Synergetic Effect of Particle Shape and Multi-Layer Coating on the Magnetic Properties of FeSiAl-based Soft Magnetic Composites
Chuanjian Wu,Yuantao Wang,Lu Yang,Qifan Li,Yu Wang,Ziyu Li,Xiaona Jiang,Zhongwen Lan,Ke Sun,Zhong Yu
DOI: https://doi.org/10.1016/j.ceramint.2024.01.035
IF: 5.532
2024-01-01
Ceramics International
Abstract:Gas atomization and multi-layer coating are widely used powder fabrication techniques to prepare soft magnetic composites (SMCs) utilized in high-power low-loss power electronics. However, the diverse morphologies of gas-atomized powders significantly impact coating effectiveness, subsequently influencing the soft magnetic properties of SMCs. Herein, FeSiAl-based SMCs with different particle shapes and a multi-layer coating of phosphate and heat-resistant silicone resin are prepared to explore the synergetic effects of particle shape and coating on magnetic performances. Compared with dumbbell-shaped powder, the spherical powder has a regular shape and strong flowability, resulting in a close-packing structure of the magnetic core. The spherical particle with a large specific surface area promotes efficient insulation coating effects. The dumbbell-shaped particles are potentially prone to cause pores and defects during the high-pressure compaction process, leading to poor dense packing and magnetic loss performance. With a similar average particle size, the magnetic core prepared by spherical powders exhibits a larger interface area, resulting in a greater demagnetizing field after phosphating passivation, thus significantly improving the DC-bias performance. The FeSiAl-based magnetic core prepared by spherical powders with 1.5 wt% phosphoric acid passivation has better magnetic loss and DC-bias properties than that by dumbbell-shaped powders, showing a stable permeability of 60.4, core loss of 286.2 mW/cm3 at 100 mT, 100 kHz, and DC bias characteristic of 49.1 % at a DC superposition field of 100 Oe.