Abstract:We propose and numerically characterize the optical characteristics of a novel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor in the visible to near infrared (500-2000 nm) region for refractive index (RI) sensing. The finite element method (FEM) is used to design and study the influence of different geometric parameters on the sensing performance of the sensor. The chemically stable plasmonic material gold (Au) is used to produce excitation between the core and plasmonic mode. On a pure silica (SiO2) substrate, a rectangular structured core is used to facilitate the coupling strength between the core and the surface plasmon polariton (SPP) mode and thus improves the sensing performance. By tuning the geometric parameters, simulation results show a maximum wavelength sensitivity of 58000 nm/RIU (Refractive Index Unit) for the x polarization and 62000 nm/RIU for the y polarization for analyte refractive indices ranging from 1.33 to 1.43. Moreover, we characterize the amplitude sensitivity of the sensor that shows a maximum sensitivity of 1415 RIU-1 and 1293 RIU-1 for the x and y polarizations, respectively. To our knowledge, this is the highest sensitivity for an SPR in published literature, and facilitates future development of sensors for accurate and precise analyte measurement. The sensor also attains a maximum figure of merit (FOM) of 1140 and fine RI resolution of 1.6 × 10-6. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.

Biosensing Using Diffractively Coupled Plasmonic Crystals: the Figure of Merit Revisited

Revisiting the Surface Sensitivity of Nanoplasmonic Biosensors

Boosting the Figure of Merit of Refractive Index Sensing Via Magnetoplasmon in H-shaped Magnetoplasmonic Crystals.

Performance improvement of refractometric sensors through hybrid plasmonic-Fano resonances

Plasmonic Crystal Cavity on Single-Mode Optical Fiber End Facet for Label-Free Biosensing

Fano Resonance-Plasmonic Biosensors Based on Strong Coupling of Hybrid Plasmonic-Photonic Modes

Improvement of Figure of Merit for Gold Nanobar Array Plasmonic Sensors

Design and performance analysis of a highly sensitive photonic crystal fiber based plasmonic sensor

Bimodal Plasmonic Refractive Index Sensors Based on SU-8 Waveguides

Self-reference plasmonic sensors based on double Fano resonances.

Ultrahigh sensitive surface plasmon sensor using a nanofilm coated D-type photonic crystal fiber

Label-free Biosensing Using a Photonic Crystal Structure in a Total-Internal-reflection Geometry

Integrated Plasmonic Refractive Index Sensor Based on Grating/metal Film Resonant Structure

High-Sensitivity Plasmonic Sensor By Narrowing Fano Resonances In A Tilted Metallic Nano-Groove Array

Low Dimensional Nanostructure-Assisted Long-Range Surface Plasmon Resonance Sensors with High Figure of Merit

Dual-polarized highly sensitive plasmonic sensor in the visible to near-IR spectrum

Symmetric Guided-Mode Resonance Sensors in Aqueous Media with Ultrahigh Figure of Merit

Highly Sensitive Localized Surface Plasmon Polariton Based D-Type Twin-Hole Photonic Crystal Fiber Microbiosensor: Enhanced Scheme for SERS Reinforcement

Sensitivity Enhanced Dual-Core Photonic Crystal Fiber Surface Plasmon Resonance Sensor Based on Gold Film

High-Property Refractive Index and Bio-Sensing Dual-Purpose Sensor Based on SPPs

High Figure of Merit SPR Sensor Based on Raspberry-Like Silica