Abstract:In this paper, various compressibility correction terms of the Spalart–Allmaras turbulence model are evaluated in hypersonic compressible flows. A unified transport equation containing six correction terms is equipped to investigate the separate and combined effects of the correction terms. The numerical results of the hypersonic flat-plate cases and corner cases are, respectively, calculated and compared with direct numerical simulation data and experimental data. By using the coarse-grained uncertainty metrics, errors on the profiles and wall coefficients are measured and analyzed in several cases. The results suggest that compressibility corrections should be applied when the strong cold-wall effect or the compressibility effect exists in the hypersonic flows. Catris and Aupoix’s correction (“Density Corrections for Turbulence Models,” Aerospace Science and Technology, Vol. 4, No. 1, 2000, pp. 1–11) and Séror, Rubin, Peigin, and Epstein’s correction (“Implementation and Validation of the Spalart–Allmaras Turbulence Model in Parallel Environment,” Journal of Aircraft, Vol. 42, No. 1, 2005, pp. 179–188) offer much more accurate predictions than other models in hypersonic corner cases. As the compressibility effect further increases, the conservation correction and Shur, Strelets, Zajkov, Gulyaev, Kozlov, and Sekundov’s compressibility correction (“Comparative Numerical Testing of One-and Two-Equation Turbulence Models for Flows with Separation and Reattachment,” 33rd Aerospace Sciences Meeting and Exhibit, AIAA Paper 1995-0863, 1995) drastically increase the prediction error of the profiles. The present work ends by emphasizing the importance of the individual and combined impacts of the correction terms for compressible flows at high Mach numbers, which may provide an understanding for developing further extensions of Spalart–Allmaras models.

Comparison Study on Different Compressibility Modifications of Turbulence Model in Supersonic Combustion Simulation

Effects of compressibility correction onγ-Reθ transition model

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Linearized Correction to a Flamelet-Based Model for Hydrogen-Fueled Supersonic Combustion

Iddes Simulation of Supersonic Combustion Using A Compressible Flamelet Modeling

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Aviation kerosene supersonic combustion in dual-mode scramjet

Assessment of Compressibility Corrections on Spalart–Allmaras Turbulence Model for High-Mach-Number Flows

Partially premixed flamelet modeling in a hydrogen-fueled supersonic combustor

Numerical Simulation of Shock-Induced-Combustion in Three-Dimensional HyShot Scramjet Model

Direct Numerical Simulation of a Supersonic Lifted Hydrogen Jet Flame: A Priori Study on Combustion Models

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor

A dynamic combustion model for supersonic turbulent combustion

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Computational Study on Compressor-Combustor Interactions for Improved Matching of a Micro Gas Turbine

Numerical Simulation of Ethylene Supersonic Combustion Using Partially Premixed Flamelet Model

Consistent Coupling of Compressibility Effects in Manifold-Based Models for Supersonic Combustion

IDDES simulation of hydrogen-fueled supersonic combustion using flamelet modeling

Quasi-one-dimensional Model of Supersonic a Combustor with Various Fuels