Abstract:The non-destructive stress measurement method is the main trend in residual stress analysis. The ultrasonic method, which utilizes the acoustoelastic effect of the longitudinal critically refracted (LCR) wave, is one of the time-saving measurement techniques. During the practical stress measurement on a workpiece, various external factors may impact the transmission of acoustic waves and the resulting stress value. This study revealed and discussed the effects of four factors on the LCR wave: surface roughness of the examined material, temperature of the material, external mechanical vibration, and surface paint. The stress coefficient was determined by comparing the offset time of the acoustic wave with the stress measured by X-ray analyzer in the zero-stress specimens, which had undergone annealing and deep cryogenic treatment. The test results indicated that the surface roughness did not affect the transition time of the acoustic wave, but it did decrease the intensity of the signal. The increase in temperature and the transition time of the acoustic wave were in a linear relationship. Mechanical vibrations from the environment would not affect the transition time or signal intensity of the acoustic wave, whereas the application of surface paint increased the transition time. Although the effect of paint on the actual workpiece could not be easily modified during stress measurement, the ultrasonic method was still suitable for monitoring the stress of a specific position of the workpiece throughout its operational lifetime. The experiment data in this study were applied to measuring the residual stress of an aluminum ship component, and the result showed a good correspondence with X-ray stress analyzer results.

Measurement Of Residual Stress With Laser-Emat Ultrasonic Method

Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition

Acoustoelastic determination of local surface stresses in polymethylmethacrylate

Electromagnetic Ultrasonic Measurement for Welding Residual Stress Detection - Comparison Between Experiment with Numerical Simulation

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Non-contact Measurements of Residual Stress Distribution and Grain Size in Titanium Alloys with Laser Ultrasonic System

Measurement of Residual Stresses in Pulsed Laser Deposited Thin Films

Effects of factors from practical workpieces on ultrasonic LCR method stress measurement

Residual strain measurement based on longitudinal to shear wave velocity ratio with a dual-mode EMAT

Ultrasonic Measurement of Residual Stress in Pre-stretched Aluminum Alloy Plate by Using Ultrasonic and Its Verification

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

Recent Progress in Residual Stress Measurement Techniques

Research on the Method of Absolute Stress Measurement for Steel Structures via Laser Ultrasonic

Residual Stress Inspection by Eu3+ Photoluminescence Piezo-Spectroscopy: an Application in Thermal Barrier Coatings

Study on numerical simulation of residual stresses induced by laser shock processing

Uniaxial stress in-situ measurement using EMAT shear and longitudinal waves: Transducer design and experiments

Ultrasonic Measurement of Axial Stress Using High-Frequency Cylindrical Guided Wave

Residual Stress Measurement on a MEMS Structure With High-Spatial Resolution

A Method to Measure Residual Stress of Liquid Molding Compound by In-Situ Characterizations

Recent progress of residual stress measurement methods: A review