Abstract:A ball-joint-like three-degree-of-freedom (3-DOF) spherical actuator which features a ball-shaped rotor with multiple permanent magnet (PM) poles and a spherical-shell-like stator with air-core coils is proposed to achieve omnidirectional smooth motion in only one joint. Unlike previous study in which dihedral-shaped PMs are employed as the rotor poles, this spherical actuator takes advantage of cylindrical-shaped PMs to reduce the system cost (up to 80%) and facilitate the fabrication. The torque output of this spherical actuator is formulated with a hybrid method, i.e. using both analytical and experimental methodologies. Specifically, the analytical model of spherical actuator with dihedral-shaped PM poles is presented. Then a research prototype with cylindrical-shaped PM poles is developed, and a torque measurement testbed is built up to conduct the experiment on the prototype. As the torque variation of two PM-pole designs with respect to the rotor orientation is similar, the parameters in the analytical model are adjusted to fit with the experimental measurements. The resulting torque model can be employed for motion control of the actuator. Furthermore, compared with dihedral-shaped magnets, the employment of cylindrical-shaped magnet poles is able to reduce the inertial moment of the rotor by 60%, which is favorable for achieving better actuator dynamic performance.

Modeling and Analysis of A 3-Dof Spherical Momentum Exchange Actuator for Spacecraft Attitude Maneuver

Hybrid Actuator Optimal Angular Momentum Management with Analytical Solution for Spacecraft Attitude Agile Maneuvering Mission

A Novel Two-Degree-of-freedom Spherical Ultrasonic Motor Using Three Travelling-Wave Type Annular Stators

Hybrid torque modeling of spherical actuators with cylindrical-shaped magnet poles

Empirical Formulation Of Torque Output For Spherical Actuators With Low-Cost Rotor Poles

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Analysis And Decoupling Control Of A Permanent Magnet Spherical Actuator

Design and modeling of a spherical actuator with three dimensional orientation measurement system

Optimization of a Novel Spherical Actuator with 3-DOF Motion

A Novel Electrodynamic Reaction Sphere Prototype for Spacecraft Attitude Control.

Dynamic Control of a Spherical Actuator with Orientation Measurement Feedback

A novel approach in generating 3-DOF motions

Modeling of Torque Output and Magnetic Force for Novel Spherical Actuator with Three-Dimensional Pole Arrays

Trajectory Planning And Current Control Optimization Of Three Degree-Of-Freedom Spherical Actuator

Torque Modelling and Current Optimization of a Spherical Actuator Built As an Electro-Magnets Driven Spherical Parallel Manipulator.

Dynamic Modelling and Parameter Identification of a Three-Degree-of-freedom Spherical Actuator

The Magnetic Field Analysis of a Spherical Actuator with Three-Dimensional Orientation Measurement Device

Design and Optimization of a Magnetically Levitated Inductive Reaction Sphere for Spacecraft Attitude Control

Modeling of Magnetic Field and Design Optimization for Permanent-Magnet Spherical Actuator in Three Dimensional Space

Analytical Models Of Electromagnetic Field And Torques In A Novel Reaction Sphere Actuator

Gimbal Actuator Modeling for a Spin-Stabilized Spacecraft Equipped with a 1DoF Gimbaled-Thruster and two Reaction Wheels