Abstract:Recoverable magnetic biochar has great potential for treating wastewater contaminants such as Pb(II). However, whether magnetic modification could enhance metal adsorption efficiency is currently contradictory in the literature mainly due to the differences in selecting various magnetic functionalization conditions. Considering this gap in knowledge, the effects of magnetic functionalization method (impregnation and precipitation), concentration of precursor iron solution (0.01-1 M), and pyrolysis temperature (300-700 °C) on the characteristics and Pb(II) adsorption capacity of biochar were systematically investigated in this paper. Results indicated that Fe<sub>3</sub>O<sub>4</sub> was the main product for magnetic biochars synthesized using the impregnation (denoted as FWFe(3)) and precipitation methods (denoted as FWFe(2)). Magnetic functionalization resulted in remarkably increased pH and more negative zeta potential for FWFe(2) samples, whereas FWFe(3) samples showed the opposite trends. The adsorption of Pb(II) on different biochars fitted the pseudo-second order model and the Langmuir model. The maximum adsorption capacity was 817.64 mg/g for FWFe(2)1M700C (precipitation by 1 M of Fe(II)/Fe(III), pyrolysis at 700 °C), outperforming FWFe(3) and pristine biochar samples by around 5-13 times. Mechanism study indicated that the adsorption mainly involved electrostatic attraction, ion exchange, co-precipitation, and complexation. Pb(II) adsorption capacity was strongly dependent on the alkali pH of biochar. However, this efficiency was less affected by biochar surface area and its morphology. The higher pH of FWFe(2) samples not only led to an increased surface charge for stronger electrostatic attraction and ion exchange but also favored the formation of co-precipitates. By contrast, FWFe(3) samples showed a decreased adsorption capacity for Pb(II) with increased concentration of embedded iron. Overall, magnetic biochar, prepared using precipitation followed by high-temperature pyrolysis (such as, FWFe(2)1M700C), can be a promising adsorbent for Pb(II) adsorption from wastewater.

Effective Removal of Pb(Ii) Using Magnetic Co0.6fe2.4o4 Micro-Particles As the Adsorbent: Synthesis and Study on the Kinetic and Thermodynamic Behaviors for Its Adsorption

Adsorptive Removal of Pb(II) by Magnetic Activated Carbon Incorporated with Amino Groups from Aqueous Solutions

The Combination of Novel Airlift Magnetic Separation Loop System and an Efficient Biosorbent for the Removal of Pb(II) from Aqueous Solution

Facile self-assembly synthesis of titanate/Fe3O4 nanocomposites for the efficient removal of Pb2+ from aqueous systems

Utilization of peanut hull hydrochar /beta cyclodextrin/Fe3O4 magnetic composite for lead ion removal from water solution

Efficient removal of Pb(II) from aqueous solution by a novel ion imprinted magnetic biosorbent: Adsorption kinetics and mechanisms

Removal of Pb(II) from Aqueous Solutions by Adsorption Using Nano Mesoporous Silica MCF Adsorbent: Kinetic, Thermodynamic, Isotherm and Equilibrium Studies

Adsorption Behavior of Fe3O4/ Poly(Acrylate Methy Lester-co-Divinylbenzene)Microspheres Toward Metal Ions

Adsorption of MB and Pb(II) before and after magnetic modification: Performance and mechanism

Adsorption Behavior of Fe_3O_4/Poly(Acrylate Methy Lester-co-Divinylbenzene) Microspheres Toward Metal Ions

Novel magnetic covalent organic framework for the selective and effective removal of hazardous metal Pb(II) from solution: Synthesis and adsorption characteristics

Fe_3O_4/Acrylate-based Magnetic Microparticles:Preparation and Adsorption Performance Toward Hg~(2+),Cu~(2+) and Ni~(2+)

Effective Removal of Pb(II) from Aqueous Media by a New Design of Cu–Mg Binary Ferrite

Selective Removal for Pb2+ in Aqueous Environment by Using Novel Macroreticular PVA Beads.

Removal of Pb(II) ions from aqueous media using epichlorohydrin crosslinked chitosan Schiff's base@Fe3O4 (ECCSB@Fe3O4)

Removal of Cd(II) from Micro-Polluted Water by Magnetic Core-Shell Fe3O4@Prussian Blue

[Osteoarthritis in the light of current research findings].

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Efficiently selective removal of Pb(II) by magnetic ion-imprinted membrane based on polyacrylonitrile electro-spun nanofibers

Preparation of pectin/poly(m-phenylenediamine) microsphere and its application for Pb2+ removal

Optimizing magnetic functionalization conditions for efficient preparation of magnetic biochar and adsorption of Pb(II) from aqueous solution