Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Impact of High Porosity on Thermal Transport in UO_2 Nuclear Fuel

Simulation of the impact of 3-D porosity distribution in metallic U–10Zr fuels

Molten uranium dioxide structure and dynamics

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

Microstructural Evolution of Gas Bubbles and Thermal Conductivity in UO2-BeO Bicrystal

Modeling the Irradiation Swelling of UO2 at the Fuel Pellet Rim

Prediction and Deformation Mechanism Analysis of High Porosity in U–10Mo Monolithic Fuels at High Burnup

Porosity Effect on the Thermal and Mechanical Properties of U-50Zr Alloy: A Molecular Dynamics Study

SIMULATION OF FISSION GAS BUBBLE DISTRIBUTION AND CALCULATION OF EFFECTIVE THERMAL CONDUCTIVITY IN U-Zr METALLIC FUEL BASED ON PHASE-FIELD METHOD

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates

Computational study of the effect of grain boundary and nano-porosity on xenon behavior in UO2

ANALYSIS OF UO2-BEO FUEL PERFORMANCE DURING NORMAL CONDITIONS AND RIA

Heat Transfer Simulations of the UO2 Particle–graphite System in TREAT Fuel

Porosity Effects on Oxidation of Ultra-High-Temperature Ceramics

Abnormal Grain Growth of UO2 with Pores in the Final Stage of Sintering: A Phase Field Study

Effect of Fuel Meat Thickness on the Non-Uniform Irradiation-Induced Thermo-Mechanical Behavior in Monolithic UMo/Al Fuel Plates

High Phonon Scattering Rates Suppress Thermal Conductivity in Hyperstoichiometric Uranium Dioxide

Fabrication of UO2-BeO composite pellets with superior thermal conductivity based on multi-parameter theoretical analyses

Molecular dynamics simulations of the effect of porosity on heat transfer in Li2TiO3

Effect of porosity on oxidation of nuclear grade graphite