Abstract:To effectively solve the problem of wastewater pollution, in this paper, corn starch, 3-chloro-2-hydroxypropyl trimethylammonium chloride (CTA), vinyl acetate (VAC), and methylacryloxyethyltrimethylammonium chloride (DMC) were used as raw material, etherifying agent, esterifying agent, and grafting monomer, respectively. A starch (St)-based natural polymer cationic flocculant (DMSt-g-DMC) was prepared via etherification, esterification, and grafting copolymerization triple modification. This study is of great significance for the removal of dyes from wastewater. There are two keys to success. First, DMSt-g-DMC not only enhances flocculation but also improves water solubility through triple modification. Second is grafting reaction, in which the number of positive charges in the main chain of the DMSt-g-DMC macromolecule is further increased and its molecular structure adjusted to give full play to its electrical neutralization, bridging, and net trapping effects on anionic dyes in the water, so as to achieve the purpose of improving the flocculation effect. The removal rates of DMSt-g-DMC were 94.1% for Acid Light Yellow G, 83.7% for Reactive Brilliant Blue X-BR, and 97.1% for Direct Lake Blue 5B. DMSt-g-DMC not only has a wide flocculation window but also maintains good flocculation performance in a wide pH range, which is conducive to the treatment of wastewater with high alkalinity and complex composition. Finally, the removal rate of dye was tested when DMSt-g-DMC and PAC were flocculated together; the dosages of DMSt-g-DMC and PAC were 70 and 100 mg/L, respectively. The removal rates of Disperse Red GS, Disperse Yellow 2G-FL, and Direct Lake Blue 5B reached 87.5, 89.8, and 95.6%, respectively. In addition, DMSt-g-DMC and PAC remained stable after a long flocculation time, which may bring far-reaching changes if applied in industrial wastewater treatment.

Study of the Application of Modified Thiourea Dioxide Discharge Agent in D5 Non‐aqueous Medium

Synthesis, Film Morphology, and Performance on Cotton Substrates of Dodecyl/piperazine Functional Polysiloxane

Study on the Reduction Properties of Thiourea Dioxide and Its Application in Discharge Printing of Polyester Fabrics

Modification of Formaldehyde-free Discharging Agent T and Its Application in White Discharge Printing of Silk Fabrics

The Effects of Particle Size and Distribution of Disperse Dye on the Dyeing Performance of PLA Blended Fabric

The Wash-off of Dyeings Using Interstitial Water Part 5: Residual Dyebath and Wash-off Liquor Generated During the Application of Disperse Dyes and Reactive Dyes to Polyester/cotton Fabric

High-efficiency Dispersant-Free Polyester Dyeing Using D5 Non-Aqueous Medium

Preparation of the Discharge Paste for Discharge Printing of Silk Fabrics with Pigments and Reactive Dyes

Effects of Powder Surface Modification and Amount of Oxide Additives on Rheological Property of Si<sub>3</sub>N<sub>4</sub> Aqueous Suspension

Application of formaldehyde-free discharge agent to pigment discharge printing of silk

Water-saving aftertreatment of reactive dyed cotton fabrics in D5 medium

Synthesis and application of novel dispersant using a dichlorotriazine azo moiety and Dodecan-1-ol

Reduction Modification of Macromolecules in Wool Fabric for Improving the Adhesion with UV-Curable MXene/PUA Conductive Coating

Brushing a superhydrophilic cross-linked coating on the metal mesh for dye separation

Dip-Coating Approach to Fabricate Durable PDMS/STA/SiO2 Superhydrophobic Polyester Fabrics

Using an eco-friendly cold pad-batch reduction pretreatment to improve the whiteness, hydrophilicity, and anti-shrinkage of wool fabric

Improved Dyeing Performance of Blue Disperse Dyes with N-Acetoxyethyl Groups in D5 Non-aqueous Media System

Preparation of Mn/Mg/Ce Ternary Ozone Catalyst and Its Mechanism for the Degradation of Printing and Dyeing Wastewater

A durable and sustainable superhydrophobic surface with intertwined cellulose/SiO2 blends for anti-icing and self-cleaning applications

Preparation of Copolymer of 2-Methacryloyloxyethyldimethyl-3-sulfonic Acid Propylammonium Hydroxide and 3-(Methacryloyloxy) Propyltrimethoxysilane and Its Dye Adsorption Properties

Preparation of Starch-Based Cationic Flocculants and Its Study on the Removal of Textile Dyes