Abstract:Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Solvent‐free Fabrication of Proton‐conducting Membranes Based on Commercial Elastomers

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

A novel environment-friendly route to prepare proton exchange membranes for direct methanol fuel cells

Synthesis and Performance of Acrylonitrile-Styrenesulfonic Acid Copolymer Proton Conducting Membrane

Synthesis and Characterization of Polyurethanic Proton Exchange Membranes

Preparation of Solvent-Resistant Anion-Exchange Membranes

Design of Polyphosphazene-Based Graft Copolystyrenes with Alkylsulfonate Branch Chains for Proton Exchange Membranes

Influence of Composition on the Proton Conductivity and Mechanical Properties of Sulfonated Poly(aryl Ether Nitrile) Copolymers for Proton Exchange Membranes

In situ polymerization: A novel route for thermally stable proton-conductive membranes

A Study on the Synthesis and Proton Transport Behavior of Multilayered ZSM-5 Zeolite Nanosheet Membranes Laminated on Polymer Substrates

Hybrid Proton Conducting Membranes Based on Sulfonated Cross-Linked Polysiloxane Network for Direct Methanol Fuel Cell

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Effective proton transport and anti-free radical oxidation: construction of interpenetrating network via co-crosslinking polybenzimidazole with proton conductors

Proton Conductivity Improvement of Sulfonated Poly(ether Ether Ketone) Nanocomposite Membranes with Sulfonated Halloysite Nanotubes Prepared Via Dopamine-Initiated Atom Transfer Radical Polymerization

Fabrication of Silane-crosslinked Proton Exchange Membranes by Radiation and Evaluation of Fuel Cell Performance

N,N-bis(sulfopropyl)aminyl-4-phenyl Polysulfone and O,O′-bis(sulfopropyl)resorcinol-5-yl-4-phenyl Polysulfone Composite Membrane for Proton Exchange Membrane Fuel Cells

High‐Throughput Electrospinning of Unmodified and Aminated Poly(Pentafluorostyrene) for Fiber‐Reinforced Proton Exchange Membranes

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

Sulfonated polystyrene fiber network-induced hybrid proton exchange membranes.

Benzimidazole-Cross-Linked Proton Exchange Membranes for Direct Methanol Fuel Cells