Abstract:The utilisation of cotton waste as precursors in the synthesis of nanocrystalline cellulose has gained significant attention. This approach suggests a sustainable solution to address the growing concern of textile waste accumulation while simultaneously producing a valuable material. The main aim of this study is to examine the properties of cellulose nanocrystals (CNCs) obtained from postconsumer polyester–cotton waste and assess the effect of different fabric structures on the extraction and these properties. To acquire nanocellulose, a thorough decolourisation pretreatment process was utilised, which involved the treatment of polyester–cotton waste with sodium dithionite and hydrogen peroxide. Consequently, the postconsumer material was then treated with an acid hydrolysis method employing a 64% (v/v) sulphuric acid solution at 50 °C for 75 min, resulting in the formation of CNCs with average yield percentages ranging from 38.1% to 69.9%. Separation of the acid from the CNC was facilitated by a centrifugation process followed by dialysis against deionised water. Uniform dispersion was then achieved using ultrasonication. A variety of analytical techniques were employed to investigate the morphological, chemical, thermal, and physical properties of the isolated CNCs. Among these techniques, attenuated total reflection-Fourier-transform infrared spectroscopy (ATR-FTIR), energy-filtered transmission electron microscopy (EF-TEM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were utilised to analyse the CNCs. The findings indicated that the separated CNCs exhibited a rod-shaped morphology, measuring between 78 and 358 nm in length and 5 and 16 nm in diameter, and also exhibited high crystallinity (75–89%) and good thermal stability. The extracted CNCs were mixed with polyvinyl alcohol (PVA) and glycerol to assess their reinforcing effect on plastic films. The prepared composite film exhibited improved mechanical properties and thermal stability. Incorporating CNCs led to a 31.9% increase in the tensile strength and a 42.33% rise in the modulus of elasticity. The results from this research proved that CNCs can be extracted from postconsumer mixed fabrics as a potential solution to effectively address the mounting concerns surrounding waste management in the textile industry and also provide avenues for enhancing the qualities of eco-friendly composite films.

Mechanochemically Activated Waste‐derived Cellulose As a Novel Functional Additive to Enhance Melt Processability and Mechanical Properties of Poly(vinyl Alcohol)

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Scalable manufacturing of cellulose nanofibrils assisted by organic stone waste to expand the melt-processing window of poly(vinyl alcohol)

Melt-processable polyvinyl alcohol/lignin composites with improved strength via synergistic plasticization of lignin

Investigation of the effects of cellulose nanofiber on the properties of poly(vinyl alcohol) crosslinked by 2,5-furandicarboxylic acid

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

Physicochemical Properties of Cellulose Nanocrystals Extracted from Postconsumer Polyester/Cotton-Blended Fabrics and Their Effects on PVA Composite Films

Investigation on Changes in the Miscibility, Morphology, Rheology and Mechanical Behavior of Melt Processed Cellulose Acetate Through Adding Polyethylene Glycol As A Plasticizer

Mechanochemical Preparation of Poly(vinyl alcohol)/Carboxymethyl Cellulose Composites

Effect of Length of Cellulose Nanofibers on Mechanical Reinforcement of Polyvinyl Alcohol

Enteromorpha cellulose micro-nanofibrils/poly(vinyl alcohol) based composite films with excellent hydrophilic, mechanical properties and improved thermal stability

Cellulose nanocrystals from cotton stalk for reinforcement of poly ( vinyl alcohol ) composites

Preparation and properties of PBAT / PLA composites modified by PVA and cellulose nanocrystals

The Investigation Plasticizing Mechanism on Poly (vinyl alcohol)/Water/Caprolactam System and the Preparation of Raw PVA Fibers by Melt Spinning

Mechanically Strong, Heat-Resistant, Water-Induced Shape Memory Poly(vinyl Alcohol)/regenerated Cellulose Biocomposites Via a Facile Co-precipitation Method

Phosphorylated Cellulose Applied for the Exfoliation of LDH: an Advanced Reinforcement for Polyvinyl Alcohol

A novel surface modification for calcium sulfate whisker used for reinforcement of poly(vinyl chloride)

Water Resistance, Mechanical Properties and Water-Induced Shape Memory Properties of Poly(vinyl Alcohol) Materials Modified by Waste Polyester Depolymerization Monomer

Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement

A regenerated cellulose fiber with high mechanical properties for temperature-adaptive thermal management

Lignin–Poly(vinyl alcohol) Compound from Acetalization Synthesis as a Reinforcing Filler for High-Performance Gel-Spun Fibers