Abstract:Natural fiber reinforced plastics (NFRPs) represent a promising category of emerging materials for sustainable industrial development owing to their renewability, degradability, and lightweight. However, the polarity mismatch between the fibers and polymer matrices weakens the mechanical properties of NFRPs. To address this issue, a novel hierarchical interface design was proposed here through the co-modification of silane coupling agents (SCAs) and zinc oxide nanorods (ZnO NRs), which exhibits not only high efficiency but also low energy consumption and environmental friendliness. Specifically, the hierarchical interface design was demonstrated on jute fibers (JFs)/polypropylene (PP) composites, where the JFs/ZnO interfaces were chemically bonded through complexation, chelation, or coordination using various SCAs; meanwhile, the ZnO/PP interfaces were physically bonded by interlocking effect. The experimental testing results indicated the exceptional mechanical properties of modified JFs and their composites. The JFs modified with 3-glycidyloxypropyltrimethoxysilane (KH560) and ZnO NRs exhibited an increase of 34.3% and 55.8% in single-fiber tensile strength and tensile modulus, respectively, compared to sololy ZnO coated JFs, and also showed an augment of 30.8% in the interfacial shear strength with PP resin. Thus, the transverse and longitudinal tensile strength of JFs/PP composites with combined modification of KH560 and ZnO NRs were 19.2% and 46.5% higher than untreated ones. The interfacial enhancement mechanism was ascribed to the synergistic effect of chemical bonding and physical interlocking, as revealed by molecular dynamics simulation and observation of fracture morphologies. The findings offer a cost-effective solution for developing JFs/PP composites with superior interfacial and mechanical properties, thereby promoting the practical applications and value of NFRPs.

Improving the Performances of Polyethylene/sisal Fiber Composites by Infiltratively Compatibilizing the Multi-Scale Interfaces

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Significant Improvement in Performance of Recycled Polyethylene/Wood Flour Composites by Synergistic Compatibilization at Multi-Scale Interfaces

Transform Rice Husk and Recycled Polyethylene into High Performance Composites: Using a Novel Compatibilizer to Infiltratively Enhance the Interfacial Interactions

Blossom Morphology and Correlative Performance Improvement of Recycled Polyethylene/Wood Flour Composites with Steam-Activated Interfaces

Effect of Interfacial Modifiers and Wood Flour Treatment on the Rheological Properties of Recycled Polyethylene/wood Flour Composites

Mechanical properties of sisal fiber reinforced high density polyethylene composites: Effect of fiber content, interfacial compatibilization, and manufacturing process

Effect of interfacial modification on functional properties of polyethylene and polypropylene—Fibrous silica nanocomposites

Effect of Interfacial Modifiers on Physical Properties and Flammability Properties of Pe/Wood Composites

Improved mechanical properties of in situ microfibrillar polypropylene/polyamide6 composites through constructing strong interfacial adhesion

Hierarchical interface design of jute fibers/polypropylene composites for enhanced interfacial and mechanical properties

The combined effect of impregnated rollers configuration and glass fibers surface modification on the properties of continuous glass fibers reinforced polypropylene prepreg composites

The Preparation and Properties of Wood Flour/high Density Polyethylene Composites by In‐situ Reaction Extrusion

Micro- and Nano-Scale Mechanisms of Enzymatic Treatment on the Interfacial Behaviors of Sisal Fiber Reinforced Bio-Based Epoxy Resin

Improving the interfacial shear strength of polypropylene/carbon fiber nonwoven composite by three different methods

Improving the interfacial property of CF composites through constructing multiscale interfacial nanostructures

Synergistic Effects of Hybrid Graphitic Nanofillers on Simultaneously Enhanced Wear and Mechanical Properties of Polymer Nanocomposites

The rigid-flexible balanced molecular crosslinking network transition interface: An effective strategy for improving the performance of bamboo fibers/poly(butadiene succinate-co-butadiene adipate) biocomposites

Effect of Fiber Modified by Alkali/polyvinyl Alcohol Coating Treatment on Properties of Sisal Fiber Plastic Composites

Preparation and characterization of a sustainable foamed biocomposite from compatibilized recycled polyethylene and agave fiber