer Simulation of the Indentation Creep Tests on Particle-Reinforced Composites

An Improved Analytic Model for Extracting Plastic Mechanical Property of Matrix in Hot-Extruded In-Situ TiB2/2024 Composite Based on Berkovich Indentation Experimental Results

Experiment and FEM Study on Uniaxial Tensile of SiCp/Al

Nanoindentation Characterisation Of The Properties Around Reinforcements In A Heat Treated Spray Deposited 2014+15vol%Sicp Metal-Matrix Composite

3D finite element analysis on SiCP/Al composite

Strengthening mechanism of load sharing of particulate reinforcements in a metal matrix composite

Indentation Behavior of Aluminum Alloy with Inclusions

Circular Nano-Indentation in Particle-Reinforced Metal Matrix Composites: Simply Uniformly Distributed Particles Lead to Complex Nano-Indentation Response

Particle Shape Effects on Ductility of Sic Particle Reinforced Ld2 Matrix Composites Investigated by Afm-Based Nanoindentation

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

In situ mechanical testing of an Al matrix composite to investigate compressive plasticity and failure on multiple length scales

Microstructure-based Simulation of Plastic Deformation Behavior of SiC Particle Reinforced Al Matrix Composites

Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites

Micromechanical Modeling of the Deformation and Damage Behavior of Al6092/SiC Particle Metal Matrix Composites

On Understanding the Mechanical Properties and Damage Behavior of Cf/SiC Composites by Indentation Method

Particle Size Effect on the Interfacial Properties of SiC Particle-Reinforced Al-Cu-Mg Composites

Mechanical Behavior and Interfacial Micro-Zones of SiCp(CNT) Hybrid Reinforced Aluminum Matrix Composites